Browse > Article
http://dx.doi.org/10.14775/ksmpe.2014.13.3.096

Effects of Ultrasonic Vibration on Machined Surface of Aluminium 6061 in Endmill Cutting Process  

Jung, Myung-Won (Gyeongnam National University of Science and Technology)
Kwak, Tae-Soo (Gyeongnam National University of Science and Technology)
Kim, Myeong-Kyu (Gyeongnam National University of Science and Technology)
Kim, Geon-Hee (Korea Basic Science Institute)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.13, no.3, 2014 , pp. 96-102 More about this Journal
Abstract
This study focused on the effects of ultrasonic vibration on a machined surface of Al6061 material in the endmill cutting process. It is known that ultrasonic vibration greatly increases the efficiency of the machining process when cutting or grinding. An ultrasonic vibration table was developed for application to ultrasonic vibration endmill machining experiments.Inthisstudy,the surface roughness and actual depth of the cut measured confirm the effects of ultrasonic vibration. As a result of the experiments, the actual depth of the cut increased during endmill machining when using ultrasonic vibration. The surface roughness was improved with increases in the amplitude of the vibration and the depth of the cut.
Keywords
Endmill cutting; Ultrasonic Vibration; Surface Roughness;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 Kim, N. H., "Selection of the Optimal Machining Condition for a High-hardness Resin using the 5-axis Machine," J. of KSMPE, Vol. 11 No.5, pp. 29-34, 2012.
2 Kim, H. T. and Shin, K. H.,"A Study on the Effects of Feed rate and Shotpeening on the Fatigue Life of Al7075-T6 Specimens," Transactions of KSMTE, Vol. 16 No. 4, pp. 64-70, 2007.
3 Song, Y. C., Kenichi, T. and Toshimichi, M., "Mirror Finishing of Co-Cr-Mo Alloy by Ultrasonic Elliptical Vibration Cutting Method," J. of KSPE, Vol. 25 No. 3, pp. 56-62, 2008.   과학기술학회마을
4 Kim, K. D. and Lee, K. H., "Development of Excitation Table for 2-dimensional Vibrational Micro Cutting," J. of KSMPE, Vol. 11 No. 3, pp. 62-67, 2012.
5 Song, Y. C. and Park, C. H.,"Ultra-precision Cutting of Polycarbonate for Optical Components by Using Elliptical Vibration Cutting Method," J. of KSPE, Vol. 26 No. 6, pp. 42-49, 2009.   과학기술학회마을
6 Kim, K. D., Loh, B. G. and Kim, J. S., "Development of Ultra-Precision Ultrasonic Surface Machining Device Using Cyclic Elliptical Cutting Motion of a Couple of Piezoelectric Material," J. of KSMPE, Vol. 5 No. 3, pp. 29-35, 2006.
7 Ratmond, G. O.,"Comparison of stress-relife procedures for cryogenic aluminum mirrors," NASA Tech., Report No. 20020061280, pp. 57-70, 2002.
8 Joo, H. Y. and Lee, Y. S., "A study on Residual stress at Cutting work," J. of KSMTE, Vol. 6 No. 3, pp. 111-117, 1997.   과학기술학회마을
9 Kang, J. P., Kim, B. H. and Song, J. B.,"A Study on the Improvement of Cutting Precision by the Ultrasonic Vibration Cutting," J. of KSPE, Vol. 8 No. 2, pp. 69-77, 1991.   과학기술학회마을