Browse > Article

Mechanical Properties of Plastic Waste/Cellulose Waste Composites  

Hong, Young-Keun (Department of Polymer Engineering, The University of Suwon)
Publication Information
Elastomers and Composites / v.38, no.1, 2003 , pp. 19-26 More about this Journal
Abstract
Mechanical properties of the commingled waste plastics filled with waste newspaper were studied. To improve adhesion at the interface, abietic acid was used. Tensile strength increased with fiber concentration. However the abietic acid did not have any influence on the strength. Tensile strain and impact strength as well decreased with increasing fiber level in the composite, but the abietic acid at low level of concentration with low level of fiber dramatically improved both properties. The reason seemed to be attributed to double-chemical nature of abietic acid.
Keywords
composite; waste plastic; waste newspaper;
Citations & Related Records
연도 인용수 순위
  • Reference
1 S. Takase and N. Shiraishi, 'Studies on Composites from Wood and Polypropylenes', J. Appl. Polym. Sci., 37, 645 (1989)   DOI
2 A. V. Tobolsky, 'Properties and Structure of Polymers', John Wiley and Sons, New York, 1962
3 D. W. Van Krevelen, 'Properties of Polymer', pp. 423-435, Elsevier, New York, 1990
4 M.Y.A, Fuad, R. Shukor, Z.A.M. Ishak, and A.K.M Omar, 'Rice Husk Ash as Filler in Polypropylene', Plastics, Rubber and Composites Processing and Applications, 21, 225 (1994)
5 A. K. Rana, A. MandaI, B. C. Mitra, R. Jacobson, R. Lowel, and A. N. Banerjee, 'lute Fiber-Reinforced Polypropylene Composites', J. Appl. Polym. Sci., 69, 329 (1998)
6 K. Joseph, S. Thomas, and C. Pavithran, 'Effect of Chemical Treatment on the Tensile Properties of Short Sisal Fibre-Reinforced Polyethylene Composites', Polymer, 37, 5139 (1996)
7 Y. Wang, H. C. Chan, S. M. Lai, and H. F. Shen, 'Twin Screw Compounding of PE-Wood Flour Composites', Intern. Polymer Processing, 16, 2, (2001)
8 D. Maldas, B. V. Kokta, and J. Nizio, 'Performance of Surface Modified Nutshell Flour in HDPE Composites', Intern. J. Polymeric Mater., 17. 1 (1992)
9 J. X. Rietveld and M J. Simon, 'Processability and Properties of a Wood Flour Filled Polypropylene', Intern. J. Polymeric Mater., 18, 213 (1992)   DOI   ScienceOn
10 G. Freischmidt and A. J. Michell, 'Performance of Zircoaluminate Coupling Agents in Wood Flour/ Polyolefin Composites', Polymer International, 24, 241 (1991)   DOI
11 K. L. Yam, B. K. Gogoi, C. C. Lai, and S. E. Selke, 'Composites from Compounding Wood Fibers with Recycled High Density Polyethylene', Polymer Engineering and Science, 30, 693 (1990)
12 B. Hegberg, G. Brenniman, and W. Hallenbeck, 'Mixed Plastic Recycling Technology', Noyes Publications, New Jersey, 1991
13 S. H. Hamid, 'Handbook of Polymer Degradation', Marcel Dekker, New York, 2000
14 D. Maldas, B. V. Kokta, R G. Raj, and C. Daneault, 'Improvement of the Mechanical Properties of Sawdust Wood Fibre-Polystyrene Composites by Chemical Treatment' Polymer, 29, 1256 (1988)
15 J. Wu, D. Yu, C. Chan, J. Kim, and Y. W. Mai, 'Effect of Fiber Pretreatment Condition on the Inter facial Strength and Mechanical Properties of Wood Fiber/PP Composites', J. Appl. Polym. Sci., 76, 1000 (2000)   DOI   ScienceOn
16 B. V. Korta, R. G. Raj, and C. Daneault, 'Use of Wood Flour as Filler in Polypropylene', Polym. Plast. Technol. Eng., 28, 247 (1989)   DOI
17 D. Maldas and B. V. Kokta, 'Influence of Phthalic Anhydride as a Coupling Agent on the Mechanical Behavior of Wood Fiber-Polystyrene Composites', J. Appl. Polym. Sci., 41, 185 (1990)
18 전국 폐기물 발생 및 처리 현황, 환경부, 2000