Browse > Article
http://dx.doi.org/10.6111/JKCGCT.2010.20.2.069

Fabrication of Sm0.5Sr0.5CoO3 cathode films for intermediate temperature SOFCs by electrostatic spray deposition  

Park, In-Yu (Division of Materials Science & Engineering, Hanyang University)
Im, Jong-Mo (Division of Materials Science & Engineering, Hanyang University)
Jung, Yeong-Geul (Division of Materials Science & Engineering, Hanyang University)
Shin, Dong-Wook (Division of Materials Science & Engineering, Hanyang University)
Abstract
The microstructural change of the $Sm_{0.5}Sr_{0.5}CoO_3$ (SSC) electrode for a cathode material of solid oxdie fuel cells (SOFCs) deposited by the electrostatic spray deposition (ESD) technique was characterized. Samarium chloride hexahydrate $(SmCl_3{\cdot}6H_2O)$, strontium chloride hexahydrate $(SrCl_2{\cdot}gH_2O)$, cobalt nitrate hexahydrate $(Co(No_3)_2{\cdot}6H_2O)$ as starting materials and methyl alcohol as solvent were used to make precursor solution. The suitable porous SSC films for a cathode of SOFCs were deposited on Si substrate and it is observed that the microstructure was strongly dependent on processing parameters such as deposition time, substrate temperature, and applied voltage. Scanning Electron Microscope (SEM) and X-ray Diffractometer (XRD) measurement were used to investigate the microstructure and crystallinity of the SSC films. The ESD technique is shown to be an efficient method in which the SOFCs' cathode film can be fabricated with the desired phases and microstructure.
Keywords
SSC; SOFC; Electrostatic Spray Deposition;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Y. Liu, S. Zha and M. Liu, "Novel nanostructured electrodes for solid oxide fuel cells fabricated by combustion chemical vapor deposition (CVD)", Adv. Mater. 16 (2004) 256.   DOI   ScienceOn
2 D. Fotiadis, Y. Liang, S. Filipek and K. Palczewski, "Rayleigh jets from levitated microdroplets", Nature 421 (2003) 128.   DOI   ScienceOn
3 X. Zhang, M. Robertson and S. Yick, "$Sm_{0.5}Sr_{0.5}CoO_{3}+Sm_{0.2}Ce_{0.8}O_{1.9}$ composite cathode for cermet supported thin $Sm_{0.2}Ce_{0.8}O_{1.9}$ electrolyte SOFC operating below $600^{o}C$", J. Power Sources 160 (2006) 1211.   DOI   ScienceOn
4 J.M. Im, I.Y. Park, S.E. Jang and D.W. Shin, "Fabrication of porous lanthanum strontium manganite films by electrostatic spray deposition", Met. Mater. Int. 15 (2009) 1.   DOI   ScienceOn
5 C. Chen, E.M. Kelder and J. Schoonman, "Morphology control of thin $LiCoO_{2}$ films fabricated using the electrostatic spray deposition (ESD) technique", J. Mater. Chem. 6 (1996) 765.   DOI   ScienceOn
6 A.M. Ganan-Calvo, J. Davila and A. Barrero, "Current and droplet size in the electrospraying of liquids. Scaling laws", J. Aerosol Sci. 28 (1997) 249.   DOI   ScienceOn
7 Z. Tang, Y. Xie, H. Hawthorne and D. Ghosh, "Sol-gel processing of $Sr_{0.5}Sm_{0.5}CoO_{3}$ film", J. Power Sources 157 (2006) 385.   DOI   ScienceOn
8 S. Zha, W. Rauch and M. Liu, "$Ni-Ce_{0.9}Gd_{0.1}O_{1.95}$ anode for GDC electrolyte-based low-temperature SOFCs", Solid State Ionics. 166 (2004) 241.   DOI   ScienceOn
9 W. Wang and M. Mogensen, "High-performance lanthanum-ferrite-based cathode for SOFC", Solid State Ionics 176 (2005) 457.   DOI   ScienceOn
10 T. Ishihara and M. Honda, "Intermediate temperature solid oxide fuel cells using a new $LaGaO_{3}$ based oxide ion conductor", J. Electrochem. Soc. 145 (1998) 3177.   DOI   ScienceOn
11 R. Doshi, VL. Richards, J.D. Carter, X. Wang and M. Krumpelt, "Development of solid-oxide fuel cells that operate at $500^{o}C$", J. Electrochem. Soc. 146 (1999) 1273.   DOI   ScienceOn
12 E. Maguire, B. Gharbage, F.M.B. Marques and J.A. Labrincha, "Cathode materials for intermediate temperature SOFCs", Solid State Ionics 127 (2000) 329.   DOI   ScienceOn
13 V. Dusastre and J.A. Kilner, "Optimisation of composite cathodes for intermediate temperature SOFC applications", Solid State Ionics 126 (2000) 163.
14 C.R. Xia, W. Rauch, F.L. Chen and M.L. Liu, "$Sm_{0.5}Sr_{0.5}CoO_{3}$ cathodes for low-temperature SOFCs", Solid State Ionics 149 (2002) 11.   DOI   ScienceOn
15 S.C. Singhal, "Advances in solid oxide fuel cell", Solid State Ionics 135 (2000) 305.   DOI   ScienceOn
16 K.L. Choy, S. Charojrochkul and B.C.H. Steele, "Fabrication of cathode for solid oxide fuel cells using flame assisted vapour deposition technique", Solid State Ionics 96 (1997) 49.   DOI   ScienceOn