1 |
Flynn, E.B. and Todd, M.D. (2010a), "A Bayesian approach to optimal sensor placement for structural health monitoring with application to active sensing", Mech. Syst. Signal Process., 24(4), 891-903. https://doi.org/10.1016/j.ymssp.2009.09.003
DOI
|
2 |
Sharif-Khodaei, Z. and Aliabadi, M.H. (2014), "Assessment of delay-and-sum algorithms for damage detection in aluminium and composite plates", Smart Mater. Struct., 23, 075007. https://doi.org/10.1088/0964-1726/23/7/075007
DOI
|
3 |
Salmanpour, M., Sharif Khodaei, Z. and Aliabadi, M.H. (2016), "Transducer placement optimisation scheme for a delay and sum damage detection algorithm", Struct. Control Health Monitor., 24(4), 1-20. https://doi.org/10.1002/stc.1898
DOI
|
4 |
Shbat, M.S. and Tuzlukov, V. (2013), "Spectrum sensing under correlated antenna array using generalized detector in cognitive radio systems", Int. J. Antennas Propag., 2013, 1-8. https://doi.org/10.1155/2013/853746
DOI
|
5 |
Sun, H. and Buyukozturk, O. (2015), "Optimal sensor placement in structural health monitoring using discrete optimization", Smart Mater. Struct., 24(12), 1-16. https://doi.org/10.1088/0964-1726/24/12/125034
DOI
|
6 |
Thiene, M., Sharif Khodaei, Z. and Aliabadi, M.H. (2016), "Optimal sensor placement for maximum area coverage (MAC) for damage localization in composite structures", Smart Mater. Struct., 25(9), 1-21. https://doi.org/10.1088/0964-1726/25/9/095037
DOI
|
7 |
Vanli, O.A., Zhang, C., Nguyen, A. and Wang, B. (2012), "A minimax sensor placement approach for damage detection in composite structures", J. Intel. Mater. Syst. Struct., 23(8), 919-932. https://doi.org/10.1177/1045389X12440751
DOI
|
8 |
Venkat, R.S., Boller, C., Ravi, N., Chakraborty, N., Kamalakar, G.S., Ukirde, K. and Mahapatra, D.R. (2015), "Optimized actuator/ sensor combinations for structural health monitoring: simulation and experimental validation", In: International Workshop on Structural Health Monitoring, Stanford, CA, USA, September.
|
9 |
Yang, C. (2018), "Sensor placement for structural health monitoring using hybrid optimization algorithm based on sensor distribution index and FE grids", Struct. Control Health Monitor., 25(6), 1-19. https://doi.org/10.1002/stc.2160
DOI
|
10 |
Yi, T.H., Li, H.N. and Zhang, X.D. (2012a), "A modified monkey algorithm for optimal sensor placement in structural health monitoring", Smart Mater. Struct., 21(10), 1-9. https://doi:10.1088/0964-1726/21/10/105033
DOI
|
11 |
Yi, T.H., Li, H.N. and Zhang, X.D. (2012b), "Sensor placement on Canton Tower for health monitoring using asynchronous-climb monkey algorithm", Smart Mater. Struct., 21(12), 1-9. https://doi.org/10.1088/0964-1726/21/12/125023
DOI
|
12 |
Yi, T.H., Li, H.N. and Wang, C.W. (2016), "Multiaxial sensor placement optimization in structural health monitoring using distributed wolf algorithm", Struct. Control Health Monitor., 23(4), 719-734. https://doi.org/10.1002/stc.1806
DOI
|
13 |
Zhou, G.D., Yi, T.H. and Li, H.N. (2014), "Sensor placement optimization in structural health monitoring using cluster-in-cluster firefly algorithm", Adv. Struct. Eng., 17(8), 1103-1115. https://doi.org/10.1260/1369-4332.17.8.1103
DOI
|
14 |
Adams, D.E. (2007), Health Monitoring of Structural Materials and Components, John Wiley & Sons Ltd, The Atrium, Southern Gate, Chichester, West Sussex PO19 8SQ, England.
|
15 |
Alem, B., Abedian, A. and Nasrollahi-Nasab, K. (2016), "Reference-free damage identification in plate-like structures using Lamb-wave propagation with embedded piezoelectric sensors", J. Aerosp. Eng., 29(6), 04016062. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000646
DOI
|
16 |
Azarbayejani, M., El-Osery, A.I., Choi, K.K. and Taha, M.R. (2008), "A probabilistic approach for optimal sensor allocation in structural health monitoring", Smart Mater. Struct., 17(5), 1-11. https://doi.org/10.1088/0964-1726/17/5/055019
DOI
|
17 |
Bagheri, A., Li, K. and Rizzo, P. (2013), "Reference-free damage detection by means of wavelet transform and empirical mode decomposition applied to Lamb waves", J. Intell. Mater. Syst. Struct., 24(2), 194-208. https://doi.org/10.1177/1045389X12460433
DOI
|
18 |
Liu, W., Gao, W.C., Sun, Y. and Xu, M.J. (2008), "Optimal sensor placement for spatial lattice structure based on genetic algorithms", J. Sound Vib., 317(1), 175-189. https://doi.org/10.1016/j.jsv.2008.03.026
DOI
|
19 |
Liu, X., Zhou, C. and Jiang, Z. (2012), "Damage localization in plate-like structure using built-in PZT sensor network", Smart Struct. Syst., Int. J., 9(1) 21-33. https://doi.org/10.12989/sss.2012.9.1.021
DOI
|
20 |
Mallardo, V., Aliabadi, M.H. and Sharif Khodaei, Z. (2012), "Optimal sensor positioning for impact localization in smart composite panels", J. Intell. Mater. Syst. Struct., 24(5), 559-573. https://doi.org/10.1177/1045389X12464280
DOI
|
21 |
Michaels, J.E. and Michaels, T.E. (2007), "Guided wave signal processing and image fusion for in situ damage localization in plates", Wave Motion, 44(6), 482-492. https://doi.org/10.1016/j.wavemoti.2007.02.008
DOI
|
22 |
Tarhini, H., Itani, R. Fakih, M.A. and Mustapha, S. (2018), "Optimization of piezoelectric wafer placement for structural health-monitoring applications", J. Intell. Mater. Syst. Struct., 29(19), 1-16. https://doi.org/10.1177/1045389X18799204
DOI
|
23 |
Michaels, J.E., Hall, J.S. and Michaels, T.E. (2009), "Adaptive imaging of damage from changes in guided wave signals recorded from spatially distributed arrays", Proceedings of Health Monitoring of Structural and Biological Systems, Volume 7295, San Diego, CA, USA, March. https://doi.org/10.1117/12.815849
DOI
|
24 |
Gao, H. and Rose, J.L. (2006), "Ultrasonic sensor placement optimization in structural health monitoring using evolutionary strategy", AIP Conference Proceedings, 820(1), 1687-1693. https://doi.org/10.1063/1.2184724
DOI
|
25 |
Berger, J.O. (1980), Statistical Decision theory and Bayesian Analysis, Springer-Verlag, New York, USA.
|
26 |
Coelho, C.K., Kim, S.B. and Chattopadhyay, A. (2011), "Optimal sensor placement for active guided wave interrogation of complex metallic components", Proceedings of Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, Volume 7981, San Diego, CA, USA, March. https://doi.org/10.1117/12.880288
DOI
|
27 |
Das, S., Chattopadhyay, A. and Zhou, X. (2009), "Acoustic based structural health monitoring for composites using optimal sensor placement: analysis and experiments", J. Reinf. Plastics Compos., 28(1), 83-97. https://doi.org/10.1177/0731684407084099
DOI
|
28 |
Diligent, O., Grahn, T., Bostrom, A., Cawley, P. and Lowe, M.J.S. (2002), "The low-frequency reflection and scattering of the S0 Lamb mode from a circular through-thickness hole in a plate: Finite Element, analytical and experimental studies", J. Acoust. Soc. Am., 112(6), 2589-2601. https://doi.org/10.1121/1.1512292
DOI
|
29 |
Ewald, V., Groves, R.M. and Benedictus, R. (2018), "Transducer placement option of lamb wave SHM system for hotspot damage monitoring", Aerospace, 5(2), 1-17. https://doi.org/10.3390/aerospace5020039
DOI
|
30 |
Farrar, C.R. and Worden, K. (2013), Structural health monitoring: a machine learning perspective, John Wiley & Sons Ltd., The Atrium, Southern Gate, Chichester, West Sussex PO19 8SQ, England.
|
31 |
Gopalakrishnan, S., Ruzzene, M. and Hanagud, S. (2011), Computational Techniques for Structural Health Monitoring, Springer-Verlag London Limited, London, England.
|
32 |
Grahn, T. (2003), "Lamb wave scattering from a circular partly through-thickness hole in a plate", Wave Motion, 37(1), 63-80. https://doi.org/10.1016/S0165-2125(02)00051-3
DOI
|
33 |
Flynn, E.B. and Todd, M.D. (2010b), "Optimal Placement of Piezoelectric Actuators and Sensors for Detecting Damage in Plate Structures", J. Intell. Mater. Syst. Struct., 21(3), 265-274. https://doi.org/10.1177/1045389X09338080
DOI
|
34 |
Hall, J.S., Fromme, P. and Michaels, J.E. (2014), "Guided wave damage characterization via minimum variance imaging with a distributed array of ultrasonic sensors", J. Nondestruct. Eval., 33(3), 299-308. https://doi.org/10.1007/s10921-013-0212-x
DOI
|
35 |
Guo, H.Y., Zhang, L., Zhang, L.L. and Zhou, J.X. (2004), "Optimal placement of sensors for structural health monitoring using improved genetic algorithms", Smart Mater. Struct., 13(3), 528-534. https://doi.org/10.1088/0964-1726/13/3/011
DOI
|
36 |
Kammer, D.C. (1991), "Sensor placement for on-orbit modal identification and correlation of large space structures", J. Guid. Control Dyn., 14(2), 251-259. https://doi.org/10.2514/3.20635
DOI
|
37 |
Kay, S.M. (1998), Fundamentals of Statistical Signal Processing, Volume 2: Detection Theory, Prentice-Hall and PTR, NJ, USA.
|
38 |
Kim, S., Lee, J., Wang, H. and Hong, D. (2009), "Sensing performance of energy detector with correlated multiple antennas", IEEE Signal Process. Lett., 16(8), 671-674. https://doi.org/10.1109/LSP.2009.2021381
DOI
|
39 |
Lee, B.C. and Staszewski, W.J. (2007), "Sensor location studies for damage detection with Lamb waves", Smart Mater. Struct., 16(2), 399-408. https://doi.org/10.1088/0964-1726/16/2/019
DOI
|
40 |
Liu, F. (2007), "A general framework for spatial correlation modeling in VLSI design", Proceedings of the 44th Annual Design Automation Conference, San Diego, CA, USA, June.
|