Browse > Article
http://dx.doi.org/10.9712/KASS.2016.16.2.079

Lateral-resisting Structural Systems for Tall Modular Buildings  

Lee, Chang-Hwan (DongYang Structural Engineers Co., Ltd.)
Chung, Kwang-Ryang (DongYang Structural Engineers Co., Ltd.)
Publication Information
Journal of Korean Association for Spatial Structures / v.16, no.2, 2016 , pp. 79-88 More about this Journal
Abstract
Modular buildings are constructed by assembling modular units which are prefabricated in a factory and delivered to the site. However, due to a problem of noise between floors, concrete slab is usually poured at the top or bottom level of a modular unit in Korea. This greatly increases the weight of buildings, but designing vertical members of modular units to resist overall gravity loads is very inefficient. In this study, considering domestic building construction practices, feasible structural systems for tall modular buildings are proposed in which separate steel frames and reinforced concrete core walls are designed to resist gravity and lateral loads. To verify performance, a three-dimensional structural analysis has been performed with two types of prototype buildings, i.e., a residential building and a hotel. From the results, wind-induced lateral displacements and seismic story drifts are examined and compared with their limit values. Between the two kinds of buildings, the efficiency of the proposed system is also evaluated through a comparison of the weight of structural components. Finally, the effect of a floor diaphragm on the overall behavior is analyzed and discussed.
Keywords
Modular building; Structural system; Lateral force; Story drift; Floor diaphragm;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 D.H. Lee, J.H. Ock, "A study on the applicati on of the in-fill construction method to high-rise unit modular buildings", Journal of the Architectural Institute of Korea - Structure & Construction, Vol.30, No.3, 2014, pp.105-114   DOI
2 K.T. Kim, Y.H. Lee, "Economic feasibility study on the unit modular fabrication method according to the life cycle costing methodology", Journal of the Architectural Institute of Korea - Structure & Construction, Vol.27, No.12, 2011, pp.207-214
3 R.M. Lawson, R.G. Ogden, R. Bergin, "Application of modular construction in high-rise buildings", Journal of Architectural Engineering (ASCE), Vol.18, No.2, 2012, pp.148-154   DOI
4 T.H. Ha, J.H. Lee, S.G. Hong, "Lateral force resistant capacity of light gauge steel modular building system with sheathing panels", Journal of the Architectural Institute of Korea - Structure & Construction, Vol.29, No.9, 2013, pp. 3-12   DOI
5 R.M. Lawson, J. Richards, "Modular design for high-rise buildings", Proceedings of the Institution of Civil Engineers - Structures and Buildings, Vol.163, No.3, 2010, pp.151-164   DOI
6 S. Mills, D. Grove, M. Egan, "Breaking the pre-fabricated ceiling: Challenging the limits for modular high-rise", Proceedings of CTBUH 2015 International Conference, New York, USA, 2015, pp.416-425
7 D. Farnsworth, "Modular tall building design at Atlantic Yards B2", Proceedings of CTBUH 2014 International Conference, Shanghai, China, 2014, pp.492-499
8 P. Gardiner, "The construction of a high-rise development using volumetric modular methodology", Proceedings of CTBUH 2015 International Conference, New York, USA, 2015, pp. 434-441
9 Y.M. Kim, C.K Kim, "A study on the alternative evaluation of the high-rise building structural system", Journal of the Computational Structural Engineering Institute of Korea, Vol.23, No.4, 2010, pp.425-434
10 MIDAS IT, "Midas Gen on-line manual: general structure design system", MIDAS Information Technology, Seongnam, Korea, 2015
11 Architectural Institute of Korea (AIK), Korean Building Code (KBC), AIK, Seoul, Korea, 2009
12 National Research Council of Canada (NRCC), National Building Code of Canada (NBCC), NRCC, Ottawa, Canada, 2010