Browse > Article
http://dx.doi.org/10.7855/IJHE.2011.13.4.133

Feasibility Evaluation of Number of Gyration for HMA and WMA Mixtures  

Lee, Moon-Sup (한국건설기술연구원 도로연구실)
Yoon, Chun-Joo (한국건설기술연구원 도로연구실)
Kwon, Soo-Ahn (한국건설기술연구원 도로연구실)
Kim, Kwang-Woo (강원대학교 지역건설공학과)
Publication Information
International Journal of Highway Engineering / v.13, no.4, 2011 , pp. 133-142 More about this Journal
Abstract
The objective of this study is to validate the number of gyrations of Superpave gyratory compactor(SGC) for compaction of hot-mix asphalt (HMA) and warm-mix asphalt(WMA) mixtures. Marshall compaction was also used for comparison purpose. The 13mm and 19mm aggregates of 1st class quality shape were used. A PG64-22 and a PG76-22 for HMA and a PG70-22 for WMA. Four compaction temperatures based on the suggested value were used for each binder using 100 gyrations for SGC and 75 blows per side for Marshall compactor. It was found that SGC compaction was somewhat better than Marshall compaction. The analysis of variance showed that two compactors were significantly different in air voids of 19mm mixtures at ${\alpha}=0.05$ level. The 13mm mixture did not show a significant statistical difference. When compacted at the temperature below a certain level, however, the compaction of two compactors were fond to be proor. Therefore, observing compaction temperature above the minimum level is important to secure proper compaction work. If the minimum temperatures were maintained, 100 gyrations, which was given for HMA of arterial road pavement by the Korean Guide, was found to be appropriate compaction, showing similar or better compaction work than 75 blows per side of Marshall compaction.
Keywords
gyratory compactor; marshall compactor; number of compaction; air voids; warm mix asphalt; hot mix asphalt;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 국토해양부 (2008), "한국형 포장설계법 개발 및 포장성능 개선방안 연구" 2단계 2차년도 최종보고서
2 국토해양부 (2009), 아스팔트 혼합물 생산 및 시공 지침
3 김광우, 이문섭, 김성태, 이순제 (2002a), "소성변형과의 상관성 및 추정 모델을 통한 변형강도 시험장치변수 분석," 한국도로포장공학회 논문집, 제 4권 4호, 41-52
4 김광우, 이문섭, 김준은, 최선주 (2002b), "소성변형과의 상관성에 근거한 아스팔트 콘크리트의 변형강도 개발을 위한 기초연구," 한국도로포장공학회 논문집, 제 4권 4호, 23-39
5 김광우, 이문섭, 김중열, 이순제 (2002c), "아스팔트 콘크리트의 고온 변형저항 특성 측정방법 개발," 석재연 논문집, 제 7권, 강원대학교 석재복합신소재 연구센터.
6 김광우, 최선주, 이기호, 도영수 (2004), "온도변화에 따른 아스팔트 콘크리트의 변형강도와 소성변형과의 상관성 연구," 대한토목학회 논문집, 제 24권 5D호, 743-748.
7 김부일, 이문섭 (2007), "선회다짐기의 설계 다짐횟수 선정을 위한 연구", 한국도로학회 논문집, 제9권 4호, 227-236
8 김부일, 이문섭, 김광우 (2006), "포장성능관련 역학적 특성이 고려된 아스팔트 혼합물의 배합설계법 개발 방안", 한국도로학회 논문집, 제8권 1호, 15-23
9 이문섭 (2010), "아스팔트 혼합물의 용적 및 강도 특성에 근거한 적정 다짐온도의 결정 연구" 강원대학교 대학원 박사학위논문.
10 Kim, K. W., Amirkhanian, S. N., Kim, H. H., Lee, M. S. and Doh, Y. S., "A New Static Strength Test for Characterization of Rutting of Dense-graded Asphalt Mixtures," Journal of Testing and Evaluation, ASTM, 39(1), Jan., 2011.
11 NCHRP(2002), "NCHRP 1-37A 2002 Design Guide"
12 Oliver J.W.H. (1993). The relationship between Marshall and Gyropac compaction. ARRB Working Document No. WD RI93/011. Australian Road Research Board.