Browse > Article
http://dx.doi.org/10.14775/ksmpe.2014.13.2.094

A Study on the Grinding Characteristics of AlNs Produced by Different Sintering Techniques  

Cho, Jun-Hyun (School of Engineering Science and Mechanics, KUMOH UNIV.)
Lee, Sang-Min (School of Engineering Science and Mechanics, KUMOH UNIV.)
Moon, Dong-Ju (School of Engineering Science and Mechanics, KUMOH UNIV.)
Lee, Jong-Chan (School of Engineering Science and Mechanics, KUMOH UNIV.)
Jung, Jae-Keuk (WORLDEX)
Huh, Chan (WORLDEX)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.13, no.2, 2014 , pp. 94-99 More about this Journal
Abstract
In this study, using AlN materials produced by two different sintering techniques, grinding experiments were performed under various grinding conditions, including different table speeds and cut depths. In order to measure the grinding force, a tool dynamometer was used. Surface roughness measurements and a digital microscope were also was used. The grinding forces were higher at a higher table speed and a higher cut depth. The experimental results show that the grinding characteristics of the two workpieces are similar.
Keywords
Grinding force; Surface roughness; AlN; Sintered; Pressed;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 J. H. Cho, 2014, "A study on the Grinding Characteristics of AlN", Master of Engineering, KUMOH UNIV. Republic of Korea
2 E. S. Jung, "A Study on the Grinding Characteristics of Ceramics", J. of KSMPE, Vol. 11 No. 3, pp. 86-92, 2002   과학기술학회마을
3 S. B. Ha, "A Study on the Grinding Characteristics of Ceramics", J. of KSMPE, Vol. 16, No. 10, pp. 182-186, 1999   과학기술학회마을
4 S. K. KO, "Characteristics and Applications of AlN", J of KCERS, Vol. 14, No. 1, pp. 29-34, 2011
5 Jong-Chan Lee, In-Suk You, "Abrasives grinding cutting process", Munundang, pp. 213-232, 2012.