Browse > Article

A Study on the Residual Stresses by the Hole Drilling Measuring in the WeldZone  

NamKoong, Chai-Kwan (서울산업대학교 기계설계자동화공학부)
Publication Information
Transactions of the Korean Society of Machine Tool Engineers / v.17, no.3, 2008 , pp. 115-121 More about this Journal
Abstract
A knowloedge of the residual stress distribution at circumferential welds can increase the prediction accuracy of a fracture assessment in pipe lines. In this study, in order to predict the residual stress distribution in the circumferential butt-welded pipes were measured, using the hole-drilling strain gauge method. Their practical applications were performed in to two kinds of pipes. As the results, the following characteristics were found. On the inner surface of pipes, the circumferential and axial residual stresses were both tensile near the center line of welding and both of them changed from tensile to compressive as the distance from the center line increased. On the outer surface, however, the circumferential residual stress was shown to be tensile wile the axial residual stress was compressive near the center line of welding, and later they were revered at the region far away from the centerline.
Keywords
Residual Stress; Butt-Weld; Hole-Drilling; WeldZone; Circumferential Weld;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Rendler, N. J. and Vigness, I., 1966, "Hole-drilling Strain-gage Method of Measuring Residual Stresses," Journal of Experimental Mechanics, U.S.A., pp. 577-586
2 Vaidyanathan, S., Todaro, A. F., and Finnie, I., 1973, "Residual Stresses due to Circumferential Welds," Transactions of the ASME, Journal of Engineering Materials and Technology, pp. 233-237
3 NamKoong, C. K., 2003, "An Experimental Study on Detection of Defects in Weldzone," Trans. of KSMTE, Vol. 12, No. 6, pp. 56-63
4 Rybicki, E. F. and Stonesifer, R. b., 1979, "Computation of Residual Stresses due to Multipass Welds in Piping Systems," Transactions of the ASME, Journal of Pressure Vessel Technology, Vol. 101, pp. 149-154   DOI
5 Bynum, J. E., 1981, "Modification to the Hole Drilling Technique of Measuring Residual Stresses for Improved Accuracy and Reproducibility," Journal of Experimental Mechanics, U.S.A., Vol. 21, No. 1   DOI   ScienceOn
6 Vaidyanathan, S., Weiss, H., and Finnie, I., 1973, "A Further Study of Residual Stresses in Circumferential Welds," Transactions of the ASME, Journal of Engineering Materials and Technology, pp. 238-242
7 Satoh, K., Toyoda, M., Suita, Y., Tanaka, M., and Hirano, T., 1983, "Controlling Parameters of Residual Stresses and Deformations in Welded Thin Cylindrical Shells," Transactions of the Japan Welding Society, Vol. 17, No. 1, pp. 13-19
8 Watanabe, M., Minehisa, S., and Onoe, H., 1955, "Some Experimental Studies to the Residual Stresses of the Welded Pipes," Japan Welding Society Journal, Vol. 24, No. 2-3, pp. 84-89   DOI
9 Leggatt, R. H., 1982, "Residual Stresses at Circumferential Welds in Pipes," The Welding Institute Research Bulletin, England, pp. 181-188
10 Lee, K. M., Lee, C. K, 2008, "An Effect of Harmful Materials During Welding Work," Trans. of the KSMTE, Vol. 17, No. 1, pp. 43-49   과학기술학회마을
11 Ueda, Y., Nakacho, K., Shimizu, T., and Ohkubo, K., 1983, "Residual Stresses and Their Mechanisms of Production at Circumferential Weld by Heat-sink Welding," Japan Welding Society Journal, Vol. 52, No. 2, pp. 90-96   DOI
12 Jonsson, M. and Josefson, B. L., 1988, "Experimentally Determined Transient and Residual Stresses in a Butt-Welded Pipe," Journal of Strain Analysis, England, Vol. 23, No. 1, pp. 25-31   DOI