Browse > Article
http://dx.doi.org/10.12989/smm.2018.5.1.039

The compression-shear properties of small-size seismic isolation rubber bearings for bridges  

Wu, Yi-feng (School of Civil and Transportation Engineering, Beijing University of Civil Engineering and Architecture)
Wang, Hao (School of Civil Engineering, Southeast University)
Sha, Ben (School of Civil Engineering, Southeast University)
Zhang, Rui-jun (School of Civil Engineering, Southeast University)
Li, Ai-qun (Beijing Advanced Innovation Center for Future Urban Design, Beijing University of Civil Engineering and Architecture)
Publication Information
Structural Monitoring and Maintenance / v.5, no.1, 2018 , pp. 39-50 More about this Journal
Abstract
Taking three types of bridge bearings with diameter being 100 mm as examples, the theoretical analysis, the experimental research as well as the numerical simulation of these bearings is conducted. Since the normal compression and shear machines cannot be applied to the small-size bearings, an improved equipment to test the properties of these bearings is proposed and fabricated. Besides, the simulation of the bearings is conducted based on the explicit finite element software ANSYS/LS-DYNA, and some parameters of the bearings are modified in the finite element model to reduce the computation cost effectively. Results show that all the research methods are capable of revealing the fundamental properties of the small-size bearings, and a combined use of these methods can better catch both the integral properties and the inner detailed mechanical behaviors of the bearings.
Keywords
small-size; compression-shear; ANSYS/LS-DYNA; explicit algorithm; contact analysis;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Abe, M., Yoshida, J. and Fujino, Y. (2004), "Multi-axial behaviors of laminated rubber bearings and their modeling. I: Experimental study", J. Struct. Eng., 130(8), 1119-1132.   DOI
2 Ali, H-E. M. and Abdel-Ghaffar, A.M. (1995), "Modeling of rubber and lead passive-control bearings for seismic analysis", J. Struct. Eng., 121(7), 1134-1144.   DOI
3 Constantinou, M.C., Caccese, J. and Hawis, H.G. (1987), "Frictional characteristics of Teflon-steel interfaces under dynamic conditions", Earthq. Eng. Struct. D., 15(6), 751-759.   DOI
4 Han, X. and Warn, G.P. (2014), "Mechanistic model for simulating critical behavior in elastomeric bearings", J. Struct. Eng., 141(5), 04014140.
5 Haringx, J.A. (1950), On highly compressible helical springs and rubber rods, and their application for vibration-free mountings. Philips Research Laboratories, Eindhoven, Netherlands.
6 Hwang, J.S., Chiou, J.M. and Sheng, L.H. (1996), "A refined model for base-isolated bridges with bi-linear hysteretic bearing", Earthq. Spectra, 12(2), 245-273.   DOI
7 Kelly, J.M. and Eidinger, J.M. (1978), Experimental results of an earthquake isolation system using natural rubber bearings, Reports No. UCB/EERC78/03, California, USA.
8 Liu, W.G. and Zhou, F.L. (1999), "Research on fundamental mechanic characteristics of lead rubber bearings", Earthq. Eng. Eng. Vib., 19(1), 93-99.
9 MCJ (Ministry of Construction of Japan) (1994), Manual for Menshin design of highway bridges. Earthquake Engineering Research Center, University of California, USA.
10 Mori, A., Moss, P.J., Cooke, N., et al. (1999), "The behavior of bearings used for seismic isolation under shear and axial load", Earthq. Spectra, 15(2), 199-224.   DOI
11 Nie, S.F. (2010), "Research of mechanical properties and application of LRB in continuous beam bridge". Huazhong University of Science and Technology, Wuhan, China.
12 SAC (Standardization Administration of the People's Republic of China) (2006), Rubber Bearings-Part II: Elastomeric Seismic-Protection Isolators for Bridges, Standards Press of China, Beijing, China.
13 Takayama, M., Tada, H. and Tanaka, R. (1994), "Finite element analysis of laminated rubber bearings used in base-isolation system", Rubber Chem. Technol., 65(1), 46-62.   DOI
14 Tyler, R.G. and Robinson, W.H. (1984), "High-strain tests on lead-rubber bearings for earthquake loadings", Bull. New Zealand National Soc. Earthq. Eng., 17(2), 90-105.
15 Wang, R.Z., Chen, S.K., Liu, K.Y., et al. (2014), "Analytical simulations of the steel-laminated elastomeric bridge bearing", J. Mech., 30(4), 373-382.   DOI
16 Warn, G.P., Whittaker, A.S. and Constantinou, M.C. (2007), "Vertical stiffness of elastomeric and lead-rubber seismic isolation bearings", J. Struct. Eng., 133(9), 1227-1236.   DOI
17 Wei, B., Wang, P., He, X.H., et al. (2017), "Effects of friction variability on a rolling-damper-spring isolation system", Earthq. Struct., 13(6), 551-559.   DOI
18 Yoshida, J., Abe, M., Fujino, Y., et al. (2004), "Three-dimensional finite-element analysis of high damping rubber bearings", J. Eng. Mech., 130(5), 607-620.   DOI
19 Wei, B., Zuo, C.J., He, X.H., et al. (2018), "Numerical investigation on scaling a pure friction isolation system for civil structures in shaking table model tests", Int. J. Nonlinear Mech., 98, 1-12.   DOI
20 Wu, Y.F., Wang, H., Li, A.Q., et al. (2017), "Explicit finite element analysis and experimental verification of a sliding lead rubber bearing", J. Zhejiang University-SCIENCE A, 18(5), 363-376.   DOI
21 Zhang, J.P., Zhou, F.L. and Liao S.J. (2001), "Shake table test study of bridge isolation system(I)-test significance and model design", Earthq. Eng. Eng. Vib., 4, 128-134.
22 Zheng, M.J., Wang, W.J., Chen, Z.N., et al. (2003), "Determination for mechanical constants of rubber Mooney-Rivlin model", Rubber Ind., 50(8), 462-465.