Browse > Article
http://dx.doi.org/10.4313/TEEM.2015.16.4.190

Insulation Breakdown Characteristics of Inverter Surge Resistant Enameled Wire Prepared with Organic/Inorganic Hybrid Nanocomposite  

Park, Jae-Jun (Department of Electrical and Electronic Engineering, Joongbu University)
Shin, Seong-Sik (Department of Electrical and Electronic Engineering, Joongbu University)
Lee, Jae-Young (Hydrogen Fuel Cell Parts and Applied Technology Regional Innovation Center, Woosuk University)
Han, Se-Won (The Korea Electrotechnology Research Institute)
Kang, Dong-Pil (The Korea Electrotechnology Research Institute)
Publication Information
Transactions on Electrical and Electronic Materials / v.16, no.4, 2015 , pp. 190-193 More about this Journal
Abstract
Insulation breakdown characteristics of an inverter surge resistant enameled wire were investigated in a twisted pair prepared with organic/inorganic hybrid nanocomposite. Organic polymer was polyesterimide-polyamideimide (EI/AI) and inorganic material was a nano-sized silica. The enamel thickness was 50 μm and the diameters of enameled copper wires were 0.75, 1.024, and 1.09 mm, respectively. There were many air gaps in a twisted pair. Therefore, when the voltage was applied to the twisted pair, enamel erosion took place in the air gap area because of partial discharge according to Paschen’s law. The insulation lifetime of the hybrid wire (HW) was 41,750 sec, which was 515.4 times more than the 81 sec of EI/AIW. In addition, the shape parameter of HW was 2.58, which was 3.4 times higher than 0.75 of EI/AIW.
Keywords
Enamel insulated wire; Partial discharge; Insulation lifetime; Insulation breakdown voltage;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 J. J. Park, Y. B. Park, and J. Y. Lee, Trans. Electr. Electron. Mater., 12, 93 (2011). [DOI: http://dx.doi.org/10.4313/TEEM.2011.12.3.93]   DOI
2 H. Kikuchi and H. Hanawa, IEEE Trans. Dielectr. Electr. Insul., 19, 99 (2012). [DOI: http://dx.doi.org/10.1109/TDEI.2012.6148507]   DOI
3 Y. Kikuchi, T. Murata, Y. Uozumi, N. Fukumoto, M. Nagata, Y. Wakimoto, and T. Yoshimitsu, IEEE Trans. Dielectr. Electr. Insul., 15, 1617 (2008). [DOI: http://dx.doi.org/10.1109/TDEI.2008.4712665]   DOI
4 M. Kaufhold, G. Borner, M. Eberhardt, and J. Speck, IEEE Electr. Insul. Mag., 12, 9 (1996). [DOI: http://dx.doi.org/10.1109/57.537190]   DOI
5 M. Kaufhold, H. Auinger, M. Berth, J. Speck, and M. Eberhardt, IEEE Trans. Industr. Electronics, 2, 396 (2000). [DOI: http://dx.doi.org/10.1109/41.836355]   DOI
6 S. R Chalise, S. Grzybowski, and C. D. Taylor, Proceeding of IEEE Electrical Ship Technologies Symposium (Baltimore, USA, 2009) p. 533.
7 S. Grzybowski, E. A. Feilat, and P. Knight, Proceeding of the 12th International Symponium on High Voltage Engineering (Bangalore, India, 2001) p. 521.
8 N. Hayakawa and H. Okubo, IEEE Electrical Insulation Magazine, 24, 22 (2008). [DOI: http://dx.doi.org/10.1109/MEI.2008.4473051]   DOI
9 E. Ildstad and S. R. Chalise, Annual Report Conference on Electrical Insulation and Dielectric Phenomena, p. 85 (2009). [DOI:http://dx.doi.org/10.1109/CEIDP.2009.5377720]   DOI
10 G. C. Stone, I. Culbert, E. A. Boulter, and H. Dhirani, IEEE Press Series on Power Engineering (2004).
11 E. Sugimoto, IEEE Electrical Insulation Magazine, 5, 15 (1989). [DOI: http://dx.doi.org/10.1109/57.16949]   DOI
12 H. Okubo, N. Hayakawa, and G. C. Montanari, IEEE Trans. Dielectr. Electr. Insul., 14, 1516 (2007). [DOI: http://dx.doi.org/10.1109/TDEI.2007.4401236]   DOI