Browse > Article
http://dx.doi.org/10.14775/ksmpe.2013.12.6.052

Durability Evaluation by Strength due to Load Direction of Press in Common Use  

Cho, Jae-Ung (Kongju National University Mechanical Engineering Dept.)
Han, Moon-Sik (Keimyung University Mechanical and Automotive Engineering Dept.)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.12, no.6, 2013 , pp. 52-59 More about this Journal
Abstract
In this study, strength and durability are investigated using structural and vibration analyses on models 1 and 2 of a press in common use. Model 1 has a structure in which a punch is applied from the upper part to the lower part; however, model 2 a structure in which a punch is applied from the lower part to the upper part. Maximum displacements of models 1 and 2 are 0.018184 mm and 0.025498 mm, respectively. Maximum equivalent stresses of models 1 and 2 are 14.144 MPa and 18.58 MPa respectively. Maximum displacements are shown for the punches of both models; model 1 has less deformation than model 2. Model 1 has more durability than model 2, as determined by an investigation of the structural strength. Using natural frequency analysis, model 1 was found to have maximum deformation in the upper part of punch. Mode1 2 has its maximum deformation in the column part of the body and the upper part of the fixed pin. Using harmonic stress analysis, the maximum deformations were found on the punch part and column part of the body in the cases of models 1 and 2, respectively. As the maximum total deformation and equivalent stress in the case of model 2 are shown to become 40 times those values of model 1, the vibration durability of model 2 can be seen to be weaker than that of model 1.
Keywords
Press; Structural analysis; Vibration analysis; Natural frequency; Harmonic stress analysis; Strength; Durability;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Choi, S. H., "Autorepair Industry of Korea," AutoJournal, Vol. 27, pp. 116-122, 2005.
2 Lee, H. S., In, J. J. and Chae, S. W., "Optimization of Automotive Body Panel Blank Holder Deformation by Structural Analysis of Press and Die Assembly," KSAE Spring Conference Proceedings, pp. 2039-2044, 2006.
3 Song, M. J., Geum, Y. T., Lee, J. M., Lee, I. K., Song, M. H. and Park, J. S., "Structural Analysis of Automotive Fender Panel Dies with Double-action Press," KSAE Fall Conference Proceedings, pp. 1153-1158, 2004.   과학기술학회마을
4 Park, H. S., Kim, S. I., Lee, W. J. and Kang, J. H., "Structural Deformation Analysis of Large Structure of Mechanical and Hydraulic Press using Servo Motor," KSMPE Fall Conference Proceedings, pp. 55, 2011.
5 Cho, J. U. and Han, M. S., "A Study on Fatigue Analysis of Automotive Shock Absorber, Journal of KSMTE, Vol. 17, No. 1, pp. 92-97, 2008.   과학기술학회마을
6 Swanson, J., ANSYS 12.0, ANSYS Inc., U.S.A, 2012.
7 Park, H. S., Kim, S. I. and Hwang, I. B., "Structural Deformation Analysis of Mechanical and Hydraulic Press using Servo Motor," KSPE Fall Conference Proceedings, pp. 291-292, 2012.   과학기술학회마을