1 |
Kang, H. W., Park, J. H. and Cho, D. W., "A Pixel based Solidification Model for Projection based Stereolithography Technology," Sens. Actuator A-Phys., Vol. 178, pp. 223-229, 2012.
DOI
|
2 |
Sun, K., Wei, T. S., Ahn, B. Y., Seo, J. Y., Dillon, S. J. and Lewis, J. A., "3D Printing of Interdigitated Li-Ion Microbattery Architectures," Adv. Mater., Vol. 25, No. 33, pp. 4539-4543, 2013.
DOI
|
3 |
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D. and Magdassi, S., "3D Printing of Shape Memory Polymers for Flexible Electronic Devices," Adv. Mater., 2015.
|
4 |
Seol, Y. J., Kang, T. Y., and Cho, D. W.. "Solid Freeform Fabrication Technology applied to Tissue Engineering with Various Biomaterials," Soft Matter, Vol. 8, No. 6, pp. 1730-1735, 2012.
DOI
|
5 |
Ferris, C. J., Gilmore, K. J., Beirne, S., McCallum, D. and Wallace, G. G., "Bio-ink for On-demand Printing of Living Cells," Biomater. Sci., Vol. 1, No. 2, pp. 224-230, 2013.
DOI
|
6 |
Benam, K. H., Dauth, S., Hassell, B., Herland, A., Jain, A., Jang, K. J. and Ingber, D. E., "Engineered In Vitro Disease Models," Annual Review of Pathology: Mechanisms of Disease, Vol. 10, pp. 195-262, 2015.
DOI
|
7 |
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J., Groll, J. and Hutmacher, D. W., "25th anniversary article: Engineering Hydrogels for Biofabrication," Adv. Mater., Vol. 25, No. 36, pp. 5011-5028, 2-13.
DOI
|
8 |
Khalil, S. and Sun, W., "Bioprinting Endothelial Cells with Alginate for 3D Tissue Constructs," J. Biomech. Eng., Vol. 131, No. 11, pp. 111002, 2009.
DOI
|
9 |
Kolesky, D. B., Truby, R. L., Gladman, A., Busbee, T. A., Homan, K. A. and Lewis, J. A., "3D Bioprinting of Vascularized, Heterogeneous Cell-laden Tissue Constructs," Adv. Mater., Vol. 26, No. 19, pp. 3124-3130, 2014.
DOI
|
10 |
Schuurman, W., Levett, P. A., Pot, M. W., van Weeren, P. R., Dhert, W. J., Hutmacher, D. W., Melchels, F. P. W., Klein, T. J., Malda, J., "Gelatin-Methacrylamide Hydrogels as Potential Biomaterials for Fabrication of Tissue-Engineered Cartilage Constructs," Macromolecular Biosci., Vol. 13, No. 5, pp. 551-561, 2013.
DOI
|
11 |
Duan, B., Hockaday, L. A., Kang, K. H. and Butcher, J. T., "3D Bioprinting of Heterogeneous Aortic Valve Conduits with Alginate/gelatin Hydrogels," J. Biomedical Mater. Research Part A, Vol. 101, No. 5, pp. 1255-1264, 2013.
|
12 |
Pati, F., Jang, J., Ha, D.-H., Kim, S. W., Rhie, J.-W., Shim, J.-H., Kim, D.-H. and Cho, D.-W., "Printing Three-dimensional Tissue Analogues with Decellularized Extracellular Matrix Bioink," Nat. Commun., Vol. 5, 2014.
|
13 |
Jeon, H. A., Lee, S. W. and Kwon, O. H., "Fabrication of Poly( -glutamic acid) Porous Scaffold for Tissue Engineering Applications," J. Korean Soc. Manuf. Process Eng., Vol. 13, No. 3, pp. 35-41, 2014.
DOI
|
14 |
Jeong, H. J., Jee, M.-H., Kim, S.-Y. and Lee, S.-J., "Measurement of the Compressive Force on the Knee Joint Model fabricated by 3D Printing," J. Korean Soc. Manuf. Process Eng., Vol. 13, No. 2, pp. 1-7, 2014.
DOI
|
15 |
Kesner, S. B. and Howe, R. D., "Design Principles for Rapid Prototyping Forces Sensors using 3-D Printing," IEEE-ASME Trans. Mechatron., Vol. 16, No. 5, pp. 866-870, 2011.
DOI
|
16 |
Choi, J. W. and Kim, H. C., "3D Printing Technologies - A Review," J. Korean Soc. Manuf. Process Eng., Vol. 14, No. 3, pp. 1-8, 2015.
DOI
|
17 |
Kim, J. Y., Park, J. K., Hahn, S. K. Kwon, T. H. and Cho, D. W., "Development of the Flow Behavior Model for 3D Scaffold Fabrication in the Polymer Deposition Process by a Heating Method," J. Micromech. Microeng., Vol. 19, No. 10, 105003, 2009.
DOI
|
18 |
Choi, J. S., Kang, H.-Y., Lee, I. H., Ko, T. J. and Cho, D. W., "Development of Micro-stereolithography Technology using a UV Lamp and Optical Fiber," Int. J. Adv. Manuf. Technol., Vol. 41, No. 3-4, pp. 281-286, 2009.
DOI
|
19 |
Jin, S. H., Lee, J. K., Lee, S. and Lee, K. C., "Output Characteristic of a Flexible Tactile Sensor Manufactured by 3D Printing Technique," J. Korean Soc. Precis. Eng., Vol. 31, No. 2, pp. 149-156, 2014.
DOI
|
20 |
Muth, J. T., Vogt, D. M., Truby, R. L. Menguc, Y. Kolesky, D. B., Wood, R. J. and Lewis, J. A, "Embedded 3D printing of Strain Sensors within Highly Stretchable Elastomers," Adv. Mater., Vol. 26, No. 36, pp. 6307-6312, 2014.
DOI
|
21 |
Park, J. H., Jang, J. and Cho, D. W, "Threedimensional (3D) Printed 3D Structure for Tissue Engineering," Trans. Korean Soc. Mech. Eng. B, Vol. 38, No. 10, pp. 817-829, 2014.
DOI
|
22 |
Murphy, S. V. and Atala, A., "3D Bioprinting of Tissues and Organs," Nat. Biotechnol., Vol. 32, No. 8, pp. 773-785, 2014.
DOI
|
23 |
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W. and Woo, E. P. "High-resolution Inkjet Printing of All-polymer Transistor Circuits," Science, Vol. 290, No. 5499, pp. 2123-2126, 2000.
DOI
|
24 |
Xu, T., Jin, J., Gregory, C., Hickman, J. J. and Boland, T., "Inkjet Printing of Viable Mammalian Cells," Biomater., Vol. 26, No. 1, pp. 93-99, 2005.
DOI
|