Browse > Article

Analysis of Sliding Wear Properties for Arc-melted Intermetallic Compounds of Ni3Al, NiAl and TiAl  

Lee, Han-Young (Dept. of Advanced Materials Engineering, Keimyung University)
Kim, Tae-Jun (Dept. of Materials Engineering, Graduated School, Keimyung University)
Cho, Yong-Jae (Dept. of Materials Engineering, Graduated School, Keimyung University)
Publication Information
Korean Journal of Metals and Materials / v.47, no.5, 2009 , pp. 267-273 More about this Journal
Abstract
Three types of structural intermetallic compounds, $Ni_3Al$, NiAl and TiAl, having each single phase structure without pores were produced by arc-melting process. Their sliding wear properties were investigated against a hardened tool steel. It was shown that the wear of the intermetallic compounds was hardly occurred against the hardened tool steel. TiAl compound showed the best wear resistance among them. In this case, wear was preferentially occurred on the surface of the hardened tool steel of the mating material which has higher hardness. It could be found that the wear mode on intermetallics without pores by arc-melting process was different from that on its porous layer coated on steel by combustion synthesis.
Keywords
intermetallic compound; single phase structure; sliding wear property; arc melting;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
Times Cited By Web Of Science : 3  (Related Records In Web of Science)
Times Cited By SCOPUS : 4
연도 인용수 순위
1 T. Kimata, K. Uenishi, A. Ikenaga, and K. Kobayashi, Mater. Trans. 44, 407 (2003)   DOI   ScienceOn
2 Research group for Combustion synthesis, Chemistry of Combustion synthesis, TIC Book co, p.1-127, Osaka, (1992)
3 K. Egawa, J. Jpn. Soc. Lub. Eng. 26, 771 (1981)
4 H.-Y. Lee, A. Ikenaga, S.-H. Kim, and K.-B. Kim, Intermetallics 15, 1050 (2007)   DOI   ScienceOn
5 H.-Y. Lee, J.-K. Roe, and A. Ikenaga, Wear 260, 83 (2006)   DOI   ScienceOn
6 Materials science society of Japan, Intermetallic Compound for Materials, p.88-129, Shokabo Book Co., Tokyo (1995)
7 S. H. Song, S. K. Kim, Y. H. Hong, M. H. Oh, and D. M. Wee, Metals and Materials Int. 10, 307 (2004)   DOI   ScienceOn
8 A. Okamoto, A. Ikenaga, T. Yoshimoto, Y. Hirose, and H.-Y. Lee, J. Jpn. Foundrymen's Soc. 77, 744 (2005)
9 H. Y. Lee, J. Kor Soc. Tribo. Lub. Eng. 25, 7 (2009)
10 H. Y. Lee, Wear 256, 657 (2004)   DOI   ScienceOn
11 T. Kimata, K. Uenish, A. Ikenaga, and K. Kobayashi, Intermetallics 11, 947 (2003)   DOI   ScienceOn
12 K. Egawa, J. Jpn. Soc. Lub. Eng. 26, 424 (1981)