Browse > Article
http://dx.doi.org/10.14775/ksmpe.2018.17.6.151

Development of Subminiature Type 3 Composite Pressure Vessel for Cooling Unit in Electric Appliances  

Cho, Sung-Min (Institute of Gas Safety R&D, Korea Gas Safety Corporation)
Lee, Seung-kuk (Institute of Gas Safety R&D, Korea Gas Safety Corporation)
Moon, Jong-sam (Institute of Gas Safety R&D, Korea Gas Safety Corporation)
Lyu, Sung-ki (School of Mechanical & Aerospace Eng., ReCAPT, Gyeongsang National University)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.17, no.6, 2018 , pp. 151-157 More about this Journal
Abstract
In this study, we have developed a composite pressure vessel that is compact and can store refrigerant at high pressure to increase the refrigerant volume. The composite pressure vessel is made of aluminum-based duralumin, which has high rigidity and excellent elongation in the inner liner, considering the characteristics of products in the aerospace and defense industry, where the safety of the applied product is considered as a priority. High strength carbon fiber was applied to the outside. In order to evaluate the performance of the developed product, burst test and cycling test were carried out. In burst test, an excellent safety margin equivalent to 2.7 times the operating pressure was obtained. In cycling test, a stable failure mode in which 'pre-burst leak' occurs is proved and the soundness of the product is proved.
Keywords
Composite; Pressure Vessel; AL Liner; Cooling Unit; Subminiature;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Kim, B. S. et al, "Study on the Developing of Composite CNG pressure Vessel," Cryogenics, Vol. 38, Issue 1, pp. 131-134, 1998.   DOI
2 Lossie, M. and Van Brussel, H. , "Design principles in filament winding", Composite Manufacturing, Vol. 5, Issue 1, pp. 5-13, 1984.
3 Doh, Y. D. and Hong, C. S. "Progressive Failure Analysis for Filament Wound Pressure Vessel", Journal of Reinforced Plastics and Composites, Vol. 14, Issue. 12, pp. 1278-1306, 1995.   DOI
4 Mohammad, X., Kabir, M. Z., "Finite Element Analysis of Composite Pressure Vessels with a Load Sharing Metallic Liner", Composite Structure, Vol. 49, No. 3, pp. 247-255, 2000.   DOI
5 Han, K. T., "A Study on Pressure Vessel using Cold Stretch Method", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 1, pp. 153-160, 2018.
6 Kong, C. W et al, "Design of Composite Pressure Vessels with Metallic and Plastic Liners", Key Engineering Materials, Vol. 261, pp. 1505-1510, 2004.
7 Cho, S. M., Kim, K. S., Cho, M. S., Lee, S. K., Lee, S. K., Lyu S. K., “A Study on Failure Modes of Type4 Composite Pressure Cylinders according to Shapes of Domes,” The Korea Society of Manufacturing Process Engineers, Vol. 16, No. 5, pp. 13-18, 2017.   DOI
8 Lee B. Y., "Fatigue Evaluation of Steam Separators of Heat Recovery Steam Generators According to the ASME Boiler and Pressure Vessel Code," The Korea Society of Manufacturing Process Engineers, Vol. 17, No. 4, pp. 150-159, 2018.   DOI