[KSCI] Korea Science Citation Index Service

http://dx.doi.org/10.4218/etrij.10.1409.0060

Partial EBG Structure with DeCap for Ultra-wideband Suppression of Simultaneous Switching Noise in a High-Speed System

Kwon, Jong-Hwa (Broadcasting & Telecommunications Convergence Research Laboratory, ETRI)
Kwak, Sang-Il (Broadcasting & Telecommunications Convergence Research Laboratory, ETRI)
Sim, Dong-Uk (Broadcasting & Telecommunications Convergence Research Laboratory, ETRI)
Yook, Jong-Gwan (School of Electrical & Electronic Engineering, Yonsei University)

Publication Information

ETRI Journal / v.32, no.2, 2010 , pp. 265-272 More about this Journal

Abstract

To supply a power distribution network with stable power in a high-speed mixed mode system, simultaneous switching noise caused at the multilayer PCB and package structures needs to be sufficiently suppressed. The uni-planar compact electromagnetic bandgap (UC-EBG) structure is well known as a promising solution to suppress the power noise and isolate noise-sensitive analog/RF circuits from a noisy digital circuit. However, a typical UC-EBG structure has several severe problems, such as a limitation in the stop band's lower cutoff frequency and signal quality degradation. To make up for the defects of a conventional EBG structure, a partially located EBG structure with decoupling capacitors is proposed in this paper as a means of both suppressing the power noise propagation and minimizing the effects of the perforated reference plane on the signal quality. The proposed structure is validated and investigated through simulation and measurement in both frequency and time domains.

Keywords

Electromagnetic bandgap (EBG); signal integrity (SI); power integrity (PI); simultaneous switching noise (SSN); decoupling capacitor (DeCap);

Citations & Related Records

Times Cited By KSCI : 1 (Citation Analysis)
Times Cited By Web Of Science : 5 (Related Records In Web of Science)
Times Cited By SCOPUS : 14

1	M. Swaminathan et al., "Power Distribution Networks for System-on-Package: Status and Challenges," IEEE Trans. Advanced Packaging, vol. 27, no. 2, May 2004, pp. 286-230. DOI ScienceOn
2	T.L. Wu, Y.H. Lin, and S.T. Chen, "A Novel Power Planes with Low Radiation and Broadband Suppression of Ground Bounce Noise Using Photonic Band-Gap Structures," IEEE Microw. Wireless Compon. Lett., vol. 14, no. 7, July 2004, pp. 337-339. DOI
3	T.L. Wu et al., "Electromagnetic Bandgap Power/Ground Planes for Wideband Suppression of Ground Bounce Noise and Radiated Emission in High-Speed Circuits," IEEE Trans. MTT, vol. 53, no. 9, Sept. 2005, pp. 2935-2942. DOI
4	HFSS V11.0, www.ansoft.com, Ansoft, USA
5	J.H. Kwon and J.G. Yook, "Partial Placement of EBG on Both Power and Ground Planes for Broadband Suppression of Simultaneous Switching Noise," IEICE Trans. Commun., vol. E92-B, no. 7, July 2009, pp. 2550-2553. DOI ScienceOn
6	B.B. Kim and D.W. Kim, "Bandwidth Enhancement for SSN Suppression Using a Spiral-Shaped Power Island and a Modified EBG Structure for $\lambda$ /4 Open Stub," ETRI J., vol. 31, no. 2, Apr. 2009, pp. 201-208. DOI ScienceOn
7	R. Abhari and G.V. Eleftheriades, "Suppression of the Parallel- Plate Noise in High-Speed Circuits Using a Metallic Electromagnetic Band-Gap Structure," IEEE MTT-S Int. Dig., June 2002, pp. 493-496.
8	B. Mohajer-Iravani and O.M. Ramahi, "Suppression of EMI and Electromagnetic Noise in Packages Using Embedded Capacitance and Miniaturized Electromagnetic Bandgap Structures with High-k Dielectrics," IEEE Trans. Advanced Packaging, vol. 30, no. 4, Nov. 2007, pp. 776-788. DOI
9	J.H. Kwon et al., "Partial Placement of Electromagnetic Bandgap Unit Cells to Effectively Mitigate Simultaneous Switching Noise," Electronics Letters, vol. 44, no. 22, Oct. 2008, pp. 1302-1303. DOI ScienceOn
10	T.L. Wu et al., "Numerical and Experimental Investigation of Radiation Caused by the Switching Noise on the Partitioned DC Reference Planes of High-Speed Digital PCB," IEEE Trans. EMC, vol. 46, no. 1, Feb. 2004, pp. 33-45.
11	T. Kamgaing and O.M. Ramahi, "A Novel Power Plane with Integrated Simultaneous Switching Noise Mitigation Capability Using High Impedance Surface," IEEE Microw. Wireless Comp. Lett., vol. 13, no. 1, Jan. 2003, pp. 21-23. DOI
12	T.H. Hubing et al., "Power Bus Decoupling on Multilayer Printed Circuit Boards," IEEE Trans. EMC, vol. 37, no. 2, May 1995, pp. 155-166.
13	S. Shahparnia and O.M. Ramahi, "Electromagnetic Interference (EMI) Reduction from Printed Circuit Boards Using Electromagnetic Band-Gap Structures," IEEE Trans. EMC, vol. 46, no. 4, Nov. 2004, pp. 580-587.
14	G.T. Lei, R.W. Techentin, and B.K. Gilbert, "High Frequency Characterization of Power/Ground-Plane Structures," IEEE Trans. MTT, vol. 47, no. 5, May 1999, pp. 562-569. DOI ScienceOn

None	(2010) IEEE antennas and wireless propagation letters Design of the Printed Slot Antenna Using Wiggly Line With Harmonic Suppression / 9 (None) , 741
2	(2010) IEEE transactions on electromagnetic compatibility Novel Electromagnetic Bandgap Array Structure on Power Distribution Network for Suppressing Simultaneous Switching Noise and Minimizing Effects on High-Speed Signals / 52 (2) , 365
2	(2010) IEEE transactions on electromagnetic compatibility Design of Optimized Multilayer PIFA With the EBG Structure for SAR Reduction in Mobile Applications / 53 (2) , 325
24	(2011) Electronics letters Enhanced EBG-patterned PDN for suppressing power plane noises / 47 (24) , 1317
5	(2010) IEICE transactions on electronics Noise Suppression Methods Using Spiral with PGS in PCB / ec96 (5) , 752
None	(2010) Applied mechanics and materials An Improved Electromagnetic Band Gap Structure for Overcoming the Simultaneous Switching Noise / 577 (None) , 469
2	(2010) IET microwaves, antennas & propagation Design of electromagnetic wave absorber using periodic structure and method to broaden its bandwidth based on equivalent circuit-based analysis / 9 (2) , 142

1	/ IEEE Antennas and Wireless Propagation Letters
2	/
3	/
4	/ IEEE Transactions on Electromagnetic Compatibility
5	/
6	/ Electronics Letters