Browse > Article
http://dx.doi.org/10.3740/MRSK.2008.18.2.092

Effects of Preparation Conditions in the Spray Pyrolysis on the Characteristics of Ca8Mg(SiO4)4Cl2:Eu2+ Phosphor  

Han, Jin-Man (Department of Chemical Engineering, Konkuk University)
Koo, Hye-Young (Department of Chemical Engineering, Konkuk University)
Lee, Sang-Ho (Department of Chemical Engineering, Konkuk University)
Kang, Yun-Chan (Department of Chemical Engineering, Konkuk University)
Publication Information
Korean Journal of Materials Research / v.18, no.2, 2008 , pp. 92-97 More about this Journal
Abstract
In spray pyrolysis, the effects of the preparation temperature, flow rate of the carrier gas and concentration of the spray solution on characteristics such as the morphology, size, and emission intensity of $Ca_8Mg(SiO_4)_4Cl_2:Eu^{2+}$ phosphor powders under long-wavelength ultraviolet light were investigated. The phosphor powders obtained post-treatment had a range of micron sizes with regular morphologies. However, the composition, crystal structure and photoluminescence intensity of the phosphor powders were affected by the preparation conditions of the precursor powders. The $Ca_8Mg(SiO_4)_4Cl_2:Eu^{2+}$ phosphor powders prepared at temperatures that were lower and higher than $700^{\circ}C$ had low photoluminescence intensities due to deficiencies related to the of Cl component. The phosphor powders with the deficient Cl component had impurity peaks of $Ca_2SiO_4$. The optimum flow rates of the carrier gas in the preparation of the $Ca_8Mg(SiO_4)_4Cl_2:Eu^{2+}$ phosphor powders with high photoluminescence intensities and regular morphologies were between 40 and 60 l/minute. Phosphor powders prepared from a spray solution above 0.5 M had regular morphologies and high photoluminescence intensities.
Keywords
phosphor; spray pyrolysis; chlorosilicate; LED;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
Times Cited By SCOPUS : 0
연도 인용수 순위
1 H. S. Kang, S. K. Hong, H. Y. Koo, S. H. Ju, Y. C. Kang, K. Y. Jung and S. B. Park, Jpn. J. Appl. Phys., 45, 1617 (2006)   DOI
2 H. Y. Koo, S. K. Hong, J. M. Han and Y. C. Kang, J. Alloy. Compd., In press (2007)
3 X. Zhang and X. Liu, J. Electrochem. Soc., 139, 622 (1992)   DOI
4 H. Lin, X. Liu and W. Xu, J. Chin. Ceram. Soc., 25, 494 (1997)
5 Y. H. Zhou and J. Lin, J. Alloys Compd., 408-412, 856 (2006)   DOI   ScienceOn
6 N. Joffin, J. Dexpert-Ghys, M. Verelst, G. Baret and A. Garcia, J. Lumin., 113, 249 (2005)   DOI   ScienceOn
7 Y. Shimomura and N. Kijima, J. Electrochem. Soc., 151, H86 (2004)   DOI   ScienceOn
8 I. W. Lenggoro, B. Xia, H. Mizushima, K. Okuyama and N. Kijima, Mater. Lett., 50, 92 (2001)   DOI   ScienceOn
9 B. W. Jeoung, G. Y. Hong, W. T. Yoo and J. S. Yoo, J. Electrochem. Soc., 151, H213 (2004)   DOI   ScienceOn
10 H. Y. Koo, D. S. Jung, S. H. Ju, S. K. Hong and Y. C. Kang, Kor. J. Mater. Res., 16, 163 (2006)   DOI   ScienceOn
11 H. Y. Koo and Y. C. Kang, Kor. J. Mater. Res., 16, 485 (2006)   DOI   ScienceOn