Browse > Article
http://dx.doi.org/10.7777/jkfs.2020.40.3.85

Effect of Scrap Addition Ratio on Tensile and Solidification Cracking Properties of AC4A Aluminum Casting Alloy  

Oh, Seung-Hwan (Department of Metallurgical Eng., Pukyong National Graduate School)
Kim, Heon-Joo (Department of Metallurgical Eng., Pukyong National Univ.)
Publication Information
Journal of Korea Foundry Society / v.40, no.3, 2020 , pp. 85-96 More about this Journal
Abstract
The effect of an aluminum scrap addition ratio on the tensile and solidification cracking properties of the AC4A aluminum alloy in the as-cast state and heat-treated state were investigated in this study. Generally, the expected problem of using scrap in aluminum casting is an increase of hydrogen and Fe element inside the aluminum melt. Another issue is an oxide film which has a weak interface with the molten aluminum and acts as potent nucleation sites for internal porosity and crack initiation. Solidification cracking is one of the critical defects that must be resolved to produce high quality castings. A conventional evaluation method for solidification cracking is a relative and qualitative analysis method which does not provide quantitative data on the thermal stress in the solidification process. Therefore, a newly designed solidification cracking test apparatus was used in this study, and the device can provide quantitative data. As a result, after conducting experiments with different scrap addition ratios (0%, 20%, 35%, 50%), the tensile strengths and elongations in the as-cast state were 214, 187.7, 182.1 and 170.4MPa and 4.6%, 3.4%, 3.1% and 2.3%, respectively. In the case of the T6 heat-treated state, the tensile strengths and elongations were 314.9, 294.6, 293.1 and 271.1MPa and 5.4%, 4.6%, 3.8% and 3.1%, respectively. The strength of the solidification cracking was 3.1, 2.4, 2.2and 1.6MPa as the scrap addition ratio increases.
Keywords
Utilization of aluminum scrap; Tensile property; Solidification cracking property;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 E.M. Jung, et al., The Impact of Environmental Regulation on Materials Industries in Korea, KEITI (2016).
2 H. Koch and A.J. Franke, Transaction of the 20th International Die Casting Congress and Expostion, "Development of a super ductile high pressure die casting alloy for crash relevant parts", (1999) 11-14.
3 J.L. Jorstad, Die casting Engineer, "Future technology in aluminum die casting", 9 (2006) 18-25.
4 S. Wolf and H. Hoberg, in 3rd ASM International Conference Recycling of Metals, ASM International, Brussels (1997) 257-267.
5 M.E. Schlesinger, Aluminum Recycling - 1ed., CRC Press, London (2007).
6 J. Campbell, Castings - 2ed, Butterworth-Heinemann Ltd, Oxford (2003).
7 T.W. Clyne and G.J. Davies, Proc. Conf. on Solidifiation and Casting Metals, "Solidification and casting of metals", (1979) 275.
8 D.G. Eskin, L. Katgerman and Suyitno, Progress in Materials Science, "Mechanical properties in the semi-solid state and hot tearing of aluminum alloys", 49 (2004) 629-711.   DOI
9 A.R.E. Singer and P.H. Jennings, Journal of Internatioanl Metals, "Properties of the Al-Si-alloys at temperature in the regions of the solidus", 77 (1947) 33.
10 J. Langlais and J.E. Gruzleski, Materials Science Forum, "A novel approach to assessing the hot tearing susceptibility of aluminum alloys", 331-337 (2000) 167-172.
11 N.I. I, Matveeva KT Zavod Lab, "Hot shortness of Non- Ferrous Metals and Alloys", 11 (1957) 1362.
12 Kim HJ, J. Korea Foundry Society, "Quantitative evaluation of solidification crack strength of AC2B aluminum casting alloy", 34 (2014) 136-142.   DOI
13 S. Instone, D. StJohn and J. Grandfield, International Journal of Cast Metals Research, "New apparatus for characterising tensile strength development and hot cracking in the mushy zone", 12 (2000) 441-456.   DOI
14 G.K. Sigworth, H. Koch and P. Krug, Light Metal Symposium and Electrometallurgy, "High strength natural aging aluminum casting alloys for automotive applications", (2001) 349-358.
15 X. Dai, et al., Materials Science and Engineering A, "Effects of runner system design on the mechanical stregnth of Al-7Si- Mg alloy castings", 354 (2003) 315-325.   DOI
16 M.B. Djurdjevic, et al., Associociation of Metallurgical Engineering of Serbia, "Melt quality control at aluminum casting plants", 16 (2010) 69.
17 A. E8/E8M-16a, Standard test methods for tension testing of metallic materials, , ASTM International, PA (2016).
18 J. Campbell, Complete Casting Handbook - 2ed, Butterworth- Heinemann Ltd., Oxford (2015).
19 S. Fox and J. Campbell, Scripta Materialia, "Visulisation of oxide film defects during solidification of aluminum alloys", 43 (2000) 881-886.   DOI
20 S. Fox and J. Campbell, International Journal of Cast Metals Research, "Liquid metal quality", 14 (2002) 335-340.   DOI
21 D. Dispinar and J. Campbell, International Journal of Cast Metals Research, "Use of bi-film index as an assessment of liquid metal quality", 19 (2006) 5-17.   DOI
22 D. Dispinar and J.Campbell, Shape Casting : 2nd International Symposium, "A comparison of methods used to assess aluminium melt quality", (2007).
23 M. Jaradeh and T. Carberg, Light Metal, "Method developed for quantitative assessment of Inclusions in aluminum billets", 57 (2007) 679-684.
24 T.H. Nguyen and R.T. Foley, journal of Electrochemical Society, "The chemical natrue of aluminum corrosion, III: The dissolution mechanism of aluminum oxide aluminum powder in various eletrolytes", 127 (1980) 2563-2566.   DOI
25 M.A. El-Sayed and W.D. Griffiths, International Journal of Cast Metals Research, "Hydrogen, bifilms and mechanical properties of Al castings", 27 (2014) 282-287.
26 Kim HJ, J.Korea Foundry Society, "Effect of mold preheat temperature on solidification crack strength of AC2B aluminum alloy", 34 (2014) 162-169.   DOI
27 I. Farup and A. Mo, Metallurgical and Materials Transaction A, "Two-phase modeling of mushy zone parameters associated with hot tearing", 31A (2000) 1461-1472.
28 A. Stangeland, et al., Metallurgical and Materials Transaction A, "Thermal strain in the mushy zone related to hot tearing", 37 (2006) 705-714.   DOI
29 D. Viano, et al., Light Metal 2005, "Hot tearing in Aluminum-Copper alloys", (2005) 1069-1073.
30 R. M, D.J. M, and G. M, Metallurgical and Materials Transaction A, "A new hot-tearing criterion", 30A (1999) 449-455.
31 G.E. Dieter, Mechnical Metallurgy - 3ed, McGraw-Hill Inc., NY (1990).
32 J. Campbell, Materials Science and Technology, "Entrainment defects", 22 (2013) 127-145.   DOI
33 J.Campbell, Materials, "Cavitation during superplastic forming", 4 (2011) 1271-1286.   DOI