Browse > Article
http://dx.doi.org/10.14775/ksmpe.2019.18.12.022

Flow Analysis due to the Angle of the Front Wing on an Airplane  

Han, Moonsik (Department of Mechanical and Automotive Engineering, Keimyung UNIV.)
Cho, Jaeung (Division of Mechanical and Automotive Engineering, Kongju National UNIV.)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.18, no.12, 2019 , pp. 22-27 More about this Journal
Abstract
In this study, the flow rate and air resistance pressure were analyzed on models a, b, and c due to the front wing angle of the airplanes. Models a, b, and c have front wing angles of 120°, 100°, and 160°, respectively. The results of the flow analyses showed that the flow rate and air resistance pressure of model c were observed to be higher than models a and b. The airplane model with a larger angle to the front wing is thought to be the best model for flight. This result can be applied to development of the best in-flight airplane.
Keywords
Airplane; Flow Analysis; Front Wing Angle; Air Resistance Pressure; Structural Analysis;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 Kim, Y. C., Kim, Y. S., Kim, J., Kim, K. S., “Application of the Overset Grid Scheme (Suggar++) for Flow Analysis around a Ship,” Journal of the Society of Naval Architects of Korea, Vol. 56, No. 1, pp. 47-57, 2019.   DOI
2 Lee, Y. G., Park, I. H., Shin, J. H., Kim, S., Lee, K. Y., Choi, Y. S., “Mixed-Flow Pump Impeller-Diffuser Optimization Method by Using CFX and HEEDS,” Transactions of the Korean Society of Mechanical Engineers B, Vol. 39, No. 10, pp. 831-842, 2015.
3 Ryou, H. S., “Calculation of Two-Dimensional incompressible Turbulent Flow Along the Aerofoil,” Journal of the Korean Society for Aeronautical & Space Sciences, Vol. 18, No. 4, pp. 9-24, 1990.
4 Kim, C. H., Youn, C. B., “Aerodynamic Effect of Roof-fairing System on a Heavy-duty Truck,” International Journal of Automotive Technology, Vol. 6, No. 3, pp. 221-227, 2005.
5 Park, J. Y., Baek, S. H., Kang, J. H., “Design Criteria of Spring Stiffness for Pan Check Valve Using CFD Analysis,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 3, pp. 49-55, 2014.   DOI
6 Cho, J. U., Han, M. S., “Study on Flow and Stress Analysis of Gas Turbine Blade,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 3, pp. 67-72, 2011.
7 Yun, J. H., Jeong, I. G., Yi, C. S., Suh, J. S., “Flow Characteristics due to Cutoff Angle of Turbo-Fan for Industries,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 5, pp. 91-96, 2011.
8 Yi, C. S., “Numerical Analysis of the Kitchen Hood Ventilation System for Marine Environment,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 5, pp. 96-101, 2015.   DOI
9 Ku, H. K., Kim, J. W., Won, C., Song, J. I., “Optimization and Structure Analysis of Brake Disc for Free-fall Winch,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 55-61, 2012.
10 Wang., Z. H., Chun, C. K., Kwon, Y. C., “Study on Exhaust Air Heat Transfer Characteristics of Heat Exchange System for White Smoke Reduction,” Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 6, pp. 739-744, 2018.   DOI
11 Choi, Y. S., Kwon, Y. C., “An Experimental Study of Air-side Heat Transfer and Pressure Drop of Evaporator for Refrigerator Unit,” Journal of the Korean Society of Mechanical Technology, Vol. 21, No. 1, pp. 42-47, 2019.   DOI
12 Hwang, S. W., “A Comparison Study of Performance due to the Oil-cooler Fin Shape for Diesel Engine using Numerical Analysis,” Journal of the Korean Society of Mechanical Technology, Vol. 21, No. 1, pp. 1-7, 2019.   DOI
13 Jang, B. M., Cho, D. H., “A Study on the Flow Characteristics around Vertical Wall with Flap,” Journal of the Korean Society of Mechanical Technology, Vol. 21, No. 2, pp. 248-253, 2019.   DOI
14 Kang, H. J., Lee, H. S., “A Study on Heating and Cooling Performance Characteristics of Heat Meter for Water Source Heat Pump System,” Journal of the Korean Society of Mechanical Technology, Vol. 21, No. 2, pp. 321-326, 2019.   DOI
15 Kim, B. H., Jung, D. S., “Flow Analysis for the Sludge Pneumatic Dehydrator with Cyclone Type,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 4, pp. 1-6, 2009.