Browse > Article
http://dx.doi.org/10.12925/jkocs.2014.31.2.197

A Study on the Plate for Deep Discharge in Lead Acid Battery  

Jeong, Soon-Wook (Dept. of Information & Nano Materials Engineering, Kumoh National Institute of Technology)
Ku, Bon-Keun (Dept. of Information & Nano Materials Engineering, Kumoh National Institute of Technology)
Publication Information
Journal of the Korean Applied Science and Technology / v.31, no.2, 2014 , pp. 197-202 More about this Journal
Abstract
Positive plate was composed of lead hydroxide via reaction between lead oxide and $H_2O$ and lead sulfate was formed of the reaction of lead hydroxide with sulfuric acid. And its density is $3.8g/cm^3$, $4.0g/cm^3$, $4.2g/cm^3$ and $4.4g/cm^3$ by controlling volume of refined water. Curing of positive plate is done for low ($45^{\circ}C$, 40hr, over 95% of relative humidity) & high ($80^{\circ}C$, 40hr, over 95% of relative humidity) temperature, which created 3BS & 4BS active materials. Experimental result of DOD with 100% life cycle test shows that it was not related to the density of active materials but to the low & high temperature aging of active materials. The test makes us to understand that the crystallization which is made by curing of active materials is a more of a main factor than density of active materials under the deep cycle using circumstances. The active materials which were from the high temperature curing are better for deep cycle performance.
Keywords
Lead Acid Battery; Deep Cycle; 3BS; 4BS; Life Cycle;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 M. J. Weighall, Techniques for Jar Formation of Valve-Regulated Lead-Acid Batteries, J. Power Sources, 116, p.p 219-231 (2003).   DOI   ScienceOn
2 M. Matrakova and D. Pavlov, Thermal Analysis of Lead-Acid Battery Pastes and Active Materials, J. Power Sources, 158, p.p 1004-1011 (2006).   DOI   ScienceOn
3 Y. Liu and X. Bu, Solvothermal synthesis of $\alpha$-PbO from lead dioxide and its electrochemical performance as a positive electrode material, J. Power Sources, 242, p.p 299-304 (2013).   DOI   ScienceOn
4 N. Yu and L. Gao, Electrodeposited $PbO_{2}$ thin film on Ti electrode for application in hybrid supercapacitor, Electrochemistry communications, 11, p.p 1388-2481, (2009).
5 Y. Guo, S. Tang and G. Meng, Failure modes of valve-regulated lead-acid batteries for electric bicycle applications in deep discharge, J. Power Sources, 191, p.p 127-133 (2009).   DOI   ScienceOn
6 Pan Xiaokun, Wen Haishan and Xie Lihong, Research on the pulse container formation of lead acid battery, Battery bimonthly, 35, p.p 230-231, (2005).
7 M. Saravanan, M. Ganesan and S. Ambalavanan, An in situ generated carbon as integrated conductive additive for hierarchical negative plate of lead-acid battery, J. Power Sources, 251, p.p 20-29 (2014).   DOI
8 S. Horie, K. Shimoda and K. Sugie, Lead acid battery for idling stop system, Power Conversion Conference-Nagoya, PCC'07 2007 Apr., p.p 1352-1356, (2007).
9 N. Fan, C. Sun and D. Kong, Chemical synthesis of $PbO_{2}$ particles with multiple morphologies and phases and their electrochemical performance as the positive active material, J. Power Sources, 254, p.p 323-328 (2014).   DOI   ScienceOn
10 D. Yang, J. Liu and Q. Wang, A novel ultrafine leady oxide prepared from spent lead pastes for application as cathode of lead acid battery, J. Power Sources, 257, p.p 27-36 (2014).   DOI   ScienceOn
11 W.H. Zhu, Y. Zhu and B.J. Tatarchuk, A simplified equivalent circuit model for simulation of Pb-acid batteries at load for energy storage application, Energy conversion and management, 52, p.p 2794-2799, (2011).   DOI   ScienceOn
12 Embrandiri Manoj, Isa Dino and Arehli Roselina, An electric vehicle conversion using batteries and ultracapacitors, Journal of Asian electric vehicles, 9 p.p 1521-1527, (2011).   DOI
13 P. Vishnu, R. Ajaykrishna and S. Thirumalini, Cost effective energy solution with dual battery for plug-in hybrid electric vehicle (PHEV) in a public transportation system, Industrial Electronics and Applications (ICIEA), 2012 7th IEEE Conference on 2012 July, p.p 1555-1560, (2012).
14 Jeong Soon-Wook, Ku Bon-Keun, Effects of 4BS Crystal Size on the Positive Plate Behavior in Lead Acid Battery, J. of Korean Oil Chemists' Soc., 26, p.p 335-340 (2009).
15 R. Wagner, Failure modes of valveregulated lead/acid batteries in different applications, 4th European lead battery conference, p.p 153-162 (1995).
16 S. Laruelle, Grugeon-Dewaele, L. Torcheux, A. Delahaye-Vidal, The Curing Reaction Study of the Active Material in the Lead Acid Battery, J. Power Sources, 77, p.p 83-89 (1999).   DOI   ScienceOn
17 Jenn-shing Chen, L. F. Wang, Effect of Curing on Positive-Plate Behaviour in Electric Scotter Lead/Acid Cells, J. Power Sources, 70, p.p 269-275 (1998).   DOI   ScienceOn
18 Jeong Soon-Wook, Ku Bon-Keun, Effects of 4BS Crystal Size on the Positive Plate Behavior in Lead Acid Battery, J. of Korean Oil Chemists' Soc., 26, p.p 335-340 (2009).
19 D. Pavlov, Lead/Acid Battery Positive Plates Manufactured from 4PbO.PbSO4 Pastes Prepared from Leady Oxide and Red Lead, J. Power Sources, 31, p.p 189-201 (1990).   DOI   ScienceOn
20 Ku Bon-Keun, Jeong Soon-Wook, Effects of Curing Conditions on the Chemical Compositions of Positive Plate for Lead Acid Battery Plates, J. of Korean Oil Chemists' Soc., 23, p.p 347-354 (2006).