Browse > Article
http://dx.doi.org/10.14478/ace.2017.1035

Effect of β-Resin of Petroleum-based Binder Pitch on Density of Carbon Block  

Kim, Kyung Hoon (Department of Chemical Engineering and Applied Chemistry, Chungnam National University)
Lee, Sangmin (Department of Chemical Engineering and Applied Chemistry, Chungnam National University)
An, Donghae (Department of Chemical Engineering and Applied Chemistry, Chungnam National University)
Lee, Young-Seak (Department of Chemical Engineering and Applied Chemistry, Chungnam National University)
Publication Information
Applied Chemistry for Engineering / v.28, no.4, 2017 , pp. 432-436 More about this Journal
Abstract
Carbon blocks were prepared by compression molding process using the mixture of isotropic cokes and binder pitches, which were reformed with different ${\beta}$-resin contents from pyrolysis fuel oil. Physical and chemical properties and also thermal behavior of binder pitches were investigated through elemental analysis, FT-IR and thermogravimetric analysis, respectively. The adhesion of binder pitches to isotropic coke particles was evaluated from SEM images of the fracture surface of carbon blocks. From these results, it is shown that the adhesion between the cokes and binder was enhanced by increasing the ${\beta}$-resin content of binder pitches. The density of the carbon block after carbonization also increased from 1.325 to $1.383g/cm^3$ by increasing the ${\beta}$-resin content of binder pitches from 1.4 to 20.1%.
Keywords
carbon block; binder pitch; ${\beta}$-resin; pyrolysis fuel oil;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 W. Zhang, J. T. Andersson, H. J. Rader, and K. Mullen, Molecular characterization of large polycyclic aromatic hydrocarbons in solid petroleum pitch and coal tar pitch by high resolution MALDI ToF MS and insights from ion mobility separation, Carbon, 95, 672-680 (2015).   DOI
2 K. Kanno, K. E. Yoon, J. J. Fernandez, I. Mochida, F. Fortin, and Y. Korai, Effects of carbon black addition on the carbonization of mesophase pitch, Carbon, 32, 801-807 (1994).   DOI
3 J. Fernandez, A. Figueiras, M. Granda, J. Bermejo, and R. Menendez, Modification of coal-tar pitch by air-blowing: I. Variation of pitch composition and properties, Carbon, 33, 295-307 (1995).   DOI
4 J.-Y. Jung, M.-S. Park, M. I. Kim, and Y.-S. Lee, Novel reforming of pyrolized fuel oil by electron beam radiation for pitch production, Carbon Lett., 15, 262-267 (2014).   DOI
5 Y. Yamada, Characterization of heavy oils and its application, (Part 4): Hydrodesulfurization of heavy oils, J. Jpn. Pet. Inst., 24, 71-80 (1981).   DOI
6 E. Savage, Carbon-Carbon Composites, 323-354, Chapman & Hall, London, UK (1993).
7 Y. Zhao, J. Shi, H. Wang, Z. Tao, Z. Liu, Q. Guo, and L. Liu, A sandwich structure graphite block with excellent thermal and mechanical properties reinforced by in-situ grown carbon nanotubes, Carbon, 51, 427-430 (2013).   DOI
8 I. Mochida, R. Fujiura, T. Kojima, H. Sakamoto, and T. Yoshimura, Carbon disc of high density and strength prepared from heat-treated mesophase pitch grains, Carbon, 33, 265-274 (1995).   DOI
9 S.-M. Lee, D.-S. Kang, and J.-S. Roh, Bulk graphite: materials and manufacturing process, Carbon Lett., 16, 135-146 (2015).   DOI
10 H. Honda and T. Abe, Production of binder pitch from petroleum vacuum residue (Part 1): Relations between the properties of pitch obtained and heat-treatment conditions of vacuum residue, J. Jpn. Pet. Inst., 18, 758-763 (1975).   DOI
11 J.-Y. Yang, S.-H. Park, S.-J. Park, and M.-K. Seo, Preparation and characteristic of carbon/carbon composites with coal-tar and petroleum binder pitches, Appl. Chem. Eng., 26, 406-412 (2015).   DOI
12 T. Metzinger and K. Huttinger, Investigations on the cross-linking of binder pitch matrix of carbon bodies with molecular oxygen-Part I. Chemistry of reactions between pitch and oxygen, Carbon, 35, 885-892 (1997).   DOI
13 G. Yuan, X. Li, Z. Dong, X. Xiong, B. Rand, Z. Cui, Y. Cong, J. Zhang, Y. Li, and Z. Zhang, Pitch-based ribbon-shaped carbon-fiber-reinforced one-dimensional carbon/carbon composites with ultrahigh thermal conductivity, Carbon, 68, 413-425 (2014).   DOI
14 D. R. Ball, The influence of the type of quinoline insolubles on the quality of coal tar binder pitch, Carbon, 16, 205-209 (1978).   DOI
15 M.-J. Jung, Y. Ko, and Y.-S. Lee, Synthesis of pitch from PFO, byproduct of naphtha cracking process using UV irradiation and $AlCl_3$ Catalyst, Appl. Chem. Eng., 26, 224-228 (2015).   DOI
16 R. H. Wombles and M. D. Kiser, Developing coal tar/petroleum pitches. In: A. Tomsett and J. Johnson (eds.). Essential Readings in Light Metals: Electrode Technology for Aluminum Production, Volume 4, 246-250, Springer (2016).
17 J. T. Baron, S. A. McKinney, and R. H. Wombles, Coal tar pitch-past, present, and future. In: A. Tomsett and J. Johnson (eds.). Essential Readings in Light Metals: Electrode Technology for Aluminum Production, Volume 4, 177-181, Springer (2016).
18 S.-M. Lee, D.-S. Kang, W.-S. Kim, and J.-S. Roh, Fabrication of isotropic bulk graphite using artificial graphite scrap, Carbon Lett., 15, 142-145 (2014).   DOI
19 Y.-G. Wang, Y. Korai, and I. Mochida, Carbon disc of high density and strength prepared from synthetic pitch-derived mesocarbon microbeads, Carbon, 37, 1049-1057 (1999).   DOI
20 M.-S. Park, S. Cho, E. Jeong, and Y.-S. Lee, Physico-chemical and electrochemical properties of pitch-based high crystallinity cokes used as electrode material for electric double layer capacitor, J. Ind. Eng. Chem., 23, 27-32 (2015).   DOI
21 J.-H. Kim and Y.-S. Lee, Characteristics of a high compressive strength graphite foam prepared from pitches using a PVA-AAc solution, J. Ind. Eng. Chem., 30, 127-133 (2015).   DOI
22 L. Yingquan, Z. Zhengde, D. Chaoquan, and S. Yusheng, Investigation of brazing structure of bulk graphite to a W-Re substrate, Mater. Charact., 44, 425-429 (2000).   DOI
23 S. Ko, C. W. Lee, and J. S. Im, Petrochemical-waste-derived high-performance anode material for Li-ion batteries, J. Ind. Eng. Chem., 36, 125-131 (2016).   DOI
24 F. Chevarin, K. Azari, D. Ziegler, R. Gauvin, M. Fafard, and H. Alamdari, Substrate effect of coke particles on the structure and reactivity of coke/pitch mixtures in carbon anodes, Fuel, 183, 123-131 (2016).   DOI
25 S. Hussain, A. Trzcinski, H. Asghar, H. Sattar, N. Brown, and E. Roberts, Disinfection performance of adsorption using graphite adsorbent coupled with electrochemical regeneration for various microorganisms present in water, J. Ind. Eng. Chem., 44, 216-225 (2016).   DOI
26 S.-M. Lee, D.-S. Kang, H.-S. Kim, and J.-S. Roh, Changes in the porosity of bulk graphite according to the viscosity of resin for impregnation, Carbon Lett., 16, 132-134 (2015).   DOI
27 J. Alcaniz-Monge, D. Cazorla-Amoros, A. Linares-Solano, A. Oya, A. Sakamoto, and K. Hosm, Preparation of general purpose carbon fibers from coal tar pitches with low softening point, Carbon, 35, 1079-1087 (1997).   DOI