Browse > Article

Tool Geometry Optimization and Magnetic Abrasive Polishing for Non-ferrous Material  

Kim, Sang-Oh (부경대학교 대학원)
You, Man-Hee (부경대학교 대학원)
Kwak, Jae-Seob (부경대학교 기계공학과)
Publication Information
Journal of the Korean Society of Manufacturing Technology Engineers / v.19, no.3, 2010 , pp. 313-320 More about this Journal
Abstract
The magnetic abrasive polishing (MAP) process is used to achieve the nano-meter grade polishing results on flat or complicated surface. In previous study, polishing the stainless steel plate which is a non-magneto-material was tried. To polish non-magneto-materials using the MAP process was very difficult because the process was fundamentally possible by the help of a magnetic force. Therefore, it had lower efficiency than magneto-materials such as SM45C. In this study, optimization for tool geometry of the MAP was performed to improve the magnetic force between tool and workpiece. Moreover, a permanent magnet was installed below the non-magneto-material to improve the magnetic force. And then the design of experiments was carried out to evaluate the effect of the MAP parameters on the polishing results.
Keywords
Magnetic abrasive polishing; Design of experimental method; Magnetic density flux; Magnetic force;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Kim, S. O. and Kwak, J. S., 2008, "Improvement of Magnetic Force and Experimental Verification for Magnetic Abrasive Polishing of Alurninum Alloy," Transactions of the Korean Society of Machine Tool Engineering, Vol. 17, No. 5, pp. 23-29.   과학기술학회마을
2 Singh, S. Shan, H. S., and Kumar, T., 2002, "Pararretric optimization of magnetic-field-assisted abrasive flow machining by the taguchi method," Quality and reliability engineering international, Vol. 18, pp. 273-283.   DOI   ScienceOn
3 Chang, G. W., Yan, B. H., and Hsu, R. T., 2002, "Study of Cylindrical Magnetic Abrasive Finishing using Unbonded Magnetic Abrasives," International Journal of Machine Tool & Manufacture, Vol. 42, pp. 575-583.   DOI   ScienceOn
4 Singh, D. K. and Jain, V. K., 2005, "Analysis of Surface Texture Generated by a Flexible Magnetic Abrasive Brush," WEAR, Vol. 259, pp. 1254-1261.   DOI   ScienceOn
5 Shimura, T. and Aizawa T., 1988, "Development of Plane Magnetic Abrasive Finishing Apparatus and its Finishing Performance (2nd Report, Finishing Apparatus Using a Stationary Type Electro-magnet)," Journal of Japan Society of Precision Engineering, Vol. 54, No. 5, pp. 928-933.   DOI
6 Shaohui, Y. and Takeo, S., 2004, "A Comparative Study: Polishing Characteristics and its Mechanisms of Three Vibration Modes in Vibration-assisted Magnetic Abrasive Polishing," International Journal of Machine Tools & Manufacture, Vol. 44, pp. 383-390.   DOI   ScienceOn
7 Ko, S. L., Baron, Yu M., and Park, J. I., 2007, "Micro Deburring for Precision Parts Using Magnetic Abrasive Finishing Method," Journal of Materials Processing Technology, Vol. 187-188, pp. 19-25.   DOI   ScienceOn