Browse > Article
http://dx.doi.org/10.3365/KJMM.2011.49.12.983

Failure Analysis of Ti alloy Screws in Fixing Fractured Spines  

Choe, Byung Hak (Department of Advanced Metal and Materials Engineering, Gangneung-Wonju National University)
Kim, Moon Kyu (Department of Neurosurgery, Gangneung Asan Hospital, University of Ulsan College of Medicine)
Kim, Seong Eun (Special Alloys Group, Korea Institute of Materials Science)
Shim, Yoon Im (KBSI Gangneung Center, Gangneung-Wonju National University)
Lee, Young Jin (Department of Advanced Metal and Materials Engineering, Gangneung-Wonju National University)
Jeong, Hyo Tae (Department of Advanced Metal and Materials Engineering, Gangneung-Wonju National University)
Choi, Won Yeol (Department of Advanced Metal and Materials Engineering, Gangneung-Wonju National University)
Publication Information
Korean Journal of Metals and Materials / v.49, no.12, 2011 , pp. 983-988 More about this Journal
Abstract
Failure analyses of the screws in spinal fixation devices were carried out. The fractured screws were retrieved from a patient who had spinal surgery in the thoracic vertebrae from number 10 to 15. The failure occurred one month after the removal of the braces. Microstructures and fracture surfaces were examined by optical and scanning electron microscopy. The microstructures of the screws corresponded to annealed Ti-6Al-4V bar. However, in the vicinity of the screw surface, there was an insufficient number of fine precipitates. Fracture surfaces showed typical fatigue failure modes. Regarding the fact that no machining defects were detected, fatigue crack initiation might have been caused by the lack of precipitates near the screw surfaces. Only the fourth of five fixed screws was severely stress-concentrated by the action of the spinal bones, while the stress of the 4th screw was decreased to half of its acceptable level when the screw was supplemented by one more, which might have been fixed in the 6th vertebra under the 5th position by the switching of its position. The stress simulation was conducted by ANSYS with 3D CAD of PRO/E in order to understand the stress concentration behavior and to provide an effective spinal surgery guide.
Keywords
Ti alloy screw; fractured spines; failure analysis; microstructure; stress simulation;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 A. WhiteIII and M. Panjabi, Clinical Biomechanics of the Spine, Lippincott Comp. p. 152 (1990).
2 Dwyer A., Newtion N., and Sherwood A., Clin. Orthop 62, 192 (1969).
3 Gruca A., Protoco of the 41st Congress of Indian Orthopaedics and Traumatology, Bologna (1956).
4 Weiss M., Clin. Orthop 112, 150 (1975).
5 White A. A., Panjabi M. M., and Thomas C. L., Clin. Orthop. 128, 8 (1977).
6 Humphries A. W., Hawk W. A., and Berndt A. L., Surg. Clin. North Am. 41, 1685 (1988).
7 Magerl F. P., Stabilization of the lower thoracic lumbar spine with external skeletal fixation, Clin. Orthop. 189, 152 (1984).
8 Magerl F. P., Stabilization of the lower thoracic lumbar spine with external skeletal fixation, Clin. Orthop. 189, 608 (1984).
9 Richard C. Rice, Fatigue Design Handbook, SAE 308 (1988).
10 Jeffrey T. Fong, Fatigue Mechanisms, ASTM STP, 675, 188 (1979).
11 F. H. Neuman, Failure Analysis - Case Histories and Methodology, ASM, 466 (1983).
12 B. H. Choe, Failure Analysis, Jin Young Publisher 117 (2002)
13 HeeJin Jang, Kwi-Sub Yun, and Chan-Jin Park, Kor. J. Met. Mater. 48, 741 (2010).
14 Ho-Hyeong Jo, Geun-Hyeng Park, Won-Gi Kim, and Han-Cheol Choe, J. Kor. Inst. Met. & Mater. 47, 129 (2009).
15 B. H. Choe, S. K. Shin, S. J. Kim, Y. T. Lee, S. B. Kang, and Masuo Hagiwara, J. Kor. Inst. Met. & Mater. 11, 429 (2005).
16 B. H. Choe, J. U. Kim, H. W. Jeong, Y. T. Hyeon, S. E. Kim, Y.T. Lee, J. Kor. Inst. Met. & Mater. 42, 1 (2004).
17 George Vander Voort, ASM Handbook Vol. 09 Metallography and Microstructures, ASM International (2004).