Browse > Article

A Study on Influence of Parameters and Characteristics in the Injection Process on the Birefringence and Refractive Index for Pickup Lens  

Lee, Seung-Joon (한국산업기술대학교 지식기반기술 에너지대학원 나노광공학과)
Hyun, Dong-Hoon (한국산업기술대학교 나노광공학과)
Publication Information
Transactions of the Korean Society of Machine Tool Engineers / v.16, no.6, 2007 , pp. 21-28 More about this Journal
Abstract
Injection molding process factors such as molding temperature, injection pressure, flow rate and flow velocity, must be controlled properly in filling and packing phases in the injection molding process. In this study, effects of these factors on the injection molding were investigated through the flow analysis for birefringence and refractive index for pickup lens. This paper presents the birefringence and refractive index reduced with increasing the holding pressure and also the holding pressure time. And there are interaction with birefringence and fill time in the injection process. The optimal conditions through DOE are validated by using injection molding analysis.
Keywords
Aspheric Surface; Birefringence; Lens Injection Molding; Refractive index; Hold pressure;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Lee, Y. B., Kwon, T. H. and Yoon, K. H., 2002, 'Numerical Analysis of Residual Stresses and Birefringence in Injection/Compression molded Center-Gated Disk. Part I and Part II,' KSME (A), Vol. 26, No. 11, pp.2342-2354 & 2355-2363   DOI
2 Kang, S. D., Kim, W. S., Jang, K. H. and Kim, D. H., 2004, 'A Study on the Compensation of Ultra-precision Aspheric Lens Mold,' Proceeding of KSPE spring conference, pp. 237-238
3 Shyu, G. D., 1993, Birefringence and Residual Stresses in Molded Articles of Amorphous Polymers, Ph. D. Thesis, The University of Akron
4 Lee, S. B., 2005, Design of Experiment by Minitab, ELECTRIC INC
5 Otani, Y., Shimada, T., Yoshizawa, T. and Umeda, N., 1994, 'Two-dimensional birefringence measurement using the phase shifting technique,' Opt. Engng., Vol. 33, pp. 1604-1609   DOI   ScienceOn
6 Kim, J. S. and Yoon, K. H., 2003, 'A Study on the Prediction of Thermally-Induced Residual Stress and Birefringence in Quenched Polystyrene Plate Including Free Volume Theory,' KSME (A), Vol. 27, No. 1, pp. 77-87
7 Kim, H. P. and Kim, Y. J., 2002, 'A Study on the Effects of Filling and Packing Phases on the Injection Molding,' Proceeding of the KSMTE spring conference, pp. 112-118
8 Ha, Y. W., Jung, T. H. and Lee, B. J., 2002, 'Injection Moulding of Polyetherimide Axi-Symmetric Elements,' Transactions of the Korean Society of Machine Tool Engineers, Vol. 11, No. 6, pp. 68-74
9 Yoon, K. H., 1996, 'On The Manufacturing Process of a Optical Disk Substrate,' Polymer Science and Technology, Vol. 7, No. 3, pp. 284-290
10 Lee, H. S., Lee, H. K. and Yang, G. E., 2005, 'A Study on Injection Molding Analysis and Validation of Large Injection-Molded Body Using Design of Experiment', Proceeding of the KSMTE spring conference, pp. 109-114