Browse > Article
http://dx.doi.org/10.5658/WOOD.2018.46.1.107

A Study on the Development of Bamboo/PLA Bio-composites for 3D Printer Filament  

Shin, Yoon Jung (Department of Wood Science & Engineering, Chonnam National University)
Yun, Hyeon Ju (Department of Wood Science & Engineering, Chonnam National University)
Lee, Eun Ju (Department of Wood Science & Engineering, Chonnam National University)
Chung, Woo Yang (Department of Wood Science & Engineering, Chonnam National University)
Publication Information
Journal of the Korean Wood Science and Technology / v.46, no.1, 2018 , pp. 107-113 More about this Journal
Abstract
In this study, the 3D printer filaments were manufactured by using the representative eco-friendly material, bio-composite. Bio-composites were made by incorporating biodegradable polymer of poly lactic acid (PLA) as the matrix and bamboo flour as the filler. The bamboos which were used in this experiment are Phyllostachys bambusoides, Phyllostachys nigra var. henonis, and Phyllostachys pubescen grown in Damyang district in Korea, and the mixture ratio between bamboo flour and PLA were set 10/90, 20/80, 30/70 by weight standard. Also, tensile strength of bamboo/PLA bio-composites manufactured with three kinds of bamboo were estimated and compared. In this result, the highest estimated bio-composites was Phyllostachys bambusoides flour/PLA which mixture ratio was 10/90, that is, it was the most suitable bamboo/PLA bio-composites for manufacturing 3D printer filament.
Keywords
bamboo flour; poly lactic acid; bio-composites; 3D printer; filament; tensile strength;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 ASTM D638-08. Standard Test Method for Tensile Properties of Plastics, American Society for Testing and Materials west conshohoken, PA. United states.
2 Le Duigou, A.. Castro, M., Bevan, R.. Martin, N. 2016. 3D printing of wood fiber biocomposites: From mechanical to actuation functionality. Journal of Materials & Design 96: 106-114.   DOI
3 Lu, B.H., Li, D.C., Tian, X.Y. 2015. Development Trends in Additive Manufacturing and 3D printing. Journal of Engineering 1(1): 85-89.
4 Cho, Y.B., Cho, D.H. 2012. Effect of Bamboo Fiber Grinding on the Mechanical, Thermal, Impact, and Water Absorption Properties of Bamboo/Poly (lactic acid) Biocomposites. Journal of Adhesion and Interface 13(3): 121-130.   DOI
5 Cho, Y.B., Cho, D.H. 2016. Water Treatment Effect of Bamboo Fiber on the Mechanical Properties, Impact Strength, and Heat Deflection Temperature of Bamboo Fiber/PLA Biocomposites. Journal of Adhesion and Interface 17(3): 96-103.   DOI
6 Carrasco, F., Pages, P., Gamez Perez, J., Santana, O.O., Maspoch, M.L. 2010. Processing of poly(lactic acid): Characterization of chemical structure, thermal stability and mechanical properties. Journal of Polymer Degradation and Stability 95(2): 116-125.   DOI
7 Dong, J., Li, M.C., Zhou, L., Lee, S.Y., Mei, C.G., Xu, X.W., Qinglin, W. 2017. The influence of grafted cellulose nanofibers and postextrusion annealing treatment on selected properties of poly (lactic acid) filaments for 3D printing. Journal of Polymer Physics 55(11): 847-855.   DOI
8 Kang, K.Y., Yoon, S.L., Jeon, K.S., Park, M.S., Park, N.C. 2011. A study on the Utilization of Ingredients and Fibers from Korean Bamboo Species in Value-added Industry: Part 1. -Changes in Chemical Composition of Moso, Henon, and Timber Bamboo According to the Bamboo Ages. Journal of Technical Association of the Pulp and Paper Industry 43(3): 43-51.
9 Kang, K.Y., Yoon, S.L., Jeon, K.S. 2012. A Study on the Utilization of Ingredients and Fibers from Korean Bamboo Species in Value-added Industry: Part 2. -Preparation and Characterization of Bamboo Fibers-. Journal of Technical Association of the Pulp and Paper Industry 44(4): 69-76.   DOI
10 Kim, C.H., Kim, K.J., Eom, T.J. 2008. Properties of WPC Prepared with Various Size and Amount of Wood Particle. Journal of Technical Association of the Pulp and Paper Industry 40(3): 59-64.
11 So, W.T., Kim, Y.S., Chung, W.Y., Lee, H.W. 1999. Wood Characteristics of Phyllostachys bambusoides, Phyllostachys nigra var. henonis, and Phyllostachys pubescens Grown in Damyang District. Journal of Wood Science and Technology 27(2): 7-14.
12 Lee, J.H., Lee, B.G., Park, K.H., Bang, D.S., Jhee, K.H., Sin, M.C. 2011. Preparation and Characterization of Wood Polymer Composite by a Twin Screw Extrusion Elastomers and Composites. Journal of Rubber 46(3): 211-217.
13 Lee, S.N., Lee, B.H., Kim, H.J., Kim, S.M Eom, Y.G. 2009. Properties Evaluation of Bio-Composite by Content and Particle Size of Bamboo Flour. Journal of Korean Society Of Wood Science and Technology 37(4): 310-319.
14 Ryoko, T., Duc, M.V., Kazuya, O.B., Tatsuya, T., Toru, F., Fujiura, T. 2008. How to improve mechanical properties of polylactic acid with bamboo fibers. Journal of Materials Science 43(2): 775-787.   DOI