Browse > Article
http://dx.doi.org/10.14775/ksmpe.2020.19.03.014

Durability Analysis of Automotive Seat Frame by Shape  

Choi, Kyekwang (Department of Metal Mold Design Engineering, Kongju National UNIV.)
Cho, Jaeung (Division of Mechanical and Automotive Engineering, Kongju National UNIV.)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.19, no.3, 2020 , pp. 14-21 More about this Journal
Abstract
The automotive seat appropriately absorbs the vibrations or shocks transmitted through a vehicle when it is in operation so as to provide a comfortable ride for passengers. In this study, the structural strength and durability of each model were investigated using structural analysis. The natural and critical frequencies at the seat were analyzed through vibration analysis. Through the results of this study on automotive seat frame models, the durability against the load and vibration is shown to be dependent on the configuration of the model.
Keywords
Automotive Seat Frame; Structural Strength; Natural Frequency; Critical Frequency;
Citations & Related Records
Times Cited By KSCI : 11  (Citation Analysis)
연도 인용수 순위
1 Cho, S. J., Han, J. W., Park, Y. J. and Lee, G. H., “Structural analysis of a planetary gear carrier in the slewing reducer for tower crane,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 5, pp. 1-7, 2014.   DOI
2 Jung, Y. S., Gao, J. C., Kim, J. Y. and You, G. J., “A Study on the Structural Analysis of Fiber Guide accept to 4C MM Optical Fiber,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 6, pp. 75-80, 2017.   DOI
3 Ko, J. H. and Kang, D. M., “CAE Analysis on Strength and Fatigue of Rear Door of Passenger Car,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 3, pp. 63-69, 2014.   DOI
4 Ha, S. H., Kim, S. J. and Song, J. I., “Structure Analysis and Torque Reduction Design of Industrial Ball Valve,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 6, pp. 37-45, 2014.   DOI
5 Lee, J. H. and Cho, J. U., “Study on Convergence Technique due to the Shape of Cruiser Board through Structural Analysis,” Journal of the Korea Convergence Society, Vol. 6, No. 4, pp. 99-104, 2015.   DOI
6 Lee, J. H. and Cho, J. U., “Study on Convergence Technique through Structural Analysis due to the Height of the Walker,” Journal of the Korea Convergence Society, Vol. 6, No. 2, pp. 19-24, 2015.   DOI
7 Her, Y. Y. and Yang, Y. J., “Structural Analysis on Development of Roller Jig for Peeling Machine,” Journal of the Korean Society of Mechanical Technology, Vol. 19, No. 2, pp. 242-248, 2017.   DOI
8 Cha, J. M., Byun, S. J. Wang, Z. H. and Kwon, Y. C., “Study on Structural and Fatigue Analysis according to Shape change of Automatic Press,” Journal of the Korean Society of Mechanical Technology, Vol. 19, No. 2, pp. 156-161, 2017.   DOI
9 Wang, J. H. and Kwon, Y. C., “Structural Analysis of Center Pillar according to Applied Load,” Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 4, pp. 401-406, 2018.   DOI
10 Wang, J. H. and Kwon, Y. C., “Structural Analysis according to Load of Height- adjustable Table,” Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 3, pp. 273-278, 2018.   DOI
11 Choi, G. G. and Cho, J. U., “A Convergence Study through Durability Analysis due to the Configuration of Automotive Frame Butted,” Journal of the Korea Convergence Society, Vol. 9, No. 11, pp. 271-276, 2018.   DOI
12 Park, J. W., “Structural Analysis of a Tractor Cabin Considering Structure Production Error,” Journal of the Korea Convergence Society, Vol. 8, No. 5, pp. 155-160, 2017.   DOI
13 Kang, H. J., Kim, B. H., Kim, B. H. and Seo, J. H., “Structural Weld Strength Analysis on Door Hinge of Field Artillery Ammunition Support Vehicle,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 3, pp. 58-65, 2016.   DOI