Browse > Article
http://dx.doi.org/10.14775/ksmpe.2016.15.6.009

A Study on the Development of an Automatic Strip Machine for Removing Mobile Phone Glass Protective Films  

Choi, Wang-Kug (Department of Mechanical Engineering, Graduate School of Industry, Kumoh National Institute of Technology)
Hur, Jang-Wook (Department of Mechanical System Engineering, Kumoh National Institute of Technology)
Kim, Dong-Wook (Department of Integrated Logistics Support, Army Logistics Command)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.15, no.6, 2016 , pp. 9-15 More about this Journal
Abstract
Due to material-specific vulnerabilities, the surfaces of the liquid crystal glasses used in mobile phones can crack easily, with even the smallest cracks undergoing propagation. To protect the glass surfaces, films are attached to the surfaces during the mobile phone production process. However, after machining the liquid crystal, removal of the film on the liquid crystal surface using chemical and mechanical methods is required. In this research, a peeling apparatus was developed for removing the films attached to liquid crystal surfaces during the production process. Mechanical attachment and design automation through experimentation and finite element modelling were performed to confirm the validity of the design.
Keywords
Automatic Strip Machine; Mobile Phone; Protective Film; Strip Tape; Gap Block; Damper Unit;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 Bae, Y. B., Kim, K. Y., Cha, H. S., and Shin, 1. Bae, Y. B., Kim, K. Y., Cha, H. S., and Shin, D. W. "Modular, Conveyor System, Process, Production Process of the Modular", Korean Journal of Construction Engineering and Management, Vol. 15, No. 5, pp. 103-112, 2012.   DOI
2 Whang, K. H., Shin, B. C., and Choi, Y. K., "Stripping Machine Development for Film of Mobile Phone Glass", Proceedings of KSMPE Spring Conference, pp. 184, 2015.
3 Kim, S. Y., and Lee, C. W., "Study on the Radial Stress Considering Mechanical Characteristics in Wound Rolls", Journal of the Korean Society for Precision Engineering, Vol. 33, No. 2, pp. 115-119, 2016.   DOI
4 Lee, C. W., "Effect of Taper Tension Profiles on Radial Stress of a Wound Roll-to-roll Winding Process", Journal of the Korean Society for Precision Engineering, Vol. 31, No. 2, pp. 125-131, 2014.   DOI
5 Han, W. H., Jung, H. S., Lee, M. H., "A Study on External Effects on Peeling-off Behavior of Behavior of Adhesive Tape" Adhesion-interface, Vol. 13, No. 1, pp. 9-16, 2012.   DOI
6 Yang, H. C., Yun, S. C., and Han, C. S., "A study on the Design of a Robust Tension Controller in a Film", Journal of the Korean Society for Precision Engineering, Vol. 18, No. 10, pp. 327-331, 2001.
7 Kang, M. C., Lee, C. H. and Kim, N. K., "Wire-tension Control System using Photo-interrupter Sensor and Micro-electrode Fabrication," Journal of the Korean Society of Marine Engineering, Vol. 12, No. 3, pp. 28-35, 2013.
8 Shin K. H., and Kwon S. O. "Longitudinal Tension Control at Start and Stop in a Multi-span Continuous Process System", Proceedings of KSPE Autumn Conference, pp. 584-589, 1995.