Browse > Article
http://dx.doi.org/10.3740/MRSK.2005.15.1.061

A Study on the Wear Behavior of the Cu-TiB2 Composites  

Kim Jung-Nam (Department of Materials Science and Engineering, Graduate School of Industry and Engineering)
Choi Jong-Un (Department of Materials Science and Engineering, Seoul National University of Technology)
Kang Kae-Myung (Department of Materials Science and Engineering, Seoul National University of Technology)
Publication Information
Korean Journal of Materials Research / v.15, no.1, 2005 , pp. 61-65 More about this Journal
Abstract
The titanium $diboride(TiB_2)$ has high strength(750MPa), high melting point $(3225^{\circ}C)\;and\;10\%$ IACS electrical conductivity. On this account, the dispersion hardening $Cu-TiB_2$ composites(MMCs) are a promising candidate for applications as electrical contact materials. MMCs for electrical contact materials can reduce material cost and resource consumption caused by wear, due to its good mechanical and electrical property. In this study, we attempt to prepare MMCs with various volume fraction and particle size of $TiB_2$ by means of hot extruded and cold drawn process. Dry sliding wear tests were performed on a pin-on-disk type wear tester, sliding against SM45C under the different applied loads. After wear testing, the microstructures of the worn surfaces were observed by SEM and the microhardnesses of the subsurface zone were measured.
Keywords
wear; worn surface; subsurface zone;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 N. P. Suh, Wear, 25, 111 (1973)   DOI   ScienceOn
2 J. P. Tu, W. Rong, S. Y. Guo and Y. Z. Yang, Wear, 255, 832 (2003)   DOI   ScienceOn
3 K. M. Kang and S. J. Kim, Kor. J. Mater. Res., 3(1), 58 (1993)
4 A. T. Alpas, Metall., Trans., 25A, 969 (1994)
5 P. H. Shipway, A. R. kennedy and A. J. Wilkes, Wear, 216, 160 (1998)   DOI   ScienceOn
6 K. M. Kang and J. T. Song, Wear, 140, 119 (1990)   DOI   ScienceOn
7 S. I. Hong and M. A. Hill, Scripta Mater., 44, 2509 (2001)   DOI   ScienceOn
8 J. S. Song and S. I. Hong, J. Kor. lnst. Met. & Mater., 40, 1062 (2002)
9 Z. Q. Li and T. B. Chen, Materails Characterization, 49, 67 (2002)   DOI   ScienceOn
10 V. Y. Gertsman, R. Birringer, R. Z. Valiev and H. Glieter, Scripta metall. matter, 30(2), 229 (1994)   DOI
11 R. Z. Valiev, E. V. Kozlov, Yu. F. Ivanov, J. Lian, A. A. Nazarov and B. Baudelet, Acta metall. mater., 42(7), 2467 (1994)   DOI   ScienceOn
12 A. B. Lebedev, Yu. A. Burenkov, A. E. Romanov, V. I. Kopylov, V. P. Filonenko and V. G. Gryaznov, Mater. Sci. Engng. A, 203(1-2), 165. (1995)   DOI   ScienceOn
13 E. Maire, D. S. Wilkinson, J. D. Embury and R. Fougeres, Acta Mater., 45(12), 5261 (1997)   DOI   ScienceOn
14 J. Gurland, Acta Metall., 20(5), 735 (1972)   DOI   ScienceOn
15 K. M. Kang and J. U. Choi, Kor. J. Mater. Res., 14(1), 74 (2004)
16 V. Y. Gertsman, R. Birringer, R. Z. Valiev and H. Glieter, Scripta metall. matter, 30(2), 229 (1994)   DOI
17 Y. J. Kwon, M. Kobashi, T. Choh and N. Kanetake, J. Japan Inst.Metals., 65(4), 273 (2001)   DOI
18 J. S. Lee, N. J. Kim, J. Y. Jung, E. S. Lee and S. A., Scripta Materialia, 39(8), 1063 (1998)   DOI   ScienceOn
19 Q. Xu, X. Zhang, J. Han, X. He and V. L. Kvanin, Materials letters, 57, 4439 (2003)   DOI   ScienceOn
20 S. Liang, L. Fang and Z. Fan, Mater. Sci. Engng. A, 374, 27 (2004)   DOI   ScienceOn