Browse > Article
http://dx.doi.org/10.5139/IJASS.2015.16.4.537

Reliability Evaluation of a Pin Puller via Monte Carlo Simulation  

Lee, Hyo-Nam (Advanced Propulsion Technology Division, Agency for Defense Development)
Jang, Seung-gyo (Advanced Propulsion Technology Division, Agency for Defense Development)
Publication Information
International Journal of Aeronautical and Space Sciences / v.16, no.4, 2015 , pp. 537-547 More about this Journal
Abstract
A Monte Carlo (MC) simulation was conducted to predict the reliability of a newly developed pyrotechnic pin puller. The reliability model is based on the stress-strength interference model that states that failure occurs if the stress exceeds the strength. In this study, the stress is considered to be the energy consumed by movement of a pin shaft, and the strength is considered to be the energy generated by pyrotechnic combustion for driving the pin shaft. Failure of the pin puller can thus be defined as the consumed energy being greater than the generated energy. These energies were calculated using a performance model formulated in the previous study of the present authors. The MC method was used to synthesize the probability densities of the two energies and evaluate the reliability of the pin puller. From a probabilistic perspective, the calculated reliability was compared to a deterministic safety factor. A sensitivity analysis was also conducted to determine which design parameters most affect the reliability.
Keywords
Pin Puller; One-Shot; Reliability; Stress-Strength Model; Monte Carlo Simulation;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 O. Brauer, Handbook of Pyrotechnics. Chemical Publishing Co. Inc., New York, 1974.
2 B. H. Paul, and K. A. Gonthier, "Analysis of Gas- Dynamic Effects in Explosively Actuated Valves", Journal of Propulsion and Power, Vol. 26, No. 3, 2010, pp. 479-796.   DOI
3 H. S. Lee, "Modeling of a Hydraulically Damped Pyrotechnic Actuators", 47th AIAA Aerospace Science Meeting including the New Horizons Forum and Aerospace Exposition, AIAA, Orlando, FL, 2009, pp. 761.
4 A. M. Braud, and K. A. Gonthier, "System Modeling of Explosively Actuated Valves", Journal of Propulsion and Power, Vol. 23, No.5, 2007, pp. 1080-1095.   DOI
5 Hobin S. Lee, "Unsteady Gas-dynamics Effects in Pyrotechnic Actuators", Journal of Spacecraft and Rockets, Vol. 41, No. 5, 2004, pp.877-886.   DOI
6 S. B. Shmuel, "Performance Analysis of a Normally Closed Pyrovalve", 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, AIAA, Indianapolis, IN, 2002, pp. 3552.
7 J. D. Kutschka, "Pyrotechnically Actuated Mechanism Performance Prediction and Test Correlation", 36th AIAA/ ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, AIAA, Huntsville, AL, 2000, pp. 3513.
8 P. G. Amand, and J. A. Tiemon, "Mathematical Modeling of the Ballistic and Mechanical Behavior of Ordnance Systems", 31st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, AIAA, San Diego, CA, 1995, pp. 2853.
9 K. A. Gonthier, and J. M. Powers, "Formulation, Predictions, and Sensitivity Analysis of a pyrotechnically Actuated Pin Puller Model", Journal of Propulsion and Power, Vol. 10, No.4, 1994, pp. 501-507.   DOI
10 L. J. Bement and H. A. Multhaup, "Determining Functional Reliability of Pyrotechnic Mechanical Devices", AIAA Journal, Vol. 37, No. 3, 1999, pp. 357-363.   DOI
11 L. J. Bement, "Functional Performance of Pyrovalves", Journal of Spacecraft and Rockets, Vol. 34, No.3, 1997, pp. 391-396.   DOI
12 R. A. Johnson, "Stress-Strength Models for Reliability", Handbook of Statistics, Vol. 7: Quality Control and Reliability, Elsevier, Amsterdam: North-Holland, 1988, pp.27-54.
13 S. Kotz, Y. Lumelskii, and M. Pensky, The Stress- Strength Model and Its Generalizations: Theory and Applications, World Science, NJ.
14 D. Kececioglu, Robust Engineering Design-by- Reliability with Emphasis on Mechanical Components & Structural Reliability, Vol.1, Lancaster, Amsterdam, DEStech Publications, 2003, pp. 1-67.
15 Seung-gyo. Jang, Hyo-Nam. Lee, and Jong-yoon. Oh, "Performance Modeling of a Pyrotechnically Actuated Pin Puller", International Journal of Aeronautical and Space Science, Vol. 15, No. 1, 2014, pp.102-111.   DOI
16 E. B. Haugen, "Modern Statistical Materials Selection", Materials Engineering, Vol. 96, 1982, pp. 21-25.
17 R. Y. Rubinstein, Simulation and Monte Carlo Method, Wiley, NY, 1981, pp. 114-157.
18 O. Vinogradov, Introduction to Mechanical Reliability: A Designer's Approach, Hemisphere Publishing, New York, 1991, pp. 48.
19 H. O. Madsen, S. Krenk, and N. C. Lind (eds.), Methods of Structural Safety, Dover Publications, Inc., Mineola, 2006, pp.71.
20 R. E. Melchers, Structural Reliability Analysis and Prediction, John Wiley & Sons, Chichester, 1999, pp.19.
21 D. M. Lane, "Value of the Pearson correlation", http://onlinestatbook.com/2/describing_bivariate_data/pearson.html.