Browse > Article
http://dx.doi.org/10.3365/KJMM.2011.49.8.628

Microstructural Characterization of Clad Interface in Welds of Ni-Cr-Mo High Strength Low Alloy Steel  

Kim, Hong-Eun (Nuclear Materials Research Division, KAERI)
Lee, Ki-Hyoung (Department of Materials Science and Engineering, KAIST)
Kim, Min-Chul (Nuclear Materials Research Division, KAERI)
Lee, Ho-Jin (Nuclear Materials Research Division, KAERI)
Kim, Keong-Ho (Nuclear Materials Research Division, KAERI)
Lee, Chang-Hee (Department of Materials Science and Engineering, Hanyang Univ.)
Publication Information
Korean Journal of Metals and Materials / v.49, no.8, 2011 , pp. 628-634 More about this Journal
Abstract
SA508 Gr.4N Ni-Cr-Mo low alloy steel, in which Ni and Cr contents are higher than in commercial SA508 Gr.3 Mn-Mo-Ni low alloy steels, may be a candidate reactor pressure vessel (RPV) material with higher strength and toughness from its tempered martensitic microstructure. The inner surface of the RPV is weld-cladded with stainless steels to prevent corrosion. The goal of this study is to evaluate the microstructural properties of the clad interface between Ni-Cr-Mo low alloy steel and stainless weldment, and the effects of post weld heat treatment (PWHT) on the properties. The properties of the clad interface were compared with those of commercial Mn-Mo-Ni low alloy steel. Multi-layer welding of model alloys with ER308L and ER309L stainless steel by the SAW method was performed, and then PWHT was conducted at $610^{\circ}C$ for 30 h. The microstructural changes of the clad interface were analyzed using OM, SEM and TEM, and micro-Vickers hardness tests were performed. Before PWHT, the heat affected zone (HAZ) showed higher hardness than base and weld metals due to formation of martensite after welding in both steels. In addition, the hardness of the HAZ in Ni-Cr-Mo low alloy steel was higher than that in Mn-Mo-Ni low alloy steel due to a comparatively high martensite fraction. The hardness of the HAZ decreased after PWHT in both steels, but the dark region was formed near the fusion line in which the hardness was locally high. In the case of Mn-Mo-Ni low alloy steel, formation of fine Cr-carbides in the weld region near the fusion line by diffusion of C from the base metal resulted in locally high hardness in the dark region. However, the precipitates of the region in the Ni-Cr-Mo low alloy steel were similar to that in the base metal, and the hardness in the region was not greatly different from that in the base metal.
Keywords
alloys; welding; microstructure; hardness test; heat-treatments;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
Times Cited By SCOPUS : 0
연도 인용수 순위
1 ASME B & PV Code Sec.II, Part A, SA508 (2005).
2 C. Sudha, P.V. Thomas, A.L.E. Terrance, S. Saroja, and M. Vijayalakshmi, Weld. J. 85, 71 (2006).
3 C. Sudha, A.L.E. Terrancea, S.K. Albertb, and M. Vijayalakshmi, J. Nucl. Mater. 302, 193 (2002).   DOI   ScienceOn
4 S.K. Albert, T.P.S. Gill, A.K. Tyagi, S.L. Mannan, S. D. Kulkarni, and P. Rodriguez, Weld. J. 76, 135 (1997).
5 S.G. Park, M.C. Kim, B.S. Lee, and D.M. Wee, J. Kor. Inst. Met. & Mater. 46, 771 (2008).
6 K. Suzuki, I. Kurihara, T. Sasaki, Y. Koyoma, and Y. Tanaka, Nucl. Eng. and Design 206, 261 (2001).   DOI   ScienceOn
7 K.H. Lee, M.C. Kim, B.S. Lee, and D.M. Wee, Mater. Sci. & Eng. A, 527, 3329 (2010).   DOI   ScienceOn
8 K.H. Lee, M.C. Kim, B.S. Lee, and D.M. Wee, J. Nucl. Mater. 403, 68 (2010).   DOI   ScienceOn
9 S.G. Park, M.C. Kim, B.S. Lee, and D.M. Wee, J. Nucl. Mater. 407, 126 (2010).   DOI   ScienceOn
10 T.R. Allen, P.J. King, and L. Nelson, Min. Met. & Mater. Soc. Proc. 12th Int. Conf. (2005).
11 S.H. Lee, B.C. Kim, and D.G. Kwon, Metall. Mater. Trans. A 24-5, 1133 (1993).
12 Y.S. Lee, M.C. Kim, B.S. Lee, and C.H. Lee, J. Kor. Inst. Met. & Mater. 47, 139 (2009).