Browse > Article
http://dx.doi.org/10.6106/KJCEM.2013.14.2.022

A Study for Derivation of Participant's Information Flow At Framework Construction based on BIM  

Kim, Yong-Hwa (한양대학교 일반대학원 건축환경공학과)
Lee, Ju-Sung (한양대학교 일반대학원 건축환경공학과)
Oh, Jung-Keun (건국대학교 건축공학과)
Kim, Jae-Jun (한양대학교 건축공학과)
Publication Information
Korean Journal of Construction Engineering and Management / v.14, no.2, 2013 , pp. 22-34 More about this Journal
Abstract
As construction project has been becoming larger, specialized and complicated, it is important to utilize a lot of information that is made by diverse participants. Especially this information is mainly produced in construction site that plays a leading role in construction project. The problem of information exchange between participants of construction site causes decline of construction productivity. So as to resolve this problem, there is a many interest in BIM(Building Information Modeling) that makes and manages a necessary data during building life cycle. But in Korea construction industry, applying BIM in construction phase is less active than in design phase. Through studying previous research, this study classify the main cause of failure related to information exchange in framework construction. And by interviewing expert, it draw a work that is possible to apply BIM. Next through analyzing framework construction site that is applied with BIM, this study proposes specific information flow model for supporting work by BIM.
Keywords
BIM; Information Flow; Framework;
Citations & Related Records
Times Cited By KSCI : 7  (Citation Analysis)
연도 인용수 순위
1 권오철.조찬원 (2011), "국내외 BIM가이드 분석을 통한 BIM 품질관리기준의 제안." 한국건축시공학회 논문집, 제11권 제3호, pp.265-275.   과학기술학회마을   DOI   ScienceOn
2 김경훈.김경환.이윤선.김재준 (2008), "철근콘크리트 공사의 리스크 요인이 공사비 상승 및 공기 지연에 미치는 영향에 관한 연구." 대한건축학회 논문집, 제24권 제5호, pp.165-172.   과학기술학회마을
3 김화성 (2010), "국내 시공분야의 BIM 활용사례를 통한 문제점과 향후전망." 대한건축학회지, 제54권 제1호, pp. 65-69.
4 박찬식.박희택 (2010), "시공성 분석업무 개선을 위한 BIM 기술의 적용방안." 한국건설관리학회 논문집, 제11권 제2호, 한국건설관리학회, pp.137-146.   과학기술학회마을   DOI   ScienceOn
5 오치돈.박찬식 (2012), "FMEA 기법을 활용한 공동주택 공조 공사의 건설실패 핵심관리요인 분석." 한국건설관리학회 논문집, 제13권 제3호, 한국건설관리학회, pp.78-88.
6 윤석헌 (2011), "BIM을 이용한 4D 시공시뮬레이션 현황." 한국건축시공학회 논문집, 제11권 제2호, pp.16-25.
7 이강.김준하.이진국 (2010), BIM HANDBOOK, 3판, 시공문화사, 서울, pp.28-44.
8 이경섭.서상욱(2010)." 사례분석을 통한 공동주택 골조공사의 원가절감 체크리스트 개발에 관한 연구." 한국건설관리학회논문집, 제11권 제6호, 한국건설관리학회, pp.65-77.   과학기술학회마을   DOI   ScienceOn
9 이승일.권남하.조영상 (2010), "BIM기반 골조공사의 시공성 분석 업무 적용사례에 관한 연구." 한국건축시공학회 논문집, 제10권 제5호, pp.45-54.
10 신태홍 (2011), "시공사 BIM 추진 전략에 대한 제언", 한국건축시공학회지, 제11권 제2호, pp.26-32.
11 장세준.윤석헌.윤준선.백준홍 (2007), "현장 Mock-up의 BIM 기반 시뮬레이션 기법 적용성 분석 연구", 대한건축학회지, 제23권 제10호, pp.131-138.   과학기술학회마을
12 정광량(2010), "BIM 설계사례를 통해 본 문제점과 해결책", 한국건축시공학회지, 제10권 제3호, pp. 18-22.
13 조태제.최종수(2011), "사례분석을 통한 아파트 골조공사의 공기 지연 요인 도출 및 개선방안." 한국건축시공학회 논문집, 제11권 제1호, pp.9-17.
14 전영웅.이명식 (2010), "BIM기반 건설현장 관리모델 개발에 관한 연구." 한국건축시공학회 논문집, 제10권 제1호, pp.127-135.   과학기술학회마을   DOI   ScienceOn
15 Department of Veterans Affairs (2010). "The VA BIM Guide", USA, pp.4-45
16 Barlish, K and Sullivan, K (2012). "How to measure the benefits of BIM – A case study approach." Automation in Construction, 24, pp.149-159.   DOI   ScienceOn
17 Bips (2007). "3D Working Method 2006", Denmark, pp.9-45
18 Campbell, D. A. (2006). "Modeling Rules", Architecture Week, (2012.08.02.)
19 GSA(2006). "GSA BIM Guide Series 01", USA, pp.6-22
20 John A. Kuprenas and Chris S. Mock "Collaborative BIM Modeling Case Study-Process And Results", Computing in civil engineering, 1, pp.431-441
21 NIBS (2007). "National BIM Standard", USA, pp.7-25
22 Pennstate University (2009). "BIM Execution Planning Guide Ver1.0", USA, pp.48-94
23 SENATE (2007). "BIM Requirements 2007 Volume 1: General Part", Finland, pp.5-33
24 T. Olofsson and G. Lee and C. Eastman (2007). "Benefits and lessons learned of implementing building virtual design and construction(VDC) technologies for coordination of mechanical, electrical, and plumbing(MEP) systems on a large healthcare project", ITcon, 13, pp.324-342.