Browse > Article
http://dx.doi.org/10.9712/KASS.2019.19.4.85

Institutional Improvement of Construction-Related Laws for Practical Application of 3D Printing  

Lee, Sung-Min (Korea Construction Quality Research Center)
Park, Sang-Hoon (Korea Construction Quality Research Center)
Publication Information
Journal of Korean Association for Spatial Structures / v.19, no.4, 2019 , pp. 85-94 More about this Journal
Abstract
Then 3D printing is used practically at construction sites, there is a serious lack of studies on the conflict with construction-related laws and expected operational problems. Accordingly, the purpose of this study is to present obstacles and directions for improvement in construction-related laws (Building Act, Construction Technology Promotion Act, Housing Act, Construction Machinery Management Act, etc.) for practical operation of 3D printing. The important results are as follows. Amending existing construction-related laws for 3D printing is irrational and inefficient in terms of structure and material. This study proposed a method of satisfying performance required by laws or standards based on the performance design method presented in existing laws and systems through structure and material performance certification procedure. In addition, inclusion of 3D printing equipment in the Construction Machinery Management Act results in various restrictions such as equipment inspection and certification of machine parts. As such restrictions can block vitalization of 3D printing, a long-term and step-wise approach was suggested.
Keywords
3D printing; Construction-related laws; Legal system policy; Suggestion of alternative;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Sepp, P. -M. (2015). Copyright Regulation of 3D printing (Master's thesis). Tallinn University of Technology
2 National Board of Trade. (2016). Trade Regulation in a 3D Printed World - a Primer (Report No. Kommerskollegium 2016:1). Sweden. Retrieved from https://www.kommers.se/Documents/dokumentarkiv/publikationer/2016/Publ-Trade-Regulation-in-a-3D-Printed-World.pdf
3 Wu, P., Wang, J., & Wang, X., "A critical review of the use of 3-D printing in the construction industry", Automation in Construction, Vol.68, p.21-31, 2016   DOI
4 Jeon, K. H., Park, M. B., Kang, M. K., & Kim, J. H., "A Study on the Development of an Automated Freeform Fabrication System and Construction Materials", Journal of the Korean Society of Civil Engineers, Vol.33, No.4, pp.1665-1673, 2013   DOI
5 Jeong, W. S., Park, S. H., & Lee, S. K. (2014). Research for Protecting Intellectual Property Right of 3D printing contents and Improving its Regulations (Report No. 14-진흥-005). Republic of Korea: Ministry of Science and ICT. Retrieved from http://www.ndsl.kr/ndsl/commons/util/ndslOriginalView.do?dbt=TRKO&cn=TRKO201500006245&rn=&url=&pageCode=PG18
6 Vogel, B. J., (2014, December 3). The Other IP Trade Secret Law and 3D Printing. 3DInsider, Retrieved from https://www.robinskaplan.com/resources/publications/2014/12/the-other-ip-trade-secret-law-and-3d-printing
7 Mendise, D., Secchi, D., & Reeves, P. (2015). A Legal and Empirical Study into the Intellectual Property Implications of 3D Printing: Executive Summary. UK: The Intellectual Property Office. Retrieved from http://eprints.bournemouth.ac.uk/21874/1/A_Legal_and_Empirical_Study_into_the_Intellectual_Property_Implications_of_3D_Printing_-_Exec_Summary_-_Web.pdf
8 Building Act, Ministry of Government Legislation, 2019.
9 Construction Technology Promotion Act, Ministry of Government Legislation, 2019.
10 Housing Act, Ministry of Government Legislation, 2019.
11 Construction Machinery Management Act, Ministry of Government Legislation, 2019.
12 Gouge, E. (2017, January 09). France dose not currently need the new 3D printing laws that parliament is considering, say experts. Pinsent Masons, Retrieved from https://www.out-law.com/en/articles/2017/january/france-does-not-currently-need-the-new-3d-printing-laws-that-parliament-is-considering-say-experts/
13 Conseil superieur de la propriete litteraire et artistique. (2016). L'IMPRESSION 3D ET LE DROIT D'AUTEUR : DES MENACES A PREVENIR, DES OPPORTUNITES A SAISIR. France. Retrieved from http://www.clubimpression3d.fr/limpression-3d-et-le-droit-dauteur-rapport/
14 Ghilassene, F. (2016). L'impression 3D et la question de la redevance pour copie privee. France: Instituto Nacional da Propriedade Industrial. Retrieved from https://www.inpi.fr/sites/default/files/impression_3d_redevance_pour_copie_privee_0.pdf