1 |
CSA O86-14. (2016). Engineering design in wood, CSA Group, Mississauga, Canada.
|
2 |
DiDomizio, M. J., Mulherin, P., and Weckman, E. J. (2016). "Ignition of wood under time-varying radiant exposures." Fire Safety Journal 82. 131-144.
DOI
|
3 |
Emberley, R., Nicolaidis, A., Fernando, D., Torero, J. L. (2016). "Changing Failure Modes of Cross-Laminated Timber." Structures in Fire, Proceedings of the 9th international conference, New Jersey, USA. 643-649.
|
4 |
Frangi, A., Fontana, M. and Mischler, A. (2004). "Shear behaviour of bond lines in glued laminated timber beams at high temperatures." Wood Science and Technology 38. 119-126. doi:10.1007/s00226-004-0223-y
DOI
|
5 |
Gales, J., Zhou, A., Smith M., Braxton, N., Smith, C., and LaMalva, K. (2018). Chapter 11: Acceptance Criterion, Structural Fire Engineering Manual of Practice, ASCE, Virginia, USA. 15 pp.
|
6 |
Hadden, R. M., Bartlett, A. I., Hidalgo, J. P., Santamaria, S., Wiesner, F., Bisby, L. A., Deeny, S., Lane, B. (2017). "Effects of exposed cross laminated timber on compartment fire dynamics." Fire Safety Journal 91. 480-489.
DOI
|
7 |
Hopkin, D., Schmid, J., Friquin, K. (2016). "Timber Structures Subject to Non-Standard Fire Exposure - Advances and Challenges." WCTE. 12 pp.
|
8 |
Jeanneret, C., Smith, M., and Gales, J. (2017). "Fire safety towards enabling timber structures in Canada." Applications of Structural Fire Engineering.
|
9 |
National Research Council of Canada, Canadian Commission on Building and Fire Codes. (2015). National Building Code of Canada, National Research Council of Canada, Ottawa, ON.
|
10 |
Lange, D., Boström, L., Schmid, J., Albrektsson, J. (2015). "The Reduced Cross Section Method Applied to Glulam Timber Exposed to Non-standard Fire Curves." Fire Technology 51. 1311-1340. doi:10.1007/s10694-015-0485-y
DOI
|
11 |
Nicolaidis, A., Emberley, R., Fernando, D., Torero, J. L. (2016). "Thermally Driven Failure Mode Changes in Bonded Timber Joints." Proceedings of World Conference on Timber Engineering, WCTE 2016, Vienna, Austria.
|
12 |
Quiquero, H., Gales, J., and Hadjisophocleous, G. (2016). "Behaviour of Char Layer in Fire-Damaged Box Section Timber Beams." Interflam 2016. 1063-1074.
|
13 |
Stanier, S.A., Blaber, J., Take, W.A. and White, D.J. (2015). "Improved image-based deformation measurement for geotechnical applications." Canadian Geotechnical Journal, 53(5): 727-739
DOI
|
14 |
Quiquero, H. and Gales, J. (2017). "Comparing timber adhesive shear strength properties after fire damage." Fire and Materials, California, USA. 556-566.
|
15 |
Reszka, P. and Torero, J. L. (2008). "In-depth temperature measurements in wood exposed to intense radiant energy," Experimental Thermal and Fluid Science 32. 1405-1411. doi:10.1016/j.expthermflusci.2007.11.014
DOI
|
16 |
Spearpoint, M. J. and Quintiere, J. G. (2001). "Predicting the piloted ignition of wood in the cone calorimeter using an integral model - effect of species, grain orientation and heat flux." Fire Safety Journal 36. 391-415.
DOI
|
17 |
Su J., Lafrance P.S., Hoehler M., and Bundy M. (2018). Fire Safety Challenges of Tall Wood Buildings - Phase 2: Task 2 & 3 - Cross Laminated Timber Compartment Fire Tests. FPRF. 397 pp.
|
18 |
Yang, J. C. et al. (2015). International R&D Roadmap for Fire Resistance of Structures: Summary of NIST/CIB Workshop, National Institute of Standards and Technology, Maryland, USA.
|