Browse > Article
http://dx.doi.org/10.5407/jksv.2019.17.2.058

Heat transfer and flow characteristics of sweeping jet issued from rectangular nozzle with thin plate  

Kim, Donguk (School of Mechanical Engineering, Pusan National University)
Jung, Jae Hoon (School of Mechanical Engineering, Pusan National University)
Seo, Hyunduk (School of Mechanical Engineering, Pusan National University)
Kim, Hyun Dong (Rolls-Royce University Technology Center, Pusan National University)
Kim, Kyung Chun (School of Mechanical Engineering, Pusan National University)
Publication Information
Journal of the Korean Society of Visualization / v.17, no.2, 2019 , pp. 58-66 More about this Journal
Abstract
This study investigated heat transfer and flow characteristics of a sweeping jet issued from a rectangular nozzle with a thin plate. A thin vertical aluminum plate was attached on outlet of fluidic oscillator to increase velocity of central area with Coanda effect and enhance heat transfer performance. From visualization and PIV experiments, sweeping jet with a thin plate has larger velocity distribution in center region than that of the normal sweeping jet while oscillating frequency is similar as the normal one. Thermographic phosphor thermometry method was used to visualize the temperature field and Nu distribution of plate with impinging sweeping jet with thin plate. Four Reynolds numbers and three jet-to-wall distances were selected as parameters. It is found that heat transfer performance in the low jet-to-wall spacing was enhanced as the cooled area was expanded. However, when the jet-to-wall spacing became greater than 8dh, heat transfer performance became similar due to reduced impinging velocity.
Keywords
Fluidic oscillator; Nozzle with thin plate; Phosphor Thermometry; Particle Image Velocimetry; Coanda effect;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Laroche, E., Fenot, M., Dorignac, E., Vuillerme, J., Brizzi, L. E., Larroya, J. C., 2017, "A combined experimental and numerical investigation of the flow and heat transfer inside a turbine vane cooled by jet impingement", J. Turbomach 140(3), 031002 (9 pages)
2 H. Wang, W. Yu, Q. Cai, 2012, "Experimental study of heat transfer coefficient on hot steel plate during water jet impingement cooling", J. Mater. Process. Technol. 212 (9) 1825-1831.   DOI
3 P.A. de Oliveira, J.R. Barbosa Jr., 2017, "Novel two-phase jet impingement heat sink for active cooling of electronic devices", Appl. Therm. Eng. 12, 952-964.
4 N. Zuckerman, N. Lior, 2006, "Jet impingement heat transfer: physics, correlations, and numerical modeling", Adv. Heat Transf. 39, 565-631.   DOI
5 S. Gartlein, R. Woszidlo, F. Ostermann, C.N. Nayeri, C.O. Paschereit, 2014, "The time resolved internal and external flow field properties of a fluidic oscillator", in:52nd AIAA Aerospace Science Meeting, p. 1143.
6 M. Koklu, 2016, "Effect of a Coanda extension on the performance of a sweeping-jet actuator", AIAA J. 54 (3), 1131-1134.   DOI
7 B.C. Bobusch, R. Woszidlo, J.M. Bergada, C.N.N. Nayeri, C.O. Paschereit, 2013, "Experimental study of the internal flow structures inside a fluidic oscillator", Exp. Fluids 54 (6), 1559.   DOI
8 C. Cerretelli, K. Kirtley, 2009, "Boundary layer separation control with fluidic oscillators", J. Turbomach., 131, p. 041001.   DOI
9 M.A. Hossain, L. Agricola, A. Ameri, J.W. Gregory, J.P. Bons, 2018, "Sweeping jet film cooling on a turbine vane", Proc. ASME Turbo Expo 2018, GT2018-77099.
10 R.B. Beale, M.T. Lawler, 1974, "in: Flow: Its Measurement and Control in Science and Industry" Instrument Society of America, pp. 989-996.
11 X. Wen, Y. Liu, H. Tang, 2018, "Unsteady behavior of a sweeping impinging jet: time resolved particle image velocimetry measurements", Exp. Therm Fluid Sci. 96, 111-127.   DOI
12 S.H. Kim, H.D. Kim, 2019, "Quantitative visualization of the three-dimensional flow structures of a sweeping jet", J. Visualization. 22, 437-447.   DOI
13 L. Agricola, M.A. Hossain, R. Prenter, R. Lundgreen, A. Ameri, J. Gregory, J.P. Bons, 2017, "Impinging sweeping jet heat transfer", in: 53rd AIAA/SAE/ASEE Joint Propulsion Conference, p. 4974.
14 T. Park, K. Kara, D. Kim, 2018, "Flow structure and heat transfer of a sweeping jet impinging on a flat wall", Int. J. Heat Mass Transf. 124, 920-928.   DOI
15 S.H. Kim, H.D. Kim, K.C. Kim, 2019, "Measurement of two-dimensional heat transfer and flow characteristics of an impinging sweeping jet", Int. J. Heat Mass Transf. 136, 415-426.   DOI
16 S.J. Yi, H.D. Kim, K.C. Kim, 2014, "Decay-slope method for 2-dimensional temperature field measurement using thermographic phosphors", Exp. Therm Fluid Sci. 59, 1-8.   DOI