Browse > Article
http://dx.doi.org/10.14190/JRCR.2017.5.4.353

A Study on Viscosity Reducing of Cement-Based Materials by Replacing Byproducts and Adding Low-Viscosity Type HRWR  

Son, Bae-Geun (Department of Architectural Engineering, Engineering Research Institute, Gyeongsang National University)
Han, Dongyeop (Department of Architectural Engineering, Engineering Research Institute, Gyeongsang National University)
Publication Information
Journal of the Korean Recycled Construction Resources Institute / v.5, no.4, 2017 , pp. 353-358 More about this Journal
Abstract
The aim of this research is providing a fundamental idea on reducing viscosity of high performance cementitous materials. In rheological aspect, to determine the fluidity of the cementitious materials, both yield stress and viscosity should be controlled. For the high performance cementitious materials with low water-to-binder ratio and high volume fraction, it was difficult to reduce the viscosity with superplasticizer while reducing yield stress was relatively easy. Hence, in this research, with the goal of reducing viscosity of the cementitious materials, both ways of reducing viscosity were suggested: achieving proper combination of powder conditions, and adding low-viscosity typed water reducer. First, by replacing various byproduct powders, specifically, raw coal ash and wasted limestone powder showed favorable results on reducing viscosity of the cement paste. Regarding the low viscosity typed superplasticizer, it showed a good performance on reducing viscosity comparing with generic superplasticizer. Therefore, based on the results of this research, it is expected to provide a fundamental idea on reducing viscosity of cementitious materials by various methods.
Keywords
Plastic viscosity; Byproduct powders; Low viscosity type water HRWR; High range water reducer; High performance cement paste;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Nehdi, M., Mindess, S., Aitcin, P. (1998). Rheology of high performance concrete: effect of ultrafine particles, Cement and Concrete Research, 28(5), 687-697.   DOI
2 Wallevik, O., Wallevik, J. (2011). Rheology as a tool in concrete science: the use of rheographs and workability boxes, Cement and Concrete Research, 41(12), 1279-1288.   DOI
3 Kuder, K., Ozyurt, N., Mu, E.B., Shah, S.P. (2007). Rheology of fiber-reinforced cementitious materials, Cement and Concrete Research, 37(2), 191-199.   DOI
4 Coussot, P. (2005). Rheometry of Pastes, Suspensions, and Granular Materials, A John Wiley & Sons, INC., U.S.
5 Punkki, J., Golaszewski, J., Gjorv, O.E. (1996). Workability loss of high-strength concrete, ACI Materials Journal, 93(5), 427-431.