Browse > Article
http://dx.doi.org/10.9766/KIMST.2019.22.6.773

Influence of a Large-Eddy Breakup Device on Drag of an Underwater Vehicle  

Kim, Joon-Seok (Maritime Technology Research Institute, Agency for Defense Development)
Publication Information
Journal of the Korea Institute of Military Science and Technology / v.22, no.6, 2019 , pp. 773-783 More about this Journal
Abstract
A numerical analysis of a turbulent flow with a 'large-eddy breakup device(LEBU)' was performed to investigate the influence of the device on the drag of underwater vehicle using commercial CFD code, FLUENT. In the present study, the vehicle drag was decomposed to skin-friction coefficient(Cf) and pressure coefficient(Cp). The variation of the vehicle Cf and Cp were observed with changing location of the device and Reynolds number. As a result, the device decreased the vehicle Cf because it suppressed the turbulent characteristics behind the device. The larger Reynolds number, the higher reduction effect when the device was placed in front part of, and near the vehicle. On the other hand, the device increased/decreased the vehicle Cp with increasing/decreasing turbulent kinetic energy at recirculating flow region behind the vehicle. The total drag change by the device was caused by Cp rather than Cf.
Keywords
Drag; Computational Fluid Dynamics; Flow Control;
Citations & Related Records
연도 인용수 순위
  • Reference
1 J. Kim, "Physics and Control of Wall Turbulence for Drag Reduction," Philos. Trans. R. Soc., A 369, 1396-1411, 2011.   DOI
2 T. C. Corke, Y. Guezennec, and H. M. Nagib, "Modification in Drag of Turbulent Boundary Layers Resulting from Manipulation of Large-Scale Structures," NASA-CR-3444, 1981.
3 A. M. Savill and J. C. Mumford, "Manipulation of Turbulent Boundary Layers by Outer-Layer Devices: Skin-Friction and Flow-Visualization Results," J. Fluid Mech. 191, 389-418, 1988.   DOI
4 A. Sahlin, A. V. Johansson, and P. H. Alfredsson, "The Possibility of Drag Reduction by Outer Layer Manipulators in Turbulent Boundary Layers," Phys. Fluids 31, 2814, 1988.   DOI
5 C. Chin, R. Orlu, J. P. Monty, N. Hutchins, A. Ooi, and P. Schlatter, "Simulation of a Large-Eddy-Break-Up Device(LEBU) in a Moderate Reynolds Number Turbulent Boundary Layer," Flow, Turbul. Combust. 98, 445-460, 2017.   DOI
6 J. Kim, P. Moin, and R. Moser, "Turbulence Statistics in Fully Developed Channel Flow at Low Reynolds Number," J. Fluid Mech. 177, 133-166, 1987.   DOI
7 K. Fukagata, K. Iwamoto, and N. Kasagi, "Contribution of Reynolds Stress Distribution to the Skin Friction in Wall-Bounded Flows," Phys. Fluids 14(11), L73-L76, 2002.   DOI
8 M. Yoon, J. Ahn, J. Hwang, and H. J. Sung, "Contribution of Velocity-Vorticity Correlations to the Frictional Drag in Wall-Bounded Turbulent Flows," Phys. Fluids 28, 081702, 2016.   DOI
9 J. -S. Kim, J. Hwang, M. Yoon, J. Ahn, and H. J. Sung, "Influence of a Large-Eddy Breakup Device on the Frictional Drag in a Turbulent Boundary Layer," Phys. Fluids 29(6), 065103, 2017.   DOI
10 Y. F. Yao and N. D. Sandham, "Direct Numerical Simulation of Turbulent Trailing-Edge Flow with Base Flow Control," AIAA Journal, 40(9), 1708-1716, 2002.   DOI
11 M. -J. Kim and K. -C. Lee, "Drag Prediction of an Axisymmetric Underwater Vehicle with Bluff Afterbody using CFD," KIMST Annual Conference Proceedings, 2009.