Browse > Article

Evaluation of the Burning Properties of Various Carpet Samples by using the Cone Calorimeter and Gas Toxicity Test  

Lee, Bong-Woo (한국소방산업기술원 위험물안전부)
Kwon, Seong-Pil (한국소방산업기술원 기술개발팀)
Lee, Jang-Won (한국소방산업기술원 산업지원부)
Lee, Byoung-Ho (서울대학교 산림과학부 환경재료과학 농업생명과학연구원 바이로매스 기반 바이로소재 연구팀)
Kim, Hee-Soo (서울대학교 산림과학부 환경재료과학 농업생명과학연구원 바이로매스 기반 바이로소재 연구팀)
Kim, Hyun-Joong (서울대학교 산림과학부 환경재료과학 농업생명과학연구원 바이로매스 기반 바이로소재 연구팀)
Publication Information
Fire Science and Engineering / v.23, no.6, 2009 , pp. 1-9 More about this Journal
Abstract
In this study, the burning behaviours of five different kinds of carpet samples covered with nylon, PP (polypropylene), PTT (poly(trimethylene terephthalate)), wool fabric and NW (nylon and wool) were evaluated by using the cone calorimeter having a radiant flux of 50kW/$m^2$. And the combustion gas toxicity was evaluated according to KS F 2271 test method. As a result of the cone calorimeter test (KS F ISO 5660-1), nylon carpet samples were ignited most easily. In ignition ability or initial flammability, NW carpet samples showed the highest value. In heat release rate (HRR), fire intensity, PP carpet samples were larger than any other samples. Nylon carpet samples were the highest smoke production rate, while N/W carpet samples the lowest. The following were in mass loss rates: NW > wool > nylon > PP > PTT. CO (carbon monoxide) was one of the most toxic gases released from the combustion. PTT carpet samples gave rise to the highest CO concentration, while NW carpet samples the lowest. In addition, PP carpet samples caused the highest $CO_2$ (carbon dioxide) concentration, while NW carpet samples the lowest. Toxicity of the gas produced from carpet samples was determined by the mouse stop motion, and it resulted in the fact that the combustion gas of PTT carpet samples was more toxic than that of any other samples.
Keywords
Cone calorimeter; Flame retardancy; Smoking emission; Toxicity;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 하동명, '내장재의 발화시간, 열방출율 및 최대화염 높이의 예측을 위한 반응표면 방법론의 활용성 고찰', 한국화재소방학회논문집, 제20권, 2호, pp.33-41 (2006)
2 이근원, 김관응, '콘칼로리미터를 이용한 플라스틱 단열재의 화재 특성', 한국화재소방학회논문집, 제17권, 1호, pp.76-83(2003)
3 ISO 5660-1, 'Reaction to Fire Part 1, Rate of Heat Release from Building Products (Cone Calorimeter)', Generer(1993)
4 박영근, '고분자재료의 연소가스 독성평가에 관한 연구', 한국화재소방학회 논문지, Vol.15, No.3, pp.7-13(2001)
5 KS F 2271, '건축물의 내장 재료 및 구조의 난연성 시험 방법', 한국표준협회(2006)
6 박영근, 김동일, '가스검지법에 의한 플라스틱재료의 연소가스 독성평가', 한국화재소방학회 논문지, 제16권, 4호, pp.77-84(2002)
7 건축법 제 43조, '건축물의 내부 마감재료'(2005)
8 T. Ishikawa, I. Maki, and K. Takeda, 'Flame Retardancy of Poly(butylene terephthalate) Blended with Phosphorous Compounds', J. Appl. Polym. Sci., Vol.92, No.4, pp.2326-2333(2004)   DOI   ScienceOn
9 임홍순, 육근성, '복사열원에 의한 건축용 바닥마감재 화재시험방법에 관한 연구', 한국화재소방학회 추계학술발표논문집, pp.73-80(2002)
10 김형진, 김상철, '건축재료 방화시험의 국제동향과 관련기술의 국내적용 방안', 환경관리학회 논문집, 제8권, 4호, pp.299-308(2002)   PUBMED
11 A. De Chirico, M. Armanini, P. Chini, G. Cioccolo, F. Provasoli, and G. Audisio, 'Flame Retardants for Polypropylene Based on Lignin', Polym. Degrad. Stabil., Vol.79, No.1, pp.139-145(2003).   DOI   ScienceOn