Browse > Article
http://dx.doi.org/10.7735/ksmte.2016.25.2.143

Tool Alignment and Machining Accuracy in Micro End Milling  

An, Ju Eun (Graduate School of Mechanical Engineering, Pukyong National University)
Lee, Sung Ho (Department of Steel and Machine Maintenance, Sunlin College)
Kwak, Jae Seob (Department of Mechanical Engineering, Pukyong National University)
Publication Information
Journal of the Korean Society of Manufacturing Technology Engineers / v.25, no.2, 2016 , pp. 143-148 More about this Journal
Abstract
A micro end mill is one of the precise tools used in machining ultra-precision products such as microchannel and micropatterned mold. To achieve the required precision of these products, several studies investigated the cutting force, burr formation, and burr generation mechanism of micro end mills; however, there are few studies on the alignment of micro tools, which is the foundation of machining. Hence, in this investigation, relation expressions were derived to determine the relation between the misalignment parameters and the machining accuracy. At the same time, the effect of the machining parameters was analyzed using a multiple linear regression analysis and the analysis of variance. The results indicate that the tilting angle of a micro tool has more influence on the machining accuracy than other parameters.
Keywords
Micro end mill; Tool misalignment; Machining error; Micro channel;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Choi, W. S., Kwon, S. H., Chung, S. W., Kwon, S. G., Park, J. M., Kim, J. S., Park, D. Y., Chae, Y. H., 2012, Friction Characteristics of W100XL25 Micro Ellipse Type Pattern, Journal of the KSTLE, 28: 3 136-141.
2 Vorobyev, A. Y., Guo, C., 2015, Multifunctional Surfaces Produced by Femtosecond Laser Pulses, Journal of Applied Physics, 117:3 033103-(1-5).   DOI
3 Varenberg, M., Gorb, S. N., 2009, Hexagonal Surface Micropattern for Dry and Wet Friction, Advanced Material, 21:4 483-486.   DOI
4 Choi, S. H., Hwang, S. S., Lee, H. J., 2014, Experimental Study of Interfacial Friction in NaBH4 Solution in Microchannel Dehydrogenation Reactor, Transactions of the Korean Society of Mechanical Engineers B, 38:2 139-146.   DOI
5 Kim, E., Kinney, W. H., Ovrutsky, A. R., Vo, D., Bai, X., Honda, J. R., Marx, G., Peak, E., Lindberg, L., Falkinham III, J. O., May, R. M., Chan, E. D., 2014, A Surface with a Biomimetic Micropattern Reduces Colonization of Mycobacterium Abscessus, FEMS Microbiology Letters, 360:1 17-22.   DOI
6 Guo, P., Lu, Y., Pei, P., Ehmann, K. F., 2014, Fast Generation of Micro-channels on Cylindrical Surfaces by Elliptical Vibration Texturing, Journal of Manufacturing Science and Engineering, 136:4 041008-.   DOI
7 Lai, Y., Lin, C., Wang, H., Huang, J., Zhuang, H., Sun, L., 2008, Superhydrophilic-superhydrophobic Micropattern on $TiO_2$ Nanotube Films by Photocatalytic Lithography, Electrochemistry Communications, 10:3 387-391.   DOI
8 Seo, T. I., Sohn, J. I., Lee, H. Y., 2009, A Study of Machining Error Due to Too; Deflection in Micro Endmilling, Journal of the Korean Society of Machine Tool Engineers, 18:3 294-299.
9 Zaman, M. T., Kumar, S., Rahman, M., Sreeram, S., 2006, A Three-dimensional Analytical Cutting Force Model for Micro End Milling Operation, International Journal of Machine Tools and Manufacture, 46:3/4 353-366.   DOI
10 Piquard, R., D'Acunto, A., Laheurte, P., Dudzinski, D., 2014, Micro-end Milling of NiTi Biomedical Alloys, Burr Formation and Phase Transformation, Precisions Engineering, 38:2 356-364.   DOI