Browse > Article
http://dx.doi.org/10.5000/EESK.2006.10.6.009

Signal Analysis from a Long-Term Bridge Monitoring System in Yongjong Bridge  

Kim, Sung-Kon (Seoul National University of Technology)
Koh, Hyun-Moo (Seoul National University)
Lee, Jung-Whee (Research Institute of Industrial Science and Technology (RIST))
Bae, In-Hwan (New Airport Hiway, Co.)
Publication Information
Journal of the Earthquake Engineering Society of Korea / v.10, no.6, 2006 , pp. 9-18 More about this Journal
Abstract
This paper presents schematically the monitoring system installed in Yongjong Bridge, a self-anchored suspension bridge located in the expressway linking Seoul and Incheon International Airport. Automatic measurement of instrumented civil engineering structures is now widely applied for behavior monitoring during construction in field as well as long-term monitoring for lifetime assessment of bridge structures. A representative example of results that can be acquired through structural health monitoring system is presented by means of data measured during a few years after the opening of the bridge. In order to effectively measure the tension force for hangers that have relatively short length or high tension force, a static tension measurement device has been explored. Newly equipped railway system on the existing bridge results in change of dead load, consequently dynamic characteristics have also been changed. This result can be detected by the monitoring system during and after railway construction.
Keywords
Yongjong Bridge; monitoring system; tension measurement; structural change;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Koh, H. M., Choo, J. F., Kim, S. and Kim, C. Y., 'Recent application and development of structural health monitoring systems and intelligent structures in Korea,' Structural Health Monitoring and Intelligent Infrastructures, Wu & Abe (eds): 2003, pp. 99-111
2 Ahn, S.S., Lee, LK., Bae, J.H. and Choi, H.K., 'Static test method for estimating tensile force of hanger cable,' Proceedings of the Annual Symposium of Korean Society of Civil Engineers, 2003, pp. 1418-1423. (in Korean)
3 Chen, S. S. and Kim, S., 'Automated signal monitoring using neural networks in a smart structural system,' J. Intelligent Material Systems and Structures, Vol. 6, 1995, pp. 508-515   DOI
4 Bae, J. H. and Ha, K. H., 'Maintenance of Cables in the 3-Dimensional Self Anchored Suspension Bridge,' KSSC Number 16-3, Sept. 2004. (in Korean)
5 Koh, H. M., Kim, S. K. and Choo, J. F., 'Recent Development of Bridge Health Monitoring Systems in Korea,' Proceedings of the North American Euro-Pacific CSHM Workshop, Nov., 2004, Hawaii
6 Kim, S., Kim, C. Y. and Lee, J., 'Monitoring Results of a Self-Anchored Suspension Bridge,' Proceedings of the North American Euro-Pacific CSHM Workshop, Nov., 2004, Hawaii
7 Yoon, J. G., Sohn, J. and Chang, S. P., 'A study on tension measurement for cable-supported bridge,' Proceedings of the Annual Symposium of Korean Society of Civil Engineers, Vol. 1, 1999, pp. 117-120. (in Korean)
8 Ahn, S. S., Kim, M. H. and Kim, I. B., 'Cable Tension Force Estimation by the Ambient Vibration Method,' Proceedings of the Annual Symposium of Korean Society of Civil Engineers, 2001, pp. 1-4. (in Korean)
9 Sohn, H., Dzwonczyk, M., Straser, E. G., Kiremidjian, A. S., Law, K. H. and Meng, T., 'An experimental study of temperature effect on modal parameters of the Alamosa Canyon Bridge', Earthquake Engineering and Structural Dynamics, Vol. 28, 1999, pp. 879-897   DOI   ScienceOn
10 Hwang, S., Temperature Effect on Structural Health Monitoring of Cable Supported Bridges, M.S. Thesis, Seoul National University, Korea, 2003
11 Ljung, L., System Identification Toolbox for use with Matlab, The mathworks, Inc., 1998
12 Zui, H., Shinke, T. and Namita, Y., 'Practical Formulas for Estimation of Cable Tension by Vibration Method,' Journal of Structural Engineering, Vol. 122, No.6, 1996, pp. 651-656   DOI   ScienceOn
13 Ahn, S. S., Lee,I. K, Park, J. H. and Lee, S-H, Proceedings of the International Symposium on Cable Dynamics, Charleston, U.S.A. 19-22 September 2005