Browse > Article
http://dx.doi.org/10.14775/ksmpe.2016.16.1.024

Injury Assessment and Analysis under Blast Load Using MADYMO  

Choi, Ho-Min (School of Mechanical and Aerospace Engineering, ERI, Gyeongsang National University)
Kim, Jae-Ki (School of Mechanical and Aerospace Engineering, ERI, Gyeongsang National University)
Pack, In-Seok (School of Mechanical and Aerospace Engineering, ERI, Gyeongsang National University)
Lee, In-Young (School of Mechanical and Aerospace Engineering, ERI, Gyeongsang National University)
Kwon, Dae-Ryeong (School of Mechanical and Aerospace Engineering, ERI, Gyeongsang National University)
Lee, Seok-Soon (School of Mechanical and Aerospace Engineering, ERI, Gyeongsang National University)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.16, no.1, 2017 , pp. 24-29 More about this Journal
Abstract
There is a need for explosion experiments for explosion-related research. However, there are many restrictions in performing an actual experiment. Therefore, in this paper, an alternative method of overcoming the constraints of an explosion experiment has been conducted using a passenger behavior analysis program called MADYMO to assess and analyze the human body injury due to explosion load. To increase the reliability of the analysis, a drop test has been conducted with the analysis. We provide a new framework for performing the analysis. In future, we will further develop our research with the goal of reducing the opportunity cost for the study of the human body injury.
Keywords
MADYMO; Drop Test; Dummy Model; Shock Absorber; Blast Analysis;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Kim, K. C., "Numerical investigation of the blast effect on structures," A Master's Thesis, KAIST, Republic of Korea, 2012.
2 Han, M. S. and Cho, J. U., "A Study on the Analysis of Thermal Durability due to the Configuration of Mortar," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp. 69-76, 2015.   DOI
3 Jung, S. C., Park, T. S., Hur, N. S. and Kim, I. W., "CAE/CFD Analysis and Design of High-Pressure Drop Control Valve for Offshore Project," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 5, pp. 42-49, 2015.   DOI
4 Han, M. S. and Cho, J. U., "A Study on Durability of Under Bar at Car through Structural and Fatigue Analysis," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp. 38-44, 2015.   DOI
5 Kim, Y. J., "FE Analysis of Forging Process for Improving Tool Life in Hot Forging of CV Joint Outer Race," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 3, pp. 56-62, 2014.   DOI