Browse > Article

Analysis of Cutter and Design of Chip Processing System for Large Scale Machine Tool  

Lee, Jong-Moon (세영산업)
Yang, Young-Joon (경남과학기술대학교 자동차공학과)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.11, no.4, 2012 , pp. 147-153 More about this Journal
Abstract
The demands of the large scale machine tools, for instance, such as planomiller, turning machine, boring machine, NC machine, have been gradually increased in recent years. As the performances of machine tools and/or cutting tools are advanced, it is possible to perform high-speed and high-precision cutting works. The effective treatment of wet chip, which is discharged from cutting works, becomes very important problems. Therefore, this study is forced on the design of large scale machine tools using CATIA V5R18 and analysis of cutter, which is considered as essential equipment in large scale machine tools, using MSC.Nastran & MSC.Patran. Especially, the relations between tolerated load of cutter, driving horse power and rpm of driving shaft in chip processing system are investigated through analysis. As the results, the reliability of design could be improved by evaluating simulated numerical values, it showed that tolerated loads of supported part and edged part of cutter are 87,000N and 14,450N, respectively.
Keywords
Large Scale Machine Tool; Chip Processing System; Swarf Crusher; Chip Briquette System; Cutter Analysis;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 T.S. Kim, J.S. Hong, M.Y. Yang and E.S. Lee, "Development of a Large Scale 5-axis Machine Tool of Gantry Type for Multi-task Machining", Proceeding of the Korean Society for Production Manufacturing System Spring Conference, pp. 296-297, 2011.
2 E.S. Lee, M.K. Lee, J.B. Park, N.S. Kim, J.S. Ham, J.S. Hong and T.S. Kim, "Analysis for the Cross Rail Design and the Zig-Zag Motional Error in Gantry Type Machine", Journal of the Korean Society for Precision Engineering, Vol. 29, No. 2, pp. 156-160, 2012.
3 J.L. Andreasen, L.De Chiffre, "Automatic Chip-Breaking Detection in Turning by Frequency Analysis of Cutting Force", Annals of the CIRP, Vol. 42/1, pp. 45-48, 1993.
4 E.S. Jang, W.S. Choi, Y.J. Lee, T.B. Kang and Y.M. Lee, "Chip Breaking Characteristics of Cold-Drawn Free Machining Steel", Journal of the Korean Society of Machine Tool Engineering, Vol. 8, No. 4, pp. 45-51, 1999.
5 Y.M. Lee, W.S. Choi, "Chip Breaking Prediction using AE Signal", Journal of the Korean Society of Machine Tool Engineers, Vol. 8, No. 4, pp. 61-67, 1999.
6 T.J. Park, S.H. Yang, Y.M. Lee, "Temperature Analysis of Each Coolant Level by a Multiple Comparison in Turning Process", J. of KSPE, Vol. 18, No. 12, pp. 110-115, 2001.
7 S.H. Yang and Y.M. Lee, "Cutting Characteristics Depending on Coolant Level in Turning Process", Journal of the Korean Society of Precision Engineering, Vol. 21, No. 1, pp. 80-86, 2004.
8 R.B. Aronson, "Why Dry Machining", Manufacturing Engineering, Vol. 114, pp. 33-36, 1994.