Browse > Article
http://dx.doi.org/10.5658/WOOD.2020.48.5.710

Analysis of Heat Transfer Characteristics by Material Based on Closed Conditions Using Acrylic Hemispheres (II): Comparison by Type of Building Structural Materials  

YANG, Seung Min (Department of Biobased Materials, College of Agriculture and Life Science, Chungnam National University)
KWON, Jun Hyuck (Department of Biobased Materials, College of Agriculture and Life Science, Chungnam National University)
KIM, Phil Lip (Department of Biobased Materials, College of Agriculture and Life Science, Chungnam National University)
KANG, Seog Goo (Department of Biobased Materials, College of Agriculture and Life Science, Chungnam National University)
Publication Information
Journal of the Korean Wood Science and Technology / v.48, no.5, 2020 , pp. 710-721 More about this Journal
Abstract
This study used a building model made up of cement, brick, and wood to measure temperature and relative humidity for 3 days in a closed environment with a diameter of 900 mm, and performed a comparative analysis of the effect of types of building materials on the indoor temperature environment and heat transfer characteristics. The water installed inside the building model represented the person in the room and was used to assess how the environment effects the person. Wooden building model showed the lowest heat loss due to the higher thermal insulation properties than cement and brick buildings. The thermal comfort of each building model was calculated using temperature and relative humidity, and the wooden building model created a more pleasant environment than the cement and brick building models.
Keywords
finishing material (wood); temperature; humidity; comfort; heat transfer mode;
Citations & Related Records
Times Cited By KSCI : 16  (Citation Analysis)
연도 인용수 순위
1 Yang, S.M., Lee, H.J., Kang, S.G. 2020. Analysis of heat transfer characteristics by materials in closed conditions using acrylic hemisphere (I): Comparison of interior finishing materials. Journal of the Korean Wood Science and Technology 48(2): 217-230.   DOI
2 Yang, J.M., Cheon, D.Y. 2013. A study on how to improve the performance of the wall between rafters in hanok. International Journal of Ondol 2013: 283-290.
3 Jang, J.H., Lee, M., Kang, E.C., Lee, S.M. 2017. Characteristics of low density firberboards for insulation material with different adhesive (I): Thermal insulation performance and physical properties. Journal of the Korean Wood Science and Technology 45(5): 580-587.   DOI
4 Chang, K.K. 2003. Environment-friendly wood house. Review of Architecture and Building Science 47(5): 33-36.
5 Jang, J.H. 2018. The increasing number of detached houses in Seoul and its related characteristics. Ph.D. Thesis, Seoul National University, Korea.
6 Jang, J.H., Lee, M., Kang, E.C., Lee S.M. 2017. Characteristics of low density fiberboards bonded with different adhesives for thermal insulation (II): Formaldehyde‧Total volatile organic compounds emission properties and combustion shapes. Journal of the Korean Wood Science and Technology 45(5): 580-587.   DOI
7 Jang, S.K., Seo, S.Y., Park, H.J., Lim, J.Y., Lim, J.H., Lee, W.S. 2007. TVOC emission by test period from liquid phase building materials. Journal of Korean Society for Indoor Environment 4(2): 140-153.
8 Kang, Y.J., Lee, J.H., Lee, H.Y., Kim, S.M. 2017. Heating and cooling energy demand evaluating of standard houses according to layer component of masonry, concrete and wood frame using PHPP. Journal of the Korean Wood Science and Technology 45(1): 1-11.   DOI
9 Kim, S.H., Yu, S.G., Seo, J.K., Kim, S.M. 2013. Thermal performance of wooden building envelope by thermal conductivity of structural members. Journal of the Korean Wood Science and Technology 41(6): 515-527.   DOI
10 Lee, H.H., Bender, D.A. 2009. Far infrared emissivity of wood material-comparing the three heat transfer modes of wood box and aluminum box. Journal of the Korean Wood Science and Technology 37(5): 440-450.
11 Park, J.M., Kim, D.H., Suh, D.J. 2012. Recent research trends for green building thermal insulation materials. Clean Technology 18(1): 14-21   DOI
12 Lee, T.G., Yoo, D.W. 2018. A study on the characteristics of low energy houses in Korea and abroad by structure and energy performance. Architectural Institute of Korea 38(2): 32-33.
13 Ozcan, C., Korkmaz, M. 2019. Determination of relationship between thermal and mechanical properties of wood material. Journal of the Korean Wood Science and Technology 47(4): 408-417.   DOI
14 Pang, S.J., Lee, B.J., Jeong, G.Y. 2017. Insulation saving effect for korean apartment house using Cross-Laminated Timber (CLT). Journal of the Korean Wood Science and Technology 45(6): 846- 856.   DOI
15 Seo, J.K., Kang, Y.J., Kim, S.M. 2016. Wood thermal conductivity database construction for the application of building energy simulation. Journal of the Korea Furniture Society 27(2): 122-127.
16 Seo, J.K., Jeong, S.G., Kim, S.M. 2017. Thermal bridge and heat transfer analysis for each part in residential building according to construction of wood-based finishing material. Journal of the Korean Wood Science and Technology 45(3): 343-359.   DOI