Browse > Article
http://dx.doi.org/10.14579/MEMBRANE_JOURNAL.2021.31.3.161

Review on Antifouling Membranes with Surface-Patterning for Water Purification  

Aung, Hein Htet (Energy and Environmental Science and Engineering (EESE), Integrated Science and Engineering Division (ISED), Underwood International College, Yonsei University)
Patel, Rajkumar (Energy and Environmental Science and Engineering (EESE), Integrated Science and Engineering Division (ISED), Underwood International College, Yonsei University)
Kim, Jong Hak (Department of Chemical and Biomolecular Engineering, Yonsei University)
Publication Information
Membrane Journal / v.31, no.3, 2021 , pp. 161-169 More about this Journal
Abstract
As clean water continues to be a demand in this global water crisis, development of separation membrane technology for water purification becomes a necessity. The effectiveness of separation membranes is hindered in the water crisis due to fouling of membranes. To address this problem, the application of patterns on flat membranes via various methods have been recently studied and experimented. Patterned membranes have shown to not only reduce the fouling effects of membranes, but also increase the fluxes depending on the method and materials used. Each application has shown benefits that include, but not limited to, enhanced surface area, higher pure-water permeability, and increased number of filtration cycles. In this review, the effects of patterned membranes against antifouling is summarized and discussed.
Keywords
antifouling; patterned membrane; water permeability; filtration;
Citations & Related Records
연도 인용수 순위
  • Reference
1 K. H. Lin, J. C. Crocker, V. Prasad, A. Schofield, D. A. Weitz, T. C. Lubensky, A. G. Yodh, "Entropically driven colloidal crystallization on patterned surfaces", Phys. Rev. Lett., 85, 1770 (2000).   DOI
2 Y. Ding, S. Maruf, M. Aghajani, A. R. Greenberg, "Surface patterning of polymeric membranes and its effect on antifouling characteristics", Sep. Sci. Technol., 52, 240 (2017).   DOI
3 A. Akthakul, R. F. Salinaro, A. M. Mayes, "Antifouling polymer membranes with subnanometer size selectivity", Macromolecules, 37, 7663 (2004).   DOI
4 A. Asad, M. Rastgar, H. Nazaripoor, M. Sadrzadeh, D. Sameoto, "Durability and recoverability of soft lithographically patterned hydrogel molds for the formation of phase separation membranes", Micromachines, 11, 108 (2020).   DOI
5 Y. Ding, S. Maruf, M. Aghajani, A.R. Greenberg, "Surface patterning of polymeric membranes and its effect on antifouling characteristics", Sep. Sci. Technol., 52, 240 (2017).   DOI
6 I. M. A. Elsherbiny, A. S. G. Khalil, M. Ulbricht, "Influence of surface micro-patterning and hydrogel coating on colloidal silica fouling of polyamide thin-film composite membranes", Membranes, 9, 67 (2019).   DOI
7 X. He, T. Wang, Y. Li, J. Chen, J. Li, "Fabrication and characterization of micro-patterned PDMS composite membranes for enhanced ethanol recovery", J. Membr. Sci., 563, 447 (2018).   DOI
8 S. Wang, Z. Y. Wang, J. Z. Xia, X. M. Wang, "Polyethylene-substrateed nanofiltration membrane with in situ formed surface patterns of millimeter size in resisting fouling", J. Membr. Sci., 620, 118830 (2021).   DOI
9 S. Mazinani, A. Al-Shimmery, Y. M. John Chew, D. Mattia, "3D Printed Fouling-Resistant Composite Membranes", ACS Appl. Mater. Interfaces, 11, 26373 (2019).   DOI
10 A. Asad, M. Sadrzadeh, D. Sameoto, "Direct Micropatterning of Phase Separation Membranes Using Hydrogel Soft Lithography", Adv. Mater. Technol., 4, 1800384 (2019).   DOI
11 H. Jang, J. Kim, "Effect of Inorganic Particles on Organic Fouling in Pressurized Membrane Filtration", Membr. J., 30, 131 (2020).   DOI
12 A. Ilyas, A. Yihdego Gebreyohannes, J. Qian, D. Reynaerts, S. Kuhn, I. F. J. Vankelecom, "Micropatterned membranes prepared via modified phase inversion: Effect of modified interface on water fluxes and organic fouling", J. Colloid Interface Sci., 585, 490 (2021).   DOI
13 Q. Cao, "Anisotropic electrokinetic transport in channels modified with patterned polymer brushes", Soft Matter, 15, 4132 (2019).   DOI
14 N. U. Barambu, M. R. Bilad, Y. Wibisono, J. Jaafar, T. M. I. Mahlia, A. L. Khan, "Membrane surface patterning as a fouling mitigation strategy in liquid filtration: A review", Polym. 11, 10 (2019).   DOI
15 L. D. Tijing, J. R. C. Dizon, I. Ibrahim, A. R. N. Nisay, H. K. Shon, R. C. Advincula, "3D printing for membrane separation, desalination and water treatment", Appl. Mater. Today, 18, 100486 (2020).   DOI
16 A. Ambrosi, R. R. S. Shi, R. D. Webster, "3D-printing for electrolytic processes and electrochemical flow systems", J. Mater. Chem. A, 8, 21902 (2020).   DOI
17 D. M. Yebra, S. Kiil, K. Dam-Johansen, "Antifouling technology - Past, present and future steps towards efficient and environmentally friendly antifouling coatings", Prog. Org. Coatings, 50, 75 (2004).   DOI
18 S. P. Nunes, "Can fouling in membranes be ever defeated?", Curr. Opin. Chem. Eng., 28, 90 (2020).   DOI
19 T. Y. Kim, J. W. Rhim, "Confirmation of The Fouling Phenomena in CDI Process and The Establishment of Its Removal Process Conditions", Membr. J., 29, 276 (2019).   DOI
20 Y. Ke, W. Yuan, F. Zhou, W. Guo, J. Li, Z. Zhuang, X. Su, B. Lu, Y. Zhao, Y. Tang, Y. Chen, J. Song, "A critical review on surface-pattern engineering of nafion membrane for fuel cell applications", Renew. Sustain. Energy Rev., 145, 110860 (2021).   DOI
21 M. L. Carman, T. G. Estes, A. W. Feinberg, J. F. Schumacher, W. Wilkerson, L. H. Wilson, M. E. Callow, J. A. Callow, A. B. Brennan, "Engineered antifouling microtopographies - Correlating wettability with cell attachment", Biofouling, 22, 11 (2006).
22 M. Elimelech, W. A. Phillip, "The future of seawater desalination: Energy, technology, and the environment", Science, 333, 712 (2011).   DOI
23 N. Yanar, P. Kallem, M. Son, H. Park, S. Kang, H. Choi, "A New era of water treatment technologies: 3D printing for membranes", J. Ind. Eng. Chem., 91, 1 (2020).   DOI
24 Y. J. Won, J. Lee, D. C. Choi, H. R. Chae, I. Kim, C. H. Lee, I. C. Kim, "Preparation and application of patterned membranes for wastewater treatment", Environ. Sci. Technol., 46, 11021 (2012).   DOI
25 M. N. Issac, B. Kandasubramanian, "Review of manufacturing three-dimensional-printed membranes for water treatment", Environ. Sci. Pollut. Res., 27, 36091 (2020).   DOI
26 D. H. Nam, J. W. Rhim, "Separation Characteristics of Barium Ion in Water Using Capacitive Deionization (CDI) Process", Membr. J., 29, 355 (2019).   DOI
27 Y. Ding, J. Sun, H. W. Ro, Z. Wang, J. Zhou, N. J. Lin, M. T. Cicerone, C. L. Soles, L. G. Sheng, "Thermodynamic underpinnings of cell alignment on controlled topographies", Adv. Mater., 23, 421 (2011).   DOI
28 S. Aubert, M. Bezagu, A. C. Spivey, S. Arseniyadis, "Spatial and temporal control of chemical processes", Nat. Rev. Chem., 3, 706 (2019).   DOI
29 D. Rana, T. Matsuura, "Surface modifications for antifouling membranes", Chem. Rev., 110, 2448 (2010).   DOI
30 O. Heinz, M. Aghajani, A. R. Greenberg, Y. Ding, "Surface-patterning of polymeric membranes: fabrication and performance", Curr. Opin. Chem. Eng., 20, 1 (2018).   DOI
31 A. Al-Shimmery, S. Mazinani, J. Ji, Y. M. J. Chew, D. Mattia, "3D printed composite membranes with enhanced anti-fouling behaviour", J. Membr. Sci., 574, 76 (2019).   DOI