Browse > Article
http://dx.doi.org/10.14775/ksmpe.2022.21.01.028

Thermal Conductivity Analysis of Heating Rollers for Cable Low Dust POD Production  

Song, Young-Jun (Department of Mechanical Engineering, Gyeongsang National University)
Lim, Jong-Hak (Department of Mechanical Engineering, Gyeongsang National University)
Byun, Young-il (Department of Mechanical Engineering, Gyeongsang National University)
Hong, Seong-Min (LS Cable and System)
Jeong, Young-Hwan (LS Cable and System)
Park, Jang-Yong (Samwoncable)
Song, Chul Ki (School of Mechanical Engineering, ERI, Gyeongsang National University)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.21, no.1, 2022 , pp. 28-33 More about this Journal
Abstract
The heating roller of an actual pulse output device (POD) production facility is composed of a steel roller and a rubber roller. The time to reach a specific temperature and the temperature distribution on the roller surface were analyzed and compared according to the change in the number of cartridge heaters inside the heating roller. In this analysis, a steady-state thermal analysis of a steel roller was performed for the cases of a 5-cartridge heater and 9-cartridge heater. Finite element analysis was applied with reference to the surface temperature data of the heating roller during operation and the calorific value of the cartridge heater. Using the 9-cartridge heater, faster target temperature achievement and more uniform temperature distribution were confirmed than for the 5-cartridge heater.
Keywords
Emissivity; Convection; Radiation; Cartridge Heater;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Song, M. J., Cha, B. S., Hong, S. K., and Ko, Y. B., "Optimum design of injection mold heater ofr uniform curing of LSR seal for waterproof connector," Journal of the Korea Academy Industrial Cooperation Society, Vol. 18, No. 7, pp. 310-315, 2017.   DOI
2 Yoon, J. I., "Predicting Thermo-mechanical Characteristics from the 2nd Phase Fraction of AI-AIN Composites for LED Heat Sinks with FEM," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 5, pp. 137-142, 2018.   DOI
3 Jung, S. H., Shin, Y. I., and Song, C. K., "Finite Element Analysis of an Elongation Rolling Process for Manufacturing Seamless Pipes," Journal of the Korean Society for Precision Engineering, Vol. 31, No. 10, pp. 923-928, 2014.   DOI
4 Kim, K. S., Bang, S. K., Seo, I. H., Lee. S. Y., and Yi. C. S., "Thermal and Flow Analysis of Organic Rankine Cycle System Pipe Line for 250 kW Grade Waste Gas Heat Recovery," Journal of Korean Society of Manufacturing Process Engineers, Vol. 18, No. 4, pp. 26-33, 2019.
5 Lee, Y. U., "A Study on the Cooling Performance of Hot Forming Process using Finite Element Analysis", Journal of the Korean Society of Mechanical Technology, Vol. 19, No. 5, pp. 711-717, 2017.   DOI
6 Min, B. K., Park, C. H., and Chung, S. C., "Thermal Analysis of a Ball Screw by ADI Finite Difference Method," The Korean Society of Mechanical Engineers A, Vol. 42, No. 11, pp. 975-984, 2018.   DOI
7 Choi, D. S., and Kang, H. B., "Finite Element Analysis of Multistage Hot Forging Process During Mold Cooling," Journal of the Korean Society Manufacturing Process Engineers, Vol. 19, No. 5, pp. 75-81, 2020.   DOI
8 Kang, C. W., Kim, T. J., and Lee, C. W., "Numerical Analysis on the Characteristics of Thermal Flow in an Automobile Radiator," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 6, pp. 55-61, 2019.   DOI