Browse > Article
http://dx.doi.org/10.14775/ksmpe.2018.17.1.008

A Study on the Drilling Performance of the Assembly Machine for the an Aircraft's Main Wings  

Hong, Seong-Min (Department of Mechanical Convergence Engineering, Graduate School, Gyeongsang National Univ.)
Park, Dae-Hun (Department of Mechanical and Aerospace Engineering, Graduate School, Gyeongsang National Univ.)
Han, Sung-Gil (Department of Mechanical and Aerospace Engineering, Graduate School, Gyeongsang National Univ.)
Song, Chul-Ki (School of Mechanical Engineering, ERI, Gyeongsang National Univ.)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.17, no.1, 2018 , pp. 8-15 More about this Journal
Abstract
Recently, the manufacturing market for low-cost airlines has led to an increase in aircraft demand. Most processes in the production of these aircrafts are manual such as drilling, sealing, and swaging. A drilling and riveting machine is a numerical-control based equipment that automatically performs drilling, sealing, and swaging operations. The accuracy of the drilled holes and the exit burr length has a significant impact on the quality of the aircraft wing during assembly. This study was conducted to identify the conditions necessary to maintain a uniform quality by controlling the rotation speed of the spindle, which directly affects the hole diameter and the quality of the exit burr.
Keywords
Drilling and Riveting Machine; Hole Diameter; Exit Burr; Process Capability;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Boeing, Orders & Deliveries, 2015.
2 Airbus, Airbus Annual Report, 2015.
3 Rou, H. J., "A Study on the Optimization of Drilling Operations(II) : Optimization Drilling Sequence Selection for Producing a Hole," IE interface, Vol. 12, No. 2, pp. 346-353, 1999.
4 Yang, H. J., Lee, J. H. and Seo, J. H., "Performance of Assembled-type Drills," Journal of The Korean Society of Manufacturing Technology Engineers, Vol. 24, No. 2, pp. 238-243, 2015.   DOI
5 Ko, S. L., Bae, J. G. and Lee, J. K., "Analysis on Burr Formation in Drilling with New Concept Drill," Journal of Korean Society of Precision Engineering, Vol. 17, No. 3, pp. 114-121, 2000.
6 Kim, S. I., Choi, W. S., Son, J. H., Jang, E. S. and Lee, Y. M., "Analyses of Shear and Frictional Characteristics in Drilling Process," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 6, pp. 22-27, 2012.
7 Park, D. S. and Jeong, Y. H. "Study on Tool Wear and Cutting Forces by Tool Properties in CFRP Drilling," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 4, pp. 83-88, 2017.
8 Kim, G. S., "A Study on the Quality Management Performance through the 6-sigma Program," Journal of the Korean Society for Quality Management, Vol. 27, No. 4, pp. 266-279, 1999.
9 Lee, C. H. "On the Confidence Region of Vector-valued Process Capability Indices Cp & Cpk," M.Sc Thesis, Chungbuk National University, 2002.
10 Song, J. D. and Bae, H. S., "Control of PPM Level for High Quality Assurance," Journal of the Korea Academic Association of Business Administration, Vol. 18, No. 18, pp. 217-233, 1998.
11 Lee, K. K, Ro, Y. C., and Han, S. H., "Tolerance Optimization of Design Variables in Lower Arm by Using Response Surface Model and Process Capability Index," Journal of Computational Design and Engineering, Vol. 18, No. 5, pp. 359-366, 2013.
12 Lee, K. K., Park, C. K., and Han, S. H., "Six Sigma Robust Design for Railway Vehicle Suspension," Transactions of the Korean Society of Mechanical Engineers A, Vol. 33, No. 10, pp. 1132-1138, 2009.   DOI
13 Lee, K. K., Park, C. K., Kim, G. Y., Lee, K. H., Han, S. W. and Han, S. H., "Solving Probability Constraint in Robust Optimization by Minimizing Percent Defective," Transactions of the Korean Society of Mechanical Engineers A, Vol. 37, No. 8, pp. 975-981, 2013.   DOI
14 Bae, J. G. Park, H. Y. Kwon, B. C. and Ko, S. L., "Determination of Cutting Conditions for an Efficient Deburring Process Using a New Deburring Tool," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 4, pp. 109-117, 2016.   DOI