Browse > Article

A Fundamental Study on Magnetic Pulse Forming with Bar Forming Coil  

Shim, Ji-Yeon (한국생산기술연구원 친환경부품소재센터)
Kang, Bong-Yong (한국생산기술연구원 친환경부품소재센터)
Park, Dong-Hwan (웰메이트(주))
Kim, Ill-Soo (목포대학교 기계공학과)
Publication Information
Journal of the Korean Society of Manufacturing Technology Engineers / v.20, no.3, 2011 , pp. 292-297 More about this Journal
Abstract
MPF(Magnetic pulse forming) process refers to the high velocity and high strain rate deformation of a low-ductility materials driven by electromagnetic forces that are generated by the rapid discharge current through forming coil. The goal of this study was to find the characteristics of dynamic behavior of workpiece and to find the main design process on MPF using bar forming coil. For these purposes, thin Al5053 sheet were used for the experiment. The measured strain data were analyzed by developed electromagnetic FE-model. The main design parameter is location of coil, electromagnetic force. In case of the bar forming coil, there exists the dead regions where the low electromagnetic force applied on the workpiece.
Keywords
Magnetic pulse forming; Forming coil; Magnetic power source; Electromagnetic force;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Shim, J. Y., Kim, I. S., Kim, I. J., and Kang, B. Y., 2009 "Development of Experiment Model Prediction of Leakage Pressure in MPW," J. of the KSMTE, Vol. 19, No. 6, pp. 652-657.
2 Kang, B. Y., Shim, J. Y., Kim, I. S., Park, D. H., Kim, I. J., and Lee, K. J., 2009, "Development of Working Coil for Magnetic Pulse Welding," Journal of the Korean Welding and Joining Society, Vol. 27, No. 4, pp. 6-12.   DOI
3 Kang, B. Y., Shim, J. Y., Kang, M. J., and Kim, I. J., 2008, "Principle and Application of Magnetic Pulse Welding," Journal of the Korean Welding and Joining Society, Vol. 26, No. 2, pp. 5-11.   DOI
4 Li, L., Chen, Y., and Lin, S., 2003, "Laser Forming Thin Aluminum Sheets," Transactions of Nonferrous Metals Society of China, Vol. 13, No. 1, pp. 161-164.
5 Kamal, M., and Daehn, G. S., 2007, "Agile Manufacturing of a Micro-embossed Case by a Two-step Electromagnetic Forming Process," Journal of Manufacturing Science and Engineering, Vol. 190, No. 1, pp. 41-50.
6 Seth, M., Vohnout, V. J., and Daehn, G. S., 2005, "Formability of Steel Sheet in High Velocity Impact," Journal of materials processing technology, Vol. 168, No. 3, pp. 390-400.   DOI   ScienceOn
7 Amit, A. T., Marina, M. A. and Daehn, G. S., 1996, "Effect of Sample Size on Ductility in Electromagnetic Ring Expansion," Scripta Materialia, Vol. 34, No. 8, pp. 1345-1350.   DOI   ScienceOn
8 Zhang, P., 2003, Joining enabled by high velocity deformation, A Thesis for a Doctorate, Ohio State University, USA.
9 ANSYS, 2010, ANSYS User's Manual Version 10.0, ANSYS Inc.
10 Oliveira, D. A., Worswick, M. J., Finn, M., and Newman, D., 2005, " Electromagnetic Forming of Aluminnum Alloy Sheet: Free-form and Cavity Fill Experiments and Model," Journal of Materials Processing Technology, Vol. 170, No. 1, pp. 350-362.   DOI   ScienceOn
11 Lee, H. M., Kang, B. S., and Kim, J., 2010, "Development of Sheet Metal Forming Apparatus Using Electromagnetic Lorentz Force" Transactions of Materials Processing, Vol. 19, No. 1, pp. 38-43.   DOI
12 Toros, S. O., and Kacar, F., 2008, "Review of Warm Forming of Aluminum-magnesium Alloys," Journal of materials processing technology, Vol. 207, No. 1, pp. 1-12.   DOI   ScienceOn
13 Lee, J. S., 1988, "Electro-magnetic forming," KSME, Vol. 28, No. 5, pp. 476-4.