Browse > Article

Effects of Cutting Conditions on Specific Cutting Force Coefficients in End Milling  

Lee Sin-Young (군산대학교 기계공학부)
Publication Information
Transactions of the Korean Society of Machine Tool Engineers / v.13, no.6, 2004 , pp. 1-9 More about this Journal
Abstract
For improvement of productivity and cutting tool lift, cutting force in end milling needs to be predicted accurately. In order to analyze cutting force, the cutting dynamics was modelled mathematically by using chip load, cutting geometry, and the relationship between cutting forces and the chip load. Specific cutting force coefficients of the cutting dynamics model were obtained by average cutting forces, tool diameter, cutting speed, fled, axial depth and radial depth of cut. The effects of the cutting conditions on the specific cutting force constants in milling were studied. The model is verified through comparisons of model predicted cutting forces with measured cutting forces obtained from machining experiments.
Keywords
End Milling; Cutting Force; Prediction; Chip Load; Depth of Cut; Machining Experiment;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Altintas, Y., and Ghan, P. K., 1992, 'In-Process Detection and Suppression of Chatter in Milling,' Int. J. MTDR., Vol. 32, No. 3, pp. 329-347
2 Smith, S., and Tlusty, J., 1993, 'Efficient Simulation Programs for Chatter in Milling,' CIRP, Vol. 42, No.1, pp. 463-466   DOI   ScienceOn
3 Choi, J. G., Kang, Y. K., and Lee, J. J., 2003, 'A Study on the Flexible Cutting Force Model in the Ball End Milling Process,' J. of KSMTE, Vol. 12, No.2, pp. 44- 52
4 Minis, I., Yanushevsky, R., and Tembo, A., 1990, 'Analysis of Linear and Nonlinear Chatter in Milling,' CIRP, Vol. 39, No.1, pp. 459-462   DOI   ScienceOn
5 Kline, W. A., DeVor, R. E., and Lindberg, J. R., 1982, 'The Prediction of Cutting Forces in End Milling with Application to Cornering Cuts,' Int. J. MTDR., Vol. 22, No. 11, pp. 7-22
6 Hong, M. S., 2002, 'A Study on the Instantaneous Shear Plane Based Cutting Force Model for End Milling,' J. of KSMTE, Vol. 11, No.4, pp. 34-43
7 Montgomery, D. C., 1976, Design and Analysis of Experiments, John Wiley & Sons
8 Tarng, Y. S., Cheng, C. I., and Kao, J. Y., 1995, 'Modeling of Three-Dimensional Numerically Controlled End Milling Operations,' Int. J. MTDR., Vol. 35, No.7, pp. 939-950