1 |
U. Balachandran, T. H. Lee, L. Chen, S. J. Song, J. J. Picciolo, and S. E. Dorris, "Hydrogen separation by dense cermet membranes", Fuel, 85, 150 (2006).
DOI
ScienceOn
|
2 |
R. C. Hurlbert and J. O. Konecny, "Diffusion of hydrogen through palladium", J. Chem. Phys., 34, 655 (1961).
DOI
|
3 |
S. E. Nam and K. H. Lee, "Fabrication and application of palladium-based alloy composite membranes", J. Korean Ind. Eng. Chem., 13, 199 (2002).
|
4 |
S. Okada, A. Mineshige, T. Kikuchi, M. Kobune, and T. Yazawa, "Cermet-type hydrogen separation membrane obtained from fine particles of high temperature proton-conductive oxide and palladium", Thin Solid Films, 515, 7342 (2007).
DOI
ScienceOn
|
5 |
S. I. Jeon, J. H. Park, S. J. Lee, and S. H. Choi, "Fabrication and stability of V/YSZ cemlet membrane for hydrogen separation", Membrane Journal, 20, 62 (2010).
|
6 |
S. J. Lee, S. I. Jeon, and J. H. Park, "Fabrication and stability of Pd coated Ta/YSZ cermet membrane for hydrogen separation", Membrane Journal, 20, 69 (2010).
|
7 |
T. Ozaki, Y. Zhang, M. Komaki, and C. Nishimura, "Preparation of palladium-coated V and V-15Ni membranes for hydrogen purification by electroless plating technique", Int. J. Hydrog. Energy, 28, 297 (2003).
DOI
ScienceOn
|
8 |
K. Takeuchi, C. K. Loong, J. W. Richardson, J. Guan, S. E. Dorris, and U. Balachandran, "The crystal structures and phase transitions in Y-doped their dependence on Y concentration and hydrogen doping", Solid State Ion., 138, 63 (2000).
DOI
|
9 |
O. Iyoha, R. Enick, R. Killmeyer, and B. Morreale, "The influence of hydrogen sulfide-to-hydrogen partial pressure ratio on the sulfidization of Pd and 70 mol% Pd-Cu membranes", J. Membr. Sci., 305, 77 (2007).
DOI
|
10 |
M. V. Mundschau, X. Xie, and A. F. Sammells, "Carbon dioxide capture for storage in deep geologic formations", pp. 291-306, Elsevier Science, Amsterdam (2005).
|
11 |
J. Luyten, A. Buekenhoudt, W. Adriansens, J. Cooymans, H. Weyten, F. Servaes, and R. Leysen, "Preparation of membranes", Solid State Ion., 135, 637 (2000).
DOI
ScienceOn
|
12 |
M. Cai, S. Liu, K Efimov, J. g. Caro, A. FeldhOff, and H. Wang, "Preparation and hydrogen permeation of membranes", J. Membr. Sci., 343, 90 (2009).
DOI
|
13 |
G. C. Mather, D. Poulidi, A. Thursfield, M. J. Pascual, J. R. Jurado, and I. S. Metcalfe, "Hydrogen-permeation characteristics of a -based ceramic separation membrane: thermal, ageing and surface-modification effeets", Solid State Ion., 181, 230 (2010).
DOI
ScienceOn
|
14 |
C. Zuo, T. H. Lee, S. E. Dorris, U. Balachandran, and M. Liu, "Composite Ni-Ba membrane for hydrogen separation", J. Power Sources, 159, 1291 (2006).
DOI
ScienceOn
|
15 |
M. D. Dolan, N. C. Dave, A. Y. Ilyushechkin, L. D. Morpeth, and K. G. Mclennan, "Composition and operation of hydrogen-selective amorphous alloy membranes", J. Membr. Sci., 285, 30 (2006).
DOI
ScienceOn
|
16 |
J. Han, S. P. Yoon, S. W. Nam, T. H. Lim, S. A. Hong, and J. Kim, "A study on contamination of hydrogen permeable Pd-based membranes", Trans. of the Korean Hydrogen and New Energy Society, 14, 17 (2003).
|
17 |
J. Shu, B. P. A. Grandjean, A. Van Neste, and S. Kaliaguine, "Catalytic palladium-based membrane reactors: a review", Canadian J. Chem. Eng., 69, 1036 (1991).
DOI
|
18 |
J. H. Park and I. H. Baek, "Status and prospect of pre-combustion capture technology", KIC News, 12, 3 (2009).
|
19 |
J. W. Phair and S. P. S. Badwal, "Review of proton conductors for hydrogen separation", Ionics, 12, 103 (2006).
DOI
ScienceOn
|
20 |
K. H. Lee, "Membrane separation of carbon dioxide", Membrane Journal, 4, 78 (1994).
|