Thixo Extrusion and Reheating Characteristics of Semi Solid A356 Alloy |
Kim, Dae-Hwan
(Dept. of Metallical and Materials Engineering, Gyeongsang National University)
Jung, Hyun-Ju (Dept. of Metallical and Materials Engineering, Gyeongsang National University) Shim, Sung-Yong (Dept. of Metallical and Materials Engineering, Gyeongsang National University) Lim, Su-Gun (Engineering Research Institute (Gyeongsang National University)) Lee, Sang-Yong (Jinju Campus of KOREA POLYTECHNIC) |
1 | M.C. Flemings, Metall. Trans, "Numerical simulation of Semi-solid casting of an automotive component", 22 (1991) 957-981. DOI |
2 | Z. Fan, Int. Mater. Rev. "Advances in Material Forming: Esaform 10 years on", 47 (2005) 49-85. |
3 | M. Kiuchi and R. Kopp., Present and Future. Ann. CIRP, "Pitting corrosion of rheocast A356 aluminium alloy in 3.5 wt.% NaCl solution", 51 (2002) 653-670. DOI ScienceOn |
4 | Amita lyer, Squeeze casting, The future, ISS Institute Inc. (2011) 13-37. |
5 | S.Y. Shim, H.W. Park, I.S. Jeong and S.G. Lim, Sur. Rev. Lett. "The optimizing conditions by taguchi method for fabricating Semi-solid Al-Zn-Mg alloy slurry by cooling plate method", 17 (2010) 185-188. |
6 | S.Y. Shim, D.H. Kim, Y.R. Seong and S.G. Lim, Trans., "Statistical Analysis for Influence of Factors on Morphological Evolution in Semi-Solid Al-6Zn-2.5Mg-0.5Cu Alloy by Cooling Plate Method", 52 (2011) 862-867. DOI ScienceOn |
7 | S.Y. Shim, D.H. Kim, S.H. Choi, Y.H. Kim, He Bai and S.G. Lim, Met. Mater. -Int "The analysis of variance on process parameters affecting the microstructures of semi-solid Al-Zn-Mg alloy billet by cooling plate method", 16 (2010) 1009-1017. DOI |
8 | Y.O. Yoon, D.I. Jang, H.H. Jo, Y.J. Kim and S.K. Kim, RARE METALS, "Effect of thixoextrusion parameters on mechanical properties of 7003 Aluminum wrought alloy", 25 (2006) 124-128. |
9 | M.A. Bayoumi, M.I. Negm and A.M. El-Gohry, Mater. Dws. 30 (2009) 4469-4477. DOI |
10 | Y. Birol, J. Mater. Process. Technol, 207 (2008) 200-203. DOI |
11 | D.H. Kim, Y.S. Han and H.I. Lee, J. KFS, "Development of Semi-solid process(I) -Examples of actual application", 12 (1992) 108-116. |
12 | Y.S. Han, D.H. Kim and H.I. Lee, J. KFS, "Development of Semi-solid process(II) -Examples of actual application", 12 (1992) 117-124. |
13 | T.H. Kim, S.Y. Shim, H.W. Park and S.G. Lim, J. KFS, "Optimum fabrication conditions and reheating characteristic of Semi-Solid Al-Zn-Mg-(Sc) alloy by inclined cooling plate", 29 (2009) 213-219. 과학기술학회마을 |
14 | S. Ashouri, M. Nili-Ahmadabadi, M. Moradi and M. Iranpour, J. Alloys Compd., "Semi-solid microsructure evolution during reheating of aluminum A356 alloy deformed severely by ECAP", 466 (2008) 67-72. DOI |
15 | S. Kleiner, O. Beffort and P.J. Uggowitzer, J. Scripta. Mater., "Microstructure evolution during reheating of an extruded Mg-Al-Zn alloy into the semisolid state", 51 (2004) 405-410. DOI |
16 | D.H. Kim, Y.R. Sung, S.Y. Shim, S.Y. Lee, K.S. Kim and S.G. Lim, J. KFCS, "The microstructures and hot extrudability of Semi-solid AM100A magnesium alloy fabricated by cooling plate", 29 (2009) 144-149. 과학기술학회마을 |
17 | M. Kiuchi and S. Sugiyama, J. Mater. Shaping Technol. "Application of mashy state extrusion", 8 (1990) 39-51. DOI ScienceOn |
18 | Y. Birol, J. Alloys Comp., "Analysis of macro segregation in twin-roll cast aluminium strips via solidification curves", 486 (2009) 173-177. DOI |
19 | D. Liu, H.V. Atkinson and R.L. Higginson, Mater. Sci. Eng. A, "Disagglomeration in thixoformed wrought aluminium alloy 2014", 392 (2005) 73-83. DOI ScienceOn |
20 | S.J. Qum A.H. Feng, L. Geng, Z.Y. Ma and J.C. Han, Scr. Mater. "DSC analysis of liquid volume fraction and compressive behavior of the semi-solid Si3N4w/Al-Si composite", 56 (2007) 951-954. DOI ScienceOn |
21 | G.E. Dieter, Mechanical Metallurgy, the McGraw-Hill Book Company, USA (1961) 458-468. |
22 | E. Tzimas and A. Zavallangos, J. Mater. Sci. "Synthesis of lightweight metals III (ed. P. H. Froes et al.)", 35 (2000) 5319-5329. DOI ScienceOn |
23 | S.Y. Shim, Ph. D. Thesis. Gyeongsang National University, Jinju (2010) 71-81. |