Browse > Article
http://dx.doi.org/10.1007/s13296-018-0164-1

Effect of Wave Load on the Member Force of Steel Structure of Floating Buildings  

Lee, Young-Wook (Department of Architecture and Building Engineering, Kunsan National University)
Park, Tae-Jun (Structural Engineer Part, DDB, Inc)
Publication Information
International journal of steel structures / v.18, no.4, 2018 , pp. 1431-1439 More about this Journal
Abstract
For floating buildings may fl oat on the water for a long time, they are constantly affected by various environmental loads such as wind and wave loads. In this study to find the wave effect on the floating building, five models are designed using steel moment resisting frame. It is assumed that the lower part of the floating building is a reinforced concrete pontoon, while the upper part is a three-story steel frame. To analyze floating buildings affected by wind and wave loads, hydro-dynamic and substructure analysis are performed. As input loads, this study set limits that the mean wind velocity is 35 m/s and the significant wave height is 0.5 m for the residential building. From the hydrodynamic analysis, the time-history acceleration of building is obtained and transformed into a base ground input for a substructure analysis of the superstructure of the building. Finally the mean of the maximum from 30 dynamic analysis of the floating buildings are used to be compared with the results of the same model on the ground. It was shown that the dynamic results with wind and wave loads are not always lesser than the static results which are calculated with static equivalent wind load for a building that is located on the ground.
Keywords
Floating building; Steel moment resisting frame; Wind and wave load; Acceleration; Member force;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Standard, Korean Building Code and Commentary, Architectural Institute of Korea. (2016).
2 Suzuki, H., et al. (2006). ISSC Committee VI. 2: Very large floating structures. In: Sixteenth international ship and off shore structures congress, Southampton, UK (pp. 394-442).
3 Wang, C. M., Watanabe, E., & Utsunomiya, T. (Eds.). (2007). Very large floating structures. Boca Raton: CRC Press.
4 Standard, DNV-RP-C205. (2010). Environmental conditions and environmental loads. Norway: DetNorskeVeritas.
5 Lee, Y., & Park, T. (2016). Characteristics of time history response of floating building according to sampling number of wind and wave load. Journal of the Architectural Institute of Korea, 18(1), 201-208.
6 AQWA drift manual. Century Dynamics Limited, 2006.
7 Bretschneider, C. L. (1965). Generation of waves by wind. State of the art. Washington: National Engineering Science Co.
8 Chae, J. (2016). Experimental study to predict the behavior of structural frame on the floating pontoon. Ph.D. Thesis, Kunsan National University.
9 Hong, S. (2007). Design manual for very large floating structures. Seoul: Korea Ocean Research & Development Institute. (in Korean).
10 Lee, Y., & Park, T. (2014). Wind effects on the rolling and sway of floating building. Journal of the Regional Association of Architectural Institute of Korea, 16(2), 91-98.
11 Standard, American Society of Civil Engineers. (2010). Minimum design loads for buildings and other structures. ASCE/SEI 7-10.