Browse > Article

Hygrothermal and Impact Damage Evaluation of CFRP Hat shaped sectional members with Stacking Angle Variation  

Yang, Yong-Jun (조선대학교 첨단부품소재공학과)
Sim, Jae-Ki (조선대학교 메카트로닉스공학과)
Publication Information
Journal of the Korean Society of Manufacturing Technology Engineers / v.19, no.6, 2010 , pp. 782-789 More about this Journal
Abstract
It is important to satisfy the requirements and standards for the protections of passengers in a car accident. There are lots of studies on the crushing energy absorption of a structure member in automobiles. In this paper, we have studied to investigate collapse characteristics and moisture absorption movements of CFRP( carbon fiber reinforced plastics) structure members when CFRP laminates are under the hygrothermal environment. In particular, the absorbed energy, mean collapse load and deformation mode were analyzed for CFRP members which absorbed most of the collision energy. Also, variation of stacking angle is important to increase the energy absorption capability. The purpose of this study is to evaluate the strength reduction and moisture absorption behavior of CFRP hat shaped member. Therefore we have made a impact collapse experiment to research into the difference of absorbed energy and deformation mode between moisture absorbed specimen and non-moisture absorbed. As a result, the effect of moisture absorption and impact loads of approximately 50% reduction in strength are shown.
Keywords
CFRP; Stacking angle; Hat shaped sectional members; Hygrothermal; Moisture absorption; Imapce collapse; Absorbed energy;
Citations & Related Records
연도 인용수 순위
  • Reference
1 White, M. D.,Jones, N., and Abramowicz, W., 1999, "A theoretical analysis for the quasi-static axial crushing of top-hat and doubles-hat thin-walled sections," International Journal of Mechanical Sciences, Vol. 41, No. 99, pp. 209-233.   DOI
2 Choi, H. S., Ahn, K. J., and Nam, J. D., 1998, "Hygroscopic Behavior of Unidirectional Carbon Fiber/Epoxy Composite Laminates," Transactions of the Korean Society of Mechanical Engineers A, Vol. 22, pp. 1486-1500.
3 Sala, G., 2000, "Composite degradation due to fluid absorption," Composites Part B, Vol. 31, pp. 357-373.   DOI   ScienceOn
4 Kim, Y. N, Choi, H. S., Cha, C. S., Im, K. H., Jung, J. A., and Yang, I. Y., 2000, "Influence of Stacking Sequence Conditions on the Characteristics of Impact Collapse using CFRP Thin-Wall Structures," Transactions of the Korean Society of Mechanical Engineers A, Vol. 24, No. 12, pp. 2945-2951.
5 Ishai, O. and Shragai, 1990, "Effect Impact of Loading on Damage and Residual Compressive Strength of CFRP Laminated Beam," Composites Struct., Vol. 14, No. 4, pp. 310-337.
6 Yuichiro, A., Yamada, K., and Takashi, I., 2007, "Effect of hygrothermal condition on compression after impact strength of CFRP laminates," Composites science and technology, Vol. 68, pp. 1376-1383.
7 Karasek, M. L., Strait, L. H., Amateau, M. F., and Runt J. P., 1995, "Effect of Temperature and Moisture on the Impact Behavior of Graphite/Epoxy Composites : Part I - Impact Energy Absorption," Journal of Composites Technology & Research, Vol. 17, No. 1, pp. 3-10.   DOI   ScienceOn
8 Weitsman, Y., 1990, Moisture in Composites : Sorption and Damage, Fatigue of Composite Materials, Elsevier Science Publishers B, New York, pp. 384-429.
9 Ma, C. C. M., Huang, Y. H., and Chang, H. J., 1991, "Hygrothermal Effect on the PEEK/CF and PPS/CF under Impact Loading(I)," ANTEC, Vol. 46, pp. 2092-2096.
10 Kook, J. S., Yang, I. Y., and Adachi, T., 2000, "Characteristics of Delamination in Graphite/Epoxy Laminates under Static and Impact Loads," Key Engineering Materials, Vol. 183-187, pp. 731-736   DOI